• 한국임상보건과학회지
• /
• 제2권1호
• /
• pp.17-23
• /
• 2014

Purpose. This study was to investigate the relationship between the palpebral fissure size and the exophthalmos in a population of Korean adult women subjects with normal eye status. Methods. From November 2012 to September 2013, The authors analyzed the morphological values in 73 Korean adults population. The test was performed using the Hertel exophthalmometer and verner califer. Analysis of subjects data were recorded using the spss version 20.0 a statistical program (IBM Co, Armonk, NY USA). Results. The average age of the 73 subjects (146 eyes) was (21.219+/-0.261)mm. the average value of palpebral fissure was (25.110+/-1.646)mm in width and (8.096+/-1.464)mm in height. The average value of exophthalmos was (15.002+/-1.922)mm. There was a significant relationship(P>0.05) in the average size between the width and height in palpebral fissure. Also, there was a significant relationship(P>0.05) in the average size between the palpebral fissure width and exophthalmos. On the other hand, there was a significant relationship(P>0.01) in the average size of palpebral fissure height and exophthalmos. Conclusions: In this study, these results suggested that the palpebral fissure and exophthalmos had a significant relationship in the average value of size in Korean adult women population.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.468-475
• /
• 2007

The Steel deck a structural analysis in head plate form change the objective bridge which it sells it accomplished a detailed structural analysis from the research which it sees and Bulk-head plate it accomplished. The length rib where the fatigue crack which is considerable generally occurs, width rib connection department and the length rib side, the width rib side it compares principal stress in the object and it does to sleep. It applied the grudge element model which it describes consequently after words and a load and a boundary condition and it executed it compared a static test and principal stress. It grasped the stress conduct of the The Steel deck petal which it follows in hand weaving rib affix location and the affix location to sleep in order to analyze a same location Bulk-head the head and comparison considered. From the detailed section which is reinforced with the stress investigation result hand weaving rib of the location which is weak in structural analysis result fatigue crack of form star reinforcement details basic form and Bulk-head the form which is reinforced with the head plate compared to principal stress investigation hour it is judged at the section which separates most.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1505-1509
• /
• 2004

A novel technique for fine particle beam focusing under the atmospheric pressure is introduced using a radiation pressure assisted aerodynamic lens. To introduce the radiation pressure in the aerodynamic focusing system, a 25 mm plano-convex lens having 2.5 mm hole at its center is used as an orifice. The particle beam width is measured for various laser power, particle size, and flow velocity. In addition, the effect of the laser characteristics on the beam focusing is evaluated comparing an Ar-Ion continuous wave laser and a pulsed Nd-YAG laser. For the pure aerodynamic focusing system, the particle beam width was decreased as increasing particle size and Reynolds number. For the particle diameter of 0.5 ${\mu}m$, the particle beam was broken due to the secondary flow at Reynolds number of 694. Using the Ar-Ion CW laser, the particle beam width becomes smaller than that of the pure aerodynamic focusing system about 16 %, 11.4 % and 9.6 % for PSL particle size of 2.5 ${\mu}m$, 1.0 ${\mu}m$, and 0.5 ${\mu}m$ respectively at the Reynolds number of 320. Particle beam width was minimized around the laser power of 0.2 W. However, as increasing the laser power higher than 0.4 W, the particle beam width was increased a little and it approached almost a constant value which is still smaller than that of the pure aerodynamic focusing system. The radiation pressure effect on the particle beam width is intensified as Reynolds number decreases or particle size increases relatively. On the other hand, using 30 Hz pulsed Nd-YAG laser, the effect of the radiation pressure on the particle beam width was not distinct unlike Ar-Ion CW laser.

• 한국도로학회논문집
• /
• 제12권3호
• /
• pp.147-154
• /
• 2010

포스트텐션 콘크리트 포장(PTCP: Post-Tensioned Concrete Pavement)에서 강선의 긴장 간격 설계와 더불어 주요 설계 인자로서 줄눈의 초기 설계 폭을 들 수 있다. 줄눈 폭의 결정은 소음과 승차감에 직접 영향을 미치며 초기 폭이 과도하게 크면 소음과 승차감에 악영향을 미치게 되며, 초기 폭이 지나치게 작게 되면 하절기 온도상승으로 블로우업 현상이 발생할 수 있으며 또한 과도한 압축응력에 의해 줄눈부의 파손이 발생할 수 있다. 따라서 본 연구는 PTCP의 초기 줄눈 폭 설계를 최적화하고 온도변화에 따른 줄눈 폭의 거동을 분석하기 위하여 수행되었다. 시공 후 1년이 경과한 PTCP 슬래브를 대상으로 줄눈 폭에 대한 실험을 수행하였다. 콘크리트의 온도는 PTCP 슬래브에 온도측정 센서를 깊이별로 설치하여 측정하였고, 줄눈 폭의 측정은 버어니어캘리퍼스를 이용하여 하루 중 다양한 시간대에 측정하여 온도와 줄눈 폭과의 연관성을 분석하였다. 본 연구를 통해 시공초기 최적화된 줄눈 폭 설계방안을 제시하였다.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.1001-1009
• /
• 2012

The purpose of this study was to provide information on how to improve both the satisfaction and the current sizing system for the school summer uniform focused on middle and high school students. In order to collect the data, a questionnaire was administered to middle and high school students, and 1,153 data were analyzed. For the satisfaction of their school uniform, there were statistical differences in mean of gender in the design(upper garment) and design & activity(lower garment). On the other hand, students' evaluation of summer school uniform was significantly different in the upper garment(textile, design, activity), and lower garment(design, activity) by school age. For the evaluation of sizing fitness, the length and width of the summer upper garment(blouse/shirts) and the length and width of the summer garments( pants/skirts) were statistical differences in mean of gender or sexuality whereas there were significant differences in the summer upper garment(length, width, the length of sleeve, the width of sleeve, armhole) and the summer lower garment(length, width) by school age.

