• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1994년도 춘계학술발표회
• /
• pp.43-48
• /
• 1994

A wide band design method of an electromagnetic wave absorber using exponentially tapered ferrite which has very wide band frequency characteristics is proposed and discussed. The wide band electromagnetic wave absorber can be designed by the proposed equivalent material constants method for the regions varying spatially in the shape of ferrite. Furthemore the wide band ferrite electromagnetic wave absorbers with taper which have not only excellent reflectivity frequency characteristics but also the band width of 30MHz to 2150 or 2450MHz under the tolerance limits of -20dB reflectivity were designed.

• 한국항해학회지
• /
• 제18권2호
• /
• pp.151-158
• /
• 1994

A wide band design method of an electromagnetic wave absorber using exponentially tapered ferrite, which has very wide band frequency characteristics, is proposed and discussed. The wide band electroma-gnetic wave absorber can be designed by the proposed equivalent material constants method for the re-gions varying spatially in the shape of ferrite. Futhermore, the wide band ferrite electromagnetic wave absorber with taper, which have not only exce-llent reflectivity frequency characteristics but also the band width of 30MHz to 2150 or 2450MHz under the tolerance limits of -20dB reflectivity, were designed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권3호
• /
• pp.175-181
• /
• 2006

Wide band-gap semiconductor electron devices have made great progresses to produce very high power amplifiers for various wireless standards. The advantages of wide band-gap electronic devices and their progresses are summarized in this paper.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.793-799
• /
• 2018

An improved design of Ultra Wide Band(UWB) Bow-Tie antenna, which can control an enhanced wide stop-band, is presented. The mutually coupled slot-pair improves and controls the rejection band. The UWB antenna is composed of an electromagnetically coupled Bow-Tie patch and a parasitic ground patch, whose working frequency is extended to full UWB range in this work. By adding slot-pairs on the main patch and optimizing, they can give any requested wide rejection bands and sharp skirt characteristics, as is often required for UWB antennas and multi-band antennas. All the parameters are precisely calculated by an adequate optimization method. The Particle Swarm Optimization(PSO) technique is appropriately adopted. The proposed design and method is proved to give and control the sharp-skirt wide stop-band to UWB Bow-Tie antennas.

• Transactions on Electrical and Electronic Materials
• /
• 제18권3호
• /
• pp.125-128
• /
• 2017

This study is on how ohmic area etching affects the buffer breakdown voltage of AlGaN/GaN HEMT. The surface morphology of the ohmic metal can be improved by whole etching on the ohmic area. The buffer breakdown voltages of the samples with whole etching on the ohmic area were improved by the suppression of the metal spikes formed under the ohmic contact regions during high-temperature annealing. The samples with selective etching on the ohmic area were investigated for comparison. In addition, the buffer leakage currents were measured on the different radii of the wafer, and the uniformity of the buffer leakage currents on the wafer were investigated by PL mapping measurement.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.288-291
• /
• 2012

We designed an ultra-wide band-pass filter applicable to microwave reflectometry for KSTAR (Korea Superconducting Tokamak Advanced Research) and to microwave photonics. The proposed ultra-wide band-pass filter exhibits a metamaterial structure characterized by a wide band, low insertion loss, and high skirt selectivity. The proposed filter is applied to enhance the linearity of reflectometry at the output of a VCO (voltage controlled oscillator). The pass-band of the proposed filter is observed at 18~28 GHz, and the out-of-band rejection is below 20 dB. Further, we constructed an unwrapped negative phase of S(2, 1) to verify the characteristics of the metamaterial. The under- and upper-band at lower limits of the pass-band are left- and right-handed, respectively. The group delay of the filter is less than 0.5 ns.

• 전자공학회논문지 IE
• /
• 제46권1호
• /
• pp.1-6
• /
• 2009

본 논문에서는 광대역 주파수 합성기의 구현을 위하여 주파수 검출 범위와 락킹 시간을 개선한 디지털 PLL의 구조 및 설계에 대하여 기술한다. 제안된 구조에서는 광대역의 고속 주파수 비교기를 위하여 광역 디지털 로직 직교상관기를 사용하였고, 2 비트 업-다운 카운터 및 시그마-델타 변조기를 적용하여 디지털 제어 발진기의 주파수가 제어되도록 하였다. 따라서 양자화에 의한 잡음으로부터 추가되는 위상 잡음을 감소시킬 수 있으며, 최근의 휴대용 멀티미디어 통신 단말기 등에서 요구되는 고속의 락킹 및 광대역 지원, 그리고 저전력 현에 적합하다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.163-168
• /
• 1996

In this paper a new dynamic damper driven by DC linear electric motor, is proposed for suppressing wide-band vibration. First, the reason for the incapability of a conventional dynamic damper to suppress wide-band vibration is explained. Then, with its defects taken into consideration, the principle of wide-band vibration control is presented. Finally, experiments ar conducted verifying the control effect of the active dynamic damper for suppressing wide-band vibration.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1994년도 추계학술발표회
• /
• pp.59-68
• /
• 1994

A wide band design method of an double layerred electromagnetic wave absorber sintered ferrite which has a flat and an anti-grid shape layers is proposed and discussed. The wide band electomagnetic wave absorber can be designed by the equivalent material constants method for the each layer, As a result the wide band ferrite electonmagnetic wave absorber with the band width of 30MHz to 3670, 3680 or 3690MHz were designed under the tolerance limits of -20dB reflectivity.

• 한국전자파학회논문지
• /
• 제7권4호
• /
• pp.346-352
• /
• 1996

초광대역 주파수 특성을 가지며, 제2층에 십자형 슬롯을 가지는 2층형 전파흡수체의 광대역 설계법을 제안하였다 이와같은 광대역 전파흡수체는 등가재료정수법을 적용한 이론 모델을 이용하여 설계할 수 있다. 제안한 모델을 바탕으로 30MHz~3,170MHz의 주파수 범위에서 우수한 반사감쇠 특성을 가지는 초광대역 전파흡수체를 설계하였다.