• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.363-371
• /
• 2014

Most space-borne optical scanning systems adopt linear arrayconfigurations. The well-knownthree different types of space-borne sensors arealong-track line scanner, across-track linescanner, and three line scanner. To acquire accurate location information of an object on the ground withthose sensors, the exterior and interior orientation parameters are critical factors for both of space-borne and airborne missions. Since the imaging geometry of sensors mightchange time to time due to thermal influence, vibration, and wind, it is very important to analyze the Interior Orientation Parameters (IOP) effects on the ground. The experiments based on synthetic datasets arecarried out while the focal length biases are changing. Also, both high and low altitudes of the imagingsensor were applied. In case with the along-track line scanner, the focal length bias caused errors along the scanline direction. In the other case with the across-track one, the focal length bias caused errors alongthe scan line and vertical directions. Lastly, vertical errors were observed in the case ofthree-line scanner. Those results from this study will be able to provide the guideline for developing new linearsensors, so as for improving the accuracy of laboratory or in-flight sensor calibrations.

• Korean Journal of Food Science and Technology
• /
• v.32 no.5
• /
• pp.1128-1134
• /
• 2000

This study was carried out to evaluate quality properties of gamma-irradiated Kwamegi prepared from Cololabis seira semi-dried by cold sea wind. Edible portion of Kwamegi was prepared from whole body, vacuum-packaged, gamma-irradiated in the doses of 3 or 5 kGy, and stored at $5^{\circ}C$ for 60 days. Volatile basic nitrogen and trimethylamine contents were not different by gamma irradiation. During storage increase of those two compounds were inhibited depending upon the dose. Thiobarbituric acid values did not differ in all samples, regardless of irradiation and storage. The amount of total volatile compounds of Kwamegi decreased by irradiation. Rheological properties were not affected by irradiation and were maintained up to 60 day when the Kwamegi was irradiated at 5 kGy dose, but those of control was softened. Sensory evaluation had no differences in all samples immediately after irradiation. Sensory quality of Kwamegi irradiated were organoleptically adequate, however that of control was deteriorated. In conclusion, these results indicate that gamma irradiation technique can be used to maintain the quality of Kwamegi.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.10
• /
• pp.473-478
• /
• 2017

Drones require altitude holding in order to achieve flight objectives. The altitude holding of the drone is to repeat the operation of raising or lowering the drone according to the altitude information being measured in real-time. When the drones are maintained altitude, the drone's altitude will continue to change due to external factors such as imbalance in thrust due to difference in motor speed or wind. Therefore, in order to maintain the altitude of drone, we have to exactly measure the continuously changing altitude of the drone. Generally, the acceleration sensor is used for measuring the height of the drones. In this method, there is a problem that the measured value due to the integration error accumulates, and the drone's vibration is recognized by the altitude change. To solve the difficulty of the altitude measurement, commercial drones and existing studies are used for altitude measurement together with acceleration sensors by adding other sensors. However, most of the additional sensors have a limitation on the measurement distance and when the sensors are used together, the calculation processing of the sensor values increases and the altitude measurement speed is delayed. Therefore, it is necessary to accurately measure the altitude of the drone without considering additional sensors or devices. In this paper, we propose a measurement algorithm that improves general altitude measurement method using acceleration sensor and show that accuracy of altitude holding and altitude measurement is improved as a result of applying this algorithm.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_2
• /
• pp.831-840
• /
• 2019

Recently, the span length of long-span bridges is getting longer. As a result, it has been suggested that a new concept called 'super long-span bridge'. In case of super long span bridges, the structure is being complicated and the importance of structural stability is being emphasized. However, until recently, the most commonly used sensors (dual axis clinometer, anemometer, strain gauge, etc.) have got limit about the bridge monitoring. Consequently, we researched the application of a Global Navigation Satellite System (GNSS) to improve the limit of the existing sensors. In this study, the dual axis clinometer, the anemometer and the strain gauge together with the GNSS were used to analyze the behavior of a super-long suspension bridge. Also, we propose the detailed method of bridge monitoring using the GNSS. This study consisted of three steps. First step calculated the absolute coordinates of the towers and the longitudinal axis direction of the study bridge using the GNSS. In second step, through the analysis of the long-term behavior in shortly after construction, we calculated the permanent displacement and evaluated the stability of main towers. Third step analyzed the behavior of bridge by the wind direction and was numerically indicated. Consequently, the bridge measurement using the GNSS appeared that the acquired data is able to easy processing according to the analysis purpose. If we will use together the existing measurement sensors with the GNSS on the maintenance of the super long-span bridge, we figure each error of measurement data and improve the monitoring system through calibration. As a result, we acquire the accurate displacement of bridge and figure the behavior of bridge. Consequently, we identified that it is able to construct the effective monitoring system.

• Korean Journal of Food Science and Technology
• /
• v.51 no.1
• /
• pp.29-34
• /
• 2019

In this study, a commercial production stepwise method for restorative rice with high quality and microbial safety was developed. The stepwise treatment method included steaming, refrigerated aging, and low temperature drying. The soaking rice was steamed twice at $90-100^{\circ}C$, and then, the rice was aged at $0-10^{\circ}C$, frozen at $-20^{\circ}C$, and dried at low temperatures with 5 m/s wind speed at $1-20^{\circ}C$ and 85% relative humidity. Applying the three steps improved sensory qualities compared with the conventional hot air drying and made storage at room temperature for 3 months possible. Specifically, the moisture content of the restorative rice was increased to 30%, which was 4.3 times higher than the 7% of the conventional air dried rice, and the rice grain shape was well maintained. The texture and appearance of the three-step rice were significantly improved (p<0.05) in a sensory evaluation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.953-959
• /
• 2018

