• Title/Summary/Keyword: Wind Model

Search Result 3,601, Processing Time 0.037 seconds

Measurement of Dust Concentration in a Mechanically Ventilated Broiler House and Analysis of Dust Generation from Ground Beds (강제환기식 계사의 공기 중 분진 농도 측정 및 바닥재로부터의 분진 발생량 분석)

  • Kwon, Kyeong Seok;Jo, Ye Seul;Lee, In Bok;Ha, Tae Hwan;Hong, Se Woon
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.56 no.6
    • /
    • pp.31-43
    • /
    • 2014
  • Confined and mechanically ventilated broiler house has been recently come into wide use to increase productivity and control rearing conditions. However, high dust concentration inside facility can threaten respiratory welfare of farmers and broilers. In Korea, there is no regulation in terms of air quality control inside agricultural facilities and sufficient data is not available. To cope with these, periodic monitoring of inhalable and respirable dust concentration were conducted according to season, broiler's activity and specific events such as shipment work for broilers in mechanically ventilated broiler house. Chamber experiment was also designed to analyze mechanism of dust generation from ground beds according to water contents and surrounding wind environment. Results showed that significant increase of inhalable (p=0.002) and respirable (p=0.03) dust were observed when activity of broilers was high according to entrance of the workers. Even shipment work for matured broilers, high level of dust were observed; inhalable dust was exceeded the threshold limit over maximum 303 % and respirable dust was over maximum 1,550 %, implying that acute respiratory symptoms could be manifested for the workers. From the chamber experiment, critical water contents for interrupting of dust generation were measured; about 45 % for inhalable dust and about 50 % for respirable dust. These results can be a trigger for designing plan of dust control however it still needs consideration of various environmental conditions, hygiene problems, etc.

A Study on the Statistical Characteristics and Numerical Hindcasts of Storm Waves in East Sea (동해 폭풍파랑의 통계적 특성과 파랑 후측모의 실험에 관한 연구)

  • Chun, Hwusub;Kang, Tae-Soon;Ahn, Kyungmo;Jeong, Weon Mu;Kim, Tae-Rim;Lee, Dong Hwan
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.26 no.2
    • /
    • pp.81-95
    • /
    • 2014
  • In the present study, the statistical analysis on the storm waves in the East Sea have been carried out, and the several storm waves were reproduced by the modified WAM as a first step for the accurate and prompt forecasting and warning against the swell waves in East Sea. According to the present study, the occurrences of the storm waves from the North were the most probable, while the waves from the Northeast were most frequently observed. It was found that the significant wave heights of storm waves from the North and Northern northeast were larger than those of storm waves from the Northeast. But due to long fetch distance, the significant wave periods of storm waves from the Northesast were longer than those of North and Northern northeast. In addition to the wave analysis, the numerical experiments for the storm waves in East Sea were carried out using the modified WAM, and three periods of storm waves in 2013 were calculated. The numerical results were well agreed with wave measurements. However the numerical simulation results in shallow water region showed lower accuracies compared to deep water, which might be due to lower resolution of wind field and bottom topography caused by large grid size, 5 minute, adopted in the present study. Overall computational efficiency of the modified WAM found to be excellent compared to original WAM. It is because the modified WAM adopted the implicit scheme, thereby the present model performed 10 time faster than original WAM in computation time.

Measurement of Dynamic Stability Derivatives of Tailless Lamda-shape UAV using Forced Oscillation Method (강제진동 기법을 이용한 무미익 비행체의 동안정 미계수 측정)

  • Yang, Kwangjin;Chung, Hyoungseog;Cho, Donghyun;An, Eunhye;Ko, Joonsoo;Hong, JinSung;Kim, Yongduk;Lee, MyungSup;Hur, Gi-Bong
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.44 no.7
    • /
    • pp.552-561
    • /
    • 2016
  • In this experimental study, the dynamic stability derivatives of a tailless lambda-shape UAV are estimated from time history data of aerodynamic moments measured from the internal balance while the test model is forced to oscillate at given frequencies and amplitudes. A 3-axis forced oscillation apparatus is designed to induce decoupled roll, yaw, pitch oscillations respectively. The results show that the roll damping derivatives remain stable at the entire range of angle of attack tested, whereas the pitch damping derivatives become unstable beyond $15^{\circ}$ angle of attack. The amplitude and frequency have little impact on roll damping derivatives while the smaller amplitude and frequency of oscillation improves the pitch stability. The yaw damping derivative values are fairly small as expected for a tailless configuration. The results indicate that the proposed methodology and test apparatus area valid for estimating the dynamic stability derivatives of a tailless UAV.

