• 세라미스트
• /
• 제22권1호
• /
• pp.27-35
• /
• 2019

Research on ultraviolet (UV) light detection has attracted considerable attention from scientific researchers in related fields. It can be said that it is a very important time to accurately monitor the UV irradiation amount according to the wavelength region in real time. The oxide is very diverse in its kind and has the advantage of being able to efficiently control the band gap through band gap engineering. In addition, it is very stable in response to heat and atmospheric oxygen when UV is absorbed. Also, there is a known method that can effectively manufacture oxide nanoparticles and nanorods through various synthesis methods, and researches for improving the sensitivity of UV sensors have been carried out using this method. In this paper, we introduce the materials that can be used as UV sensors among various wide band oxide materials, and review the results of researches of various UV sensors using nano materials.

• Journal of Communications and Networks
• /
• 제14권6호
• /
• pp.710-718
• /
• 2012

The implementation of a common control channel is one of the most challenging issues in cognitive radio networks, since a fully reliable control channel cannot be created without reserving bandwidth specifically for this purpose. In this paper, we investigate a promising solution that exploits the ultra wide band (UWB) technology to let cognitive radio nodes discover each other and exchange control information for establishing a communication link. The contribution of this paper is threefold: (i) We define the communication protocol needed to let cognitive radio nodes discover each other and exchange control information for link set up, (ii) we overcome the gap in coverage, which typically exists between UWB and long-medium range technologies, by using multi-hop communication, (iii) we evaluate the performance of our approach by adopting an accurate channel model and show its benefits with respect to an in-band signaling solution.

• 한국정보통신학회논문지
• /
• 제13권7호
• /
• pp.1255-1260
• /
• 2009

마이크로스트립 인터디지털(interdigtal) 여파기는 공진기의 폭, 길이, 공진기 사이의 간격과 탭의 위치로 설계하는데, 설계파라미터의 수를 줄이는 것이 구현 측면에서 유리하다. 본 논문에서는 마이크로스트립 인터디지털 여파기의 설계파라미터 중에서 공진기의 폭을 고정시킨 것과 서로 다른 폭을 갖는 두 종류의 여파기를 국내 UWB(Ultra Wide-Band) 주파수 대역에서 설계 및 구현하였다. 여파기의 성능 측정 결과 공진기의 폭을 고정한 low-band high 여파기의 삽입손실은 1.49dB, -10dB 대역폭은 750MHz였고, 4.8GHz에서 -35.7dB의 감쇄특성을 가졌으며, S11은 -13dB 이하로 측정되었다. 공진기의 폭이 서로 다른 low-band 여파기는 삽입손실 1.6dB, -10dB 대역폭은1.63GHz로 측정되었고, S11은 -8dB 이하로 측정되었다.

• 전기화학회지
• /
• 제14권3호
• /
• pp.145-151
• /
• 2011

ZnSe는 가시광선 영역에서 넓은 밴드갭을 가지고 있는 II-VI족 화합물 반도체 소자로서 레이저 다이오드, 디스플레이 그리고 태양전지와 같은 다양한 응용분야에 적용되고 있다. 본 연구에서는 전기화학적 전착방법을 이용하여 ITO 전극상에 ZnSe 박막을 합성하여, XRD와 SEM으로 ZnSe 결정의 합성과 zinc blende 구조의 형태를 관측하였고, UV 분광기를 활용하여 밴드갭을 측정한 결과 2.76 eV이었다. 또한, 분자동역학에서 활용되는 밀도범함수 이론 (DFT, Density Functional Theory)을 도입하여 ZnSe 결정에 대한 밴드 구조의 해석을 수행하였다. Zinc blende구조를 갖는 ZnSe 결정에 대하여 LDA (Local Density Approximation), PBE (Perdew Burke Ernzerhof), 그리고 B3LYP (Becke, 3-parameter, Lee-Yang-Parr) 범함수를 이용하여 밴드구조와 상태밀도 (Density of State)를 모사하였다. 각각의 경우에 대해 에너지 밴드갭을 구한 결과, B3LYP 범함수로 해석한 경우에 실험치와 근사치인 2.65 eV의 밴드갭을 보여주었다.

• 한국재료학회지
• /
• 제26권6호
• /
• pp.347-352
• /
• 2016

ZnO with wurtzite structure has a wide band gap of 3.37 eV. Because ZnO has a direct band gap and a large exciton binding energy, it has higher optical efficiency and thermal stability than the GaN material of blue light emitting devices. To fabricate ZnO devices with optical and thermal advantages, n-type and p-type doping are needed. Many research groups have devoted themselves to fabricating stable p-type ZnO. In this study, $As^+$ ion was implanted using an ion implanter to fabricate p-type ZnO