This paper deals with controlling surge oscillations of a mooring vessel system under large external disturbances such as wind, waves and currents. A control synthesis based on Sliding Mode Control (SMC) with a Super-Twisting Algorithm (STA) has been applied to suppress nonlinear surge oscillations of a two-point mooring system. Despite the advantages of robustness against parameter uncertainties and disturbances for SMC, chattering is the main drawback for implementing sliding mode controllers. First-order SMC shows convergence within the desired level of accuracy, in which chattering is the main obstacle related to the destructive phenomenon. Alternatively, STA completely eliminates chattering phenomenon with high accuracy even for large disturbances. SMC based on STA is an effective tool for the motion control of a nonlinear mooring system because it avoids the chattering problems of a first-order sliding mode controller. In addition, the error trajectories of controlled mooring systems implemented by means of STA form in the bounded region. Finally, the control gain effect of STA can be observed in sliding surface and position trajectory errors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.2
• /
• pp.327-333
• /
• 2019

For sustainable lunar exploration, the most required resources should be procured on site because it takes tremendous cost to transfer the resources from the Earth to the Moon. The technologies required for use of lunar resources refers to In-Situ Resource Utilization (ISRU). As the ISRU technology cannot be verified in the Earth, a lunar surface environment simulator is necessary to be prepared in advance. The Moon has no atmosphere, and the average temperature of the lunar surface reaches to $107^{\circ}C$ during the daytime and $-153^{\circ}C$ at night. The lunar surface is also covered with very fine soils with sharp particles that are electrostatically charged by solar radiation and solar wind. In this research, generation of vacuum environment with lunar soil mass in a chamber and simulation of electrostatically charged soils are taken into consideration. It was successful to make a vacuum environment of a chamber including lunar soils without soil disturbance by controlling evacuation rate of a vacuum chamber. And an experiment procedure for simulating the charged lunar soil was suggested by theoretical consideration in charging phenomena on lunar dust.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.2
• /
• pp.19-26
• /
• 2019

Pungsu theory is important one in the site selection and lay-out of traditional Korean village and house. In this aspect, Study with a view of Pungsu theory might be used as a proper method for understanding the traditional architecture in Korea. In this context, this study analyzes the Jeong, Dong-Ho's house which is designated no. 19 as an important folk cultural heritage, located in Jigok Ochu-gil 133-62, Godeok-myon, Yesan-gun, Chungnam province. The analysis of the site and space lay-out is carried out by Yong(Dragon), Hyoel(Auspicious Spot), Sa(Sands), Su(Water) aspects of the Pungsu(Fengshui) Hyungsei-ron. The house is depending upon soft dragon vein connecting with a earth type rear mountain. It looks southeast direction, Gonjwasonhyang(乾坐巽向). The hyeolseong(穴星) has classical venus shape, and there is no faults relatively. The Sasinsa condition is almost perfect that right blue dragon and left white tiger surround the hyeol with 3-4 layers and the facing mountain covers the front open area. The water flowing from inside of left and right mountain is joined in front of the house so it could stop flowing out of vital energy. Bibo forest(裨補樹) is placed properly to protect the easy disclose of water outlet. The house is well organized western house(西四宅) by analysis of Dongseosataek-ron(東西四宅論). Through the analysis, I found that the house has good Pungsu(Fengshui) environment fitted with Pungsu Hyungsei-ron. The house composed of small thatched roof is enclosed several times by low hills of back, left and right side. So it is believed that the site might be carefully evaluated by Yong, Hyoel, Sa, Su of Hyeongsei-ron for knowing whether the site condition could minimize the demage by strong winds and protect from the winter cold wind and secure water for drinking and farming and then selected. The method of Pungsu for evaluating the geographical condition of surrounding of a site is used as a traditional site analysis method for evaluating the suitability of long-term well and safe residence.

• Journal of the Korean Society for Environmental Technology
• /
• v.19 no.6
• /
• pp.576-585
• /
• 2018

Systematic management during the whole life cycle from construction to operation and maintenance is very important for the seven underground pipelines (waterworks, sewerage, electricity, telecommunications, gas, heating, oil including waterworks and sewerage). Especially, it is the construction process that affects the whole life cycle of underground buried pipeline. In order to construct a new city or to maintain different underground pipes, it is always necessary to dig the ground and carry out construction and related work. There is a possibility that secondary and tertiary breaks frequently occur in the pipeline construction process after the piping constructed first in this process. To solve this problem, a system is needed which can monitor damage in real time. However, the supply of electric power for continuous operation of the system is limited according to the environment of underground buried pipelines, so it is necessary to develop a stable electric power supply system using natural energy rather than existing electric power. In this study, we developed a system that can operate the pipeline monitoring system for long time (24 hours and 15 days) using natural energy using wind and solar light.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.525-532
• /
• 2021

In the ocean, it is difficult to separate the effects of one cause due to the multiple causes, but the self-organizing map can be analyzed by adding other factors to the cluster result. Therefore, in this study, the results of the clustering of sea level data were applied to sea surface temperature. Sea level data was clustered into a total of 6 nodes. The difference between sea surface temperature and sea level height has a one-month delay, which applied sea surface temperature data a month ago to the clustered results. As a result of comparing the mean of sea surface temperature of 140 to 150°E, where the sea surface temperature was variously distributed, in the case of nodes 1, 3, and 5, it was possible to find a meandering sea surface temperature distribution that is clearly distinguished from the sea level data. While nodes 2, 4 and 6, the sea surface temperature distribution was smooth. In this study, sea surface temperature data were applied to the clustered results of sea level data, but later it is necessary to apply wind or geostrophic velocity data to compare.