• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.195-196
• /
• 2007

Since the digital TV signal band is very wide ($54{\sim}806MHz$), the VCO used in the frequency synthesizer must also have a wide frequency tuning range. Multiple LC VCOs have been used to cover such wide frequency band. However, the chip area increases due to the increased number of integrated inductors. In this paper, a scheme is proposed to cover the full band using only one VCO. The RF VCO block designed using a 0.18um CMOS process consists of a wideband LC VCO, five divide-by-2 circuits and several buffers. The simulation results show that the designed circuit has a phase noise at 10kHz better than -87dBc/Hz throughout the signal band and consumes 10mA from a 1.8V supply.

• 한국ITS학회 논문지
• /
• 제12권6호
• /
• pp.37-43
• /
• 2013

본 논문에서는 SIR(Stepped Impedance Resonator) 구조를 이용한 초광대역(UWB:Ultra Wide Band) 개방형 스터브 대역통과 여파기를 제안한다. 제안한 개방형 스터브 대역통과 여파기는 초광대역을 구현하기 위해 스터브 위치에 SIR 구조를 적용하였으며 낮은 삽입손실을 갖는다. 제안된 대역통과 여파기의 대역폭은 중심 주파수 5.8GHz에서 103% 이고, 삽입 및 반사손실은 각각 0.17dB 및 13.1dB이며 전체의 크기는$21.6{\times}17.8mm^2$ 이다.

• 대한전자공학회논문지TC
• /
• 제41권7호
• /
• pp.75-79
• /
• 2004

본 논문에서는 MMIC 및 LTCC등과 같이 집적화 회로에 이용할 수 있는 단일 평판 구조의 광 대역 안테나를 설계 및 제작하였다. 무지향 패턴의 광대역 마이크로스트립 안테나의 새로운 구조를 제안하였다. 안테나 구조는 다이폴 안테나구조를 응용한 폴디드(folded) 마이크로스트립 안테나이며 CPW급전 방식을 사용하였다. 이 때 단일 평판구조의 접지면의 유한성에 의한 안테나 특성의 안정성에 영향을 미치게 된다. 따라서 본 연구에서 접지면을 증가시키고자 마크로스트립 루프 안테나의 외곽에 폴디드 구조의 접지면을 확장하였다. FDTD방법을 이용하여 안테나의 특성을 해석하였다. 제안한 안테나는 PCS 대역(1.75∼1.87㎓)과 IMT2000(1.92∼2.17㎓) 대역 및 ISM 대역에 적합한 주파수 대역을 얻었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.533-534
• /
• 2008

This paper presents a multi-phase ring VCO for low-cost, low-power GPS receiver. In the RF band used in GPS, L1 band is now in commercial-use and L2,L5 are predicting to be commercial-use soon. Thus Wide band PLL and Cost-effective IC solutions are required for future multi-band GPS receiver that received three types band at once. A new PLL architecture for multi-band GPS application is proposed. Ring VCO is even smaller than LC-VCO and a good alternative for low-cost solution. Proposed multi-phase ring VCO offers wide frequency range covering L1, L2, and L5 band, 20% reduction of area, 23% reduction of PLL power and can generate I/Q without extra I/Q generator.

• 대한조선학회논문집
• /
• 제48권4호
• /
• pp.299-307
• /
• 2011

The offshore plants such as FPSO are subjected to combination loading of environmental conditions (swell, wave, wind and current). Therefore the fatigue damage is occurred in the operation time because the units encounter the environmental phenomena and the structural configurations are complicated. This paper is a research for frequency domain fatigue analysis of wide-band random loading focused on accuracy of fatigue damage estimation regarding the proposed methods. We selected ideal bi-modal spectrum. And comparison between time-domain fatigue analysis and frequency-domain fatigue analyses are conducted through the fatigue damage ratio. Fatigue damage ratios according to Vanmarcke's bandwidth parameter are founded for wide-band. Considering safety, we recommend that Jiao-Moan and Tovo-Benasciutti methods are optimal way at the fatigue design for wide-band response. But, it is important that these methods based on frequency-domain unstably change the accuracy according to the material parameter of S-N curve. This study will be background and guidance for the new frequency-domain fatigue analysis development in the future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.83-86
• /
• 2003

This paper is the research and development including the system design and the prototype system building of the wide-band digital autocorrelation spectrometer system for radio astronomy observation, which will be used as back-end signal processing unit of the Dual channel SIS receiver at Taeduk Radio Astronomy Observatory. So in this paper. we performed development of the high speed digitizing sampler, the circular memory buffer, and the correlator module for the 400MHz wide-band digital autocorrelator.

• 조명전기설비학회논문지
• /
• 제21권2호
• /
• pp.34-39
• /
• 2007

UWB(Ultra Wide Band) system for high speed and high accurate location has been studying actively. This paper presents the design and implementation of RF transceiver for DS-CDMA(Direct Sequence-Code Division Multiple Access) UWB device. Major components of RF transceiver such as Low Noise Amplifier(LNA) and Band Pass Filter(BPF) are designed and then fabricated to meet wideband characteristics. The RF transceiver was implemented by the use of the fabricated components and commercial devices after carrying out performance simulation. Through the performance evaluation of the UWB RF transceiver with W-CDMA signal, the approach of design, implementation and evaluation of RF transceiver which is available to DS-CDMA UWB system is verified.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.431-432
• /
• 2007

A general method for both reduced VCO gain ($K_{vco}$) and wide frequency band is to use the switched-capacitor bank LC VCO. However, $K_{vco}$ can fluctuate widely in the wide oscillation frequency range of the VCO. In this paper, a design of wide-band VCO with improved frequency-voltage gain performance is presented. Optimized multiple varacter switching technique is used for reducing its frequency-voltage gain variation.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1365-1368
• /
• 2014

A CPW-fed to CPS dipole antenna of triangular loop director by microstrip tapered balun is proposed for dual and wide band operations, in this paper. The proposed antenna is consisted of a CPW-fed to CPS transform, microstrip tapered balun element, CPS dipole driver and triangular loop director. A dual and wide bandwidth of the proposed dipole antenna is realized by introducing the triangular loop director and taper matching element. The operated frequency bandwidth is 1GHz (2.14~3.14 GHz) and 1.9 GHz (4.6~6.5 GHz) to return loss criterion of less than 10 dB. The measured return loss of the proposed antenna showed good results of the dual and wide band operating frequency and the radiation pattern. The proposed antenna is able to support WLAN wireless communications applications.

• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.35-43
• /
• 2016

A compact ultra-wide band antenna with a quadruple band-notched characteristic is proposed. The proposed antenna consists of a slotted trapezoid patch radiator, an inverted U-shaped band stop filter, a pair of C-shaped band stop filters, and a rectangular ground plane. To realize the quadruple notch-band characteristic, a U-shaped slot, a complementary split ring resonator, an inverted U-shaped band stop filter, and two C-shaped band stop filters are utilized in this antenna. The antenna satisfies the -10 dB reflection coefficient bandwidth requirement in the frequency band of 2.88-12.67 GHz, with a band-rejection characteristic in the WiMAX (3.43-3.85 GHz), WLAN (5.26-6.01 GHz), X-band satellite communication (7.05-7.68 GHz), and ITU 8 GHz (8.08-8.87 GHz) signal bands. In addition, the proposed antenna has a compact volume of $30mm{\times}33.5mm{\times}0.8mm$ while maintaining omnidirectional patterns in the H-plane. The experimental and simulated results of the proposed antenna are shown to be in good agreement.