Intercomparison between Temperature and Humidity Sensors of Radiosonde by Different Manufacturers in the ESSAY (Experiment on Snow Storms At Yeongdong) Campaign (대설관측실험(Experiment on Snow Storms At Yeongdong: ESSAY) 기간 중 두 제조사 라디오존데 기온과 습도 센서 상호 비교)

  • Seo, Won-Seok;Eun, Seung-Hee;Kim, Byung-Gon;Seong, Dae-Kyeong;Lee, Gyu-Min;Jeon, Hye-Rim;Choi, Byoung-Cheol;Ko, A-reum;Chang, Ki-Ho;Yang, Seung-Gu
    • Atmosphere
    • /
    • v.26 no.2
    • /
    • pp.347-356
    • /
    • 2016
  • Radiosonde is an observation equipment that measures pressure (geopotential height), temperature, relative humidity and wind by being launched up from the ground. Radiosonde data which serves as an important element of weather forecast and research often causes a bias in a model output due to accuracy and sensitivity between the different manufacturers. Although Korean Meteorological Administration (KMA) and several institutes have conducted routine and intensive radiosonde observations, very few studies have been done before on the characteristics of radiosonde performance. Analyzing radiosonde observation data without proper understanding of the unique nature of those sensors may lead to a significant bias in the analysis of results. To evaluate performance and reliability of radiosonde, we analyzed the differences between two sensors made by the different manufacturers, which have been used in the campaign of Experiment on Snow Storm At Yeongdong (ESSAY). We improved a couple of methods to launch the balloon being attached with the sensors. Further we examined cloud-layer impacts on temperature and humidity differences for the analysis of both sensors' performance among various weather conditions, and also compared daytime and nighttime profiles to understand temporal dependence of meteorological sensors. The overall results showed that there are small but consistent biases in both temperature and humidity between different manufactured sensors, which could eventually secure reliable precisions of both sensors, irrespective of accuracy. This study would contribute to an improved sounding of atmospheric vertical states through development and improvement of the meteorological sensors.

Application of Ventilation Corridor to Mitigate Particulate Matter for the Sejong-Si (미세먼지 저감대책으로서 바람길 적용 방안 : 세종시를 대상으로)

  • Nam, Seongwoo;Sung, Sunyong;Park, Jong-Soon
    • The Journal of the Korea Contents Association
    • /
    • v.20 no.3
    • /
    • pp.1-9
    • /
    • 2020
  • The purpose of this study is to verify the effects of ventilation corridor and derive adequate policy alternatives to its application for the city of Sejong, which is located in an inland of Korean Peninsula. In order to introduce the ventilation corridor in the city, it is necessary both to understand change on fresh air flow affected by the construction of new cities and to show its effects which are able to circulate air flow of the city. The study identified ventilation effects using computational fluid dynamics models. In particular, it analyzed change on wind speed and direction after constructing of a new town and cool air flow along the lowlands generated after sunset. In addition, it identified those of reducing particulate matter when arranging buildings conforming to the ventilation corridor at block level. The policy implications derived from simulation can be summarized as follows. First, it is desirable to plan ventilation corridors so that fresh air from mountains, forests, and valleys can flow into cities and mitigate the concentration of particulate matter. Furthermore, public facilities covering parks, plazas, and playgrounds should be installed preferentially to attract safe outdoor activities near to areas with low levels of particulate matter. Finally, it is adequate to prepare for a number of alternative plans by analyzing ventilation corridors when setting out district unit plan.

A Study on Lightweight Design of Cantilever-type Helideck Using Topology Design Optimization (위상 최적설계를 활용한 캔틸레버식 헬리데크 경량화 연구)

  • Jung, Tae-Won;Kim, Byung-Mo;Ha, Seung-Hyun
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.30 no.5
    • /
    • pp.453-460
    • /
    • 2017
  • In the offshore industry, helicopters are mainly used for transportation of goods or operating personnel between offshore sites and onshore facilities. A helideck is a structure that is required for landing and take-off of helicopters on the offshore structure. There are several shapes of helidecks depending on the type of offshore structures or installation location. Among them, cantilever-type helidecks usually provide more space on the topside of offshore structures and it is safer against potential accidents like fire or explosion. In this paper, the cantilever-type helideck is selected for the research object and topology design optimization is applied for lightweight design of the helideck. A finite element model is then created from the optimal layout of truss structures of the helideck, and structural analysis is performed under various landing conditions and wind loads. Based on the analysis results, the detailed section dimensions of structural members are determined so that the maximum stress at each structure member does not exceed the allowable stress of the structural material. Also, the final optimal design shows significant decrease in the total weight of the helideck.

Numerical Interpolation on the Simulation of Air Flow Field and the Effect of Data Quality Control in Complex Terrain (객관 분석에 의한 복잡지형의 대기유동장 수치모의와 모델에 의한 자료질 조절효과)

  • Lee Hwa woon;Choi Hyun-Jung;Lee Kang-Yoel
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.21 no.1
    • /
    • pp.97-105
    • /
    • 2005
  • In order to reduce the uncertainties and improve the air flow field, objective analysis using asynoptic observational data is chosen as a method that enhances the reality of meteorology. In surficial data and their numerical interpolation for improving the interpretation of meteorological components, objective analysis scheme should perform a smooth interpolation, detect and remove the bad data and carry out internal consistency analysis. For objective analysis technique which related to data reliability and error suppression, we carried out two quality control methods. In site quality control, asynoptic observational data at urban area revealed low representation by the complex terrain and buildings. In case of wind field, it was more effective than temperature field when it were interpolated near waterbody data. Many roads, buildings, subways, vehicles are bring about artificial heat which left out of consideration on the simulation of air flow field. Therefore, in temperature field, objective analysis for more effective result was obtained when surficial data were interpolated as many as possible using value quality control rather than the selection of representative site.