• 스마트미디어저널
• /
• 제8권3호
• /
• pp.47-52
• /
• 2019

In this paper, we designed HW / SW interfaces for processing the signals of capacitive sensors like Electric Potential Sensor (EPS) to detect the surrounding electric field disturbance as feature signals in motion recognition systems. We implemented a smart light control system with those interfaces. In the system, the on/off switch and brightness adjustment are controlled by hand gestures using the designed and fabricated interface circuits. PWM (Pulse Width Modulation) signals of the controller with a driver IC are used to drive the LED and to control the brightness and on/off operation. Using the hand-gesture signals obtained through EPS sensors and the interface HW/SW, we can not only construct a gesture instructing system but also accomplish the faster recognition speed by developing dedicated interface hardware including control circuitry. Finally, using the proposed hand-gesture recognition and signal processing methods, the light control module was also designed and implemented. The experimental result shows that the smart light control system can control the LED module properly by accurate motion detection and gesture classification.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.76-84
• /
• 2003

Stereolithography is the technique using a laser beam to cure a liquid resin, a photopolymer, with three dimensional computer-aided design (CAD) data. The build parameters of stereolithography such as beam size, scan velocity. hatch spacing, layer thickness and etc. are determined by the accuracy of prototype, the build time and the cured properties of the resin. In particular, beam size is important processing parameter fur the other parameters. Therefore, this study observed the cured property to beam size. For this purpose, according to hatch spacing and beam size, the cure width and depth were measured on single cured line. Also, the cure width and depth were measured at single cured layer As a result of experiments. cure depth which varied from 0.23mm to 0.34mm was directly proportioned to beam radius. on the other hand, cure width which varied from 0.42mm to 1.07mm was inversely proportioned to beam radius. Surface roughness varied from 1.12 to 2.23 m for the ratio of hatch spacing to beam radius.

• 한국지구과학회지
• /
• 제31권4호
• /
• pp.348-353
• /
• 2010

태양 복사의 지구 대기 산란광을 근 적외선 영역에서 분광 관측하여 $H_2O$와 $O_2$ 흡수선을 측정하고 이것으로 태양 복사량에 따른 두 기체의 등가폭 변화를 계산하였다. $O_2$는 태양 복사량이 증가할수록 등가폭이 줄어들고 복사량이 감소할수록 커지는 경향을 보였고, $H_2O$는 그 반대의 경향을 보였다. 특히 두 기체가 만드는 흡수선 등가폭의 합은 하루 중에 대체로 일정한 경향을 보였다. 본 연구에서는 이것이 태양광에 의한 광해리와 재결합이 $O_2$와 $H_2O$에 있어서 상호 보완적으로 일어나기 때문으로 추측한다.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.33-42
• /
• 2017

PURPOSES : The purpose of this study is to suggest the construction and quality control method for the re-repair of a deteriorated partial depth repair for sections of Portland cement concrete pavement. METHODS : An experimental construction was conducted to extend the repair width for removing an existing repair section. A removal method was used to ensure early performance for a deteriorated partial depth repair section. Bond strength and split tensile strength were measured at the near vertical interface layer between the existing pavement and repair material. The area was analyzed for various conditions such as the extended repair area and the removing method of the existing repair section. RESULTS : As a result of analysis of bond strength and split tensile strength, the bonding performance of a milling removed section was improved over a cutting and hand breaker removed section. The bond strength was analyzed to increase slightly as the extended repair width for removing the existing repair section increased. The split tensile strength did not show a clear relationship to an increased extended repair width of an existing removed repair section. CONCLUSIONS : The milling removal method should be applied in the removal of existing deteriorated partial depth repair sections. The extended repair width for a re-repair section should be wider than the existing partial depth repair with at least a 75-mm length and width for the bond strength and the split tensile strength.

• 한국건설순환자원학회논문집
• /
• 제6권4호
• /
• pp.245-251
• /
• 2018

최근 구조물의 유지관리의 중요성이 부각되면서 자기치유 콘크리트 기술 분야의 연구가 활발히 이루어지고 있다. 이에 반해서 자기치유 성능을 평가하기 위한 척도는 부족한 실정이다. 균열폭을 측정하기 위한 방법으로 시각적인 방법이 1차적으로 사용되고 있으나 시편 내부의 균열폭을 관찰하기가 어려우며, 비균질한 균열특성으로 인해 표면에 대한 국부적인 측정만 할 수 있는 단점이 있다. 균열에 대한 간접적인 평가 방법으로 투수실험이 널리 활용되고 있지만 물의 점성으로 인한 문제가 있으며, 또한 실험 중 시편내부 물질의 용출될 가능성이 존재한다. 본 연구에서는 기체확산 특성을 활용한 균열폭 평가 방법을 제안하고자 하였다. 아크릴로 이상화된 직선균열을 제작하여 균열폭, 두께에 따른 시편의 확산계수를 분석하였다. 실험결과를 통하여 균열폭과 확산계수는 선형관계에 있음을 보였고, 두께와 확산계수는 역수의 관계에 있음을 증명하였다.