• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.430-434
• /
• 2000

In this paper, a novel photonic bandgap(PBG) structure is proposed for increasing stropband of lowpass filter without the size increment of circuit for application in microstrip circuits. The proposed structure is connected in parallel two periodic structures which have different center frequency of the stopband. The wide stopband is achieved by two periodic structures of two different stopbands. We also show the performance improvement of microstrip patch antenna by etching of the proposed structure in ground plane.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.985-988
• /
• 2011

A novel application of a dual-transmission line is proposed to design a lowpass filter (LPF). The proposed structure uses only transmission line elements to produce an equiripple LPF response with sharp roll-off. Design equations are derived using a lossless transmission line model. Controlling the electrical lengths, three transmission-zeros are realized in the stopband to obtain a sharp roll-off rate and wide stopband bandwidth. A single unit microstrip LPF with a 3-dB cut-off frequency at 1.0 GHz having a roll-off of 135 dB/GHz along with a stopband bandwidth of 69.5% is designed for validation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.355-360
• /
• 2012

In this paper, an stepped-impedance low pass filter(SI-LPF) of triangular-patch type is proposed. A SI-LPF designed according to the standard SI-LPF design procedure is folded as a right angled triangle. The figure of merits of this structure are the adjustabilities of the cut off frequency, the stopband and the attenuation pole frequency of the proposed LPF by varying the resultant slots after folding the SI-LPF compactly for miniaturization. The size of the fabricated LPF is $13.75mm{\times}6.875mm$, which is 24.4 % reduced one compared to that of the conventional SI-LPF. The measured results of the LPF show return loss of less than -10 dB at passband, insertion loss of less than -10 dB at stopband and wide stopband from 3.5 GHz to 10 GHz (about $3f_c$).

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.352-356
• /
• 2003

본 논문에서는 매우 넓은 저지대역과 우수한 cutoff 특성을 갖는 저역통과 여파기를 제안하였다. 접지면 슬롯과 급전면 개방 스터브의 특성을 결합한 기존의 광대역 여파기에서 전송선의 길이를 ${\lambda}_g/4$로 변형함으로써 기존의 여파기보다 더 작은 크기로 넓은 저지대역과 급격한 cutoff 특성을 얻을 수 있었다. 또한 설계한 단위 여파기를 특정 간격로 배열하여 더 깊은 저지대역과 향상된 cutoff 특성을 얻을 수 있었다.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.331-334
• /
• 2006

In this paper, we designed and fabricated the lowpass filter with the wide stopband characteristics using microp- strip line. Adding the $\lambda_g/4$ open stub at the input and output ports, we developed the L-C ladder type lowpass filter using the open stub which has wide stopband characteristics. In order to reduce the entire size qf this filter, the high impedance microstrip lines were made with the meander structure. The lowpass filter was fabricated with the cutoff frequency 2.3 GHz and its measured frequency responses agree well with the simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.438-446
• /
• 2005

In this paper, the modified generalized Chebyshev rational function is presented. The new element values of prototype low pass filter are obtained by network synthesis using this rational function. This proposed filter has an equal ripple passband as same as conventional generalized Chebyshev filter, but unlike conventional filter which has only one attenuation pole at finite frequency, the proposed filter has two different from each other attenuation pole in stopband. If the harmonic frequency is set to the second attenuation pole frequency, this harmonic is suppressed efficiently. Furthermore, since the location of the second attenuation pole can be arbitrary adjusted. our filters are very available for the realization of wide stopband, particularly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.852-857
• /
• 2004

In this research, we suggested a new PBG cell with wide stopband. In order to improve the characteristics of the insertion loss, return loss, and ripple, we used two overlapped cells. One is small cell which is made in inside and the other is large cell which is made in outside. The inner cell stops the high band and the outer cell stops the low band. As a result, the new PBG cell had a wide stop band. Insertion loss was about 40dB in stopband and the ripple, and the return loss was improved. Also, the passband is broaden by employing new PBG cells.

• ETRI Journal
• /
• v.41 no.1
• /
• pp.117-123
• /
• 2019

This paper presents a tri-wideband bandpass filter (TWB-BPF) with compact size, high band-to-band isolation, and multiple transmission zeros (TZs). The proposed TWB-BPF is based on a multiple-mode resonator (MMR), which is interpreted by the method of the even- and odd-mode analysis technique. The MMR can excite 11 resonant modes, where the first two modes comprise the first passband, the next four modes form the second passband, and the last five modes are used to generate the third passband. In addition, 10 TZs are yielded to obtain high band-to-band isolation and wide stopband suppression characteristics up to $14.95f_{c1}$ ($f_{c1}$ is the center frequency of the first passband). To verify the proposed filter, a TWB-BPF with 3-dB fractional bandwidths (FBWs) of 37.4%, 43.5%, and 40.4% is designed, fabricated, and measured.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.538-541
• /
• 2013

A compact microstrip lowpass filter (LPF) with an elliptic function response is proposed. A high equivalent capacitance and inductance between the structures of the resonator result in the sharp transition band of 0.04 GHz from 4 GHz to 4.04 GHz with an attenuation level of -3 dB and -20 dB, respectively. To improve the LPF rejection band, multiple open stubs are connected to the proposed resonator. A filter with a 3-dB cut-off frequency at 4 GHz is designed, fabricated, and measured, and agreement between the measured and simulated results is achieved. The results show that a stopband bandwidth of 131% with a suppression level better than -20 dB is obtained while achieving a compact size with a wide stopband.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1071-1077
• /
• 2002

In this paper, we have studied the dependence of insertion loss of the pressed microstrip PBG ring consisting of coupled two microstrip lines. When the distance decreases, two or three attenuation poles are created by the coupling between the lines. Thus the pressed PBG ring exhibits a wide stop band and sharp cutoff characteristics.