Pilot Study on the Typhoon for the Meteorological Information Application and Disaster Prevention (기상정보 활용 및 방재를 위한 태풍 사례 연구)

  • Park, Jong-Kil;Jung, Woo-Sik;Choi, Hyo-Jin
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.7 no.1 s.24
    • /
    • pp.21-28
    • /
    • 2007
  • It is very difficult to forecast accurately a damage from the natural disaster which occurs frequently due to the climate change. When the significant weather event is forecast, it will be able to minimize a damage with the suitable prevention action. But 2000's our country meterological disaster damage is a several trillion won. Therefore, this paper analyzes Korea Meterological Administration, Japan Meterological Agency, television and newspaper have reported, information substance, transmission system, an ex post facto valuation about typhoon Nabi between september $5{\sim}7$ in 2005 and heavy rainfall in 1998 at Japan. Through the investigation, we want to present basic data order to rises the application effect of disaster prevention meterological information. We think KMA must present many information report to promote a people's understanding about the meterological information and the serious disaster situation. Also the disaster damage estimation model development is necessary, which forecasts the accurate damage scale due to the weather event, such as typhoon, heavy rainfall, strong wind. And also we think the KMA, National Emergency Management Agency, related agency, television and newspaper must positive reports the contents which is suitable to disaster response phases and an ex post facto examination. Then it grasps the problem of disaster prevention meterological information and must improve effectively.

The Estimation of Succession Index by Community Types in the Natural Deciduous Forest of Mt. Jumbong (점봉산 일대 천연활엽수림의 군집 유형별 천이지수 추정)

  • Jin, Guang Ze;Kim, Ji Hong
    • Journal of Korean Society of Forest Science
    • /
    • v.95 no.6
    • /
    • pp.723-728
    • /
    • 2006
  • Since the forest succession is changing process in the structure and function of a forest for the long period of time, the objectivity of the process could be improved through the development of model or statistical methodology. This study was carried out to estimate succession index based on climax index and species composition parameters, thereupon to compare the succession index with life form and species diversity so as to grasp the information of quantitative successional process for the six community types in the natural deciduous forest of Mt. Jumbong area. The results indicated that Quercus mongolica-Tilia amurensis community had the greatest succession index of 67.5, followed by Abies holophylla-Fraxinus mandshurica community with 67.4. Juglans mandshurica-Cornus controversa community was recorded the smallest value of 60.5. The succession index of overstory tended to increase considerably at the stage of steady state for all community types except Quercus mongolica-Tilia amurensis community. However, The index of midstory hardly varied as the forest succession would progress for all community types. The succession index was negatively correlated to wind-water dispersion type of life form and positively to animal dispersion type at the 5% probability level. On the other hand, the index was not significantly correlated to the species richness and Shannon's species diversity index.

THE VLBI MONITORING PROJECT FOR 6.7 GHz METHANOL MASERS USING THE JVN/EAVN

  • SUGIYAMA, KOICHIRO;FUJISAWA, KENTA;HACHISUKA, KAZUYA;YONEKURA, YOSHINORI;MOTOGI, KAZUHITO;SAWADA-SATOH, SATOKO;MATSUMOTO, NAOKO;SAITO, YU;HIRANO, DAIKI;HAYASHI, KYONOSUKE;SHEN, ZHIQIANG;HONMA, MAREKI;HIROTA, TOMOYA;MURATA, YASUHIRO;DOI, AKIHIRO;NIINUMA, KOTARO;DODSON, RICHARD;RIOJA, MARIA;ELLINGSEN, SIMON;CHEN, XI;KIM, KEE-TAE;OGAWA, HIDEO
    • Publications of The Korean Astronomical Society
    • /
    • v.30 no.2
    • /
    • pp.645-647
    • /
    • 2015
  • We have initiated a Very Long Baseline Interferometer (VLBI) monitoring project of 36 methanol maser sources at 6.7 GHz using the Japanese VLBI Network (JVN) and East-Asian VLBI Network (EAVN), starting in August 2010. The purpose of this project is to systematically reveal 3-dimensional (3-D) kine-matics of rotating disks around forming high-mass protostars. As an initial result, we present proper mo- tion detections for two methanol maser sources showing an elliptical spatial morphology, G 002.53+00.19 and G 006.79-00.25, which could be the best candidates associated with the disk. The detected proper motions indicate a simple rotation in G 002.53+00.19 and rotation with expansion in G 006.79-00.25, respectively, on the basis of disk model fits with rotating and expanding components. The expanding motions might be caused by the magnetic-centrifugal wind on the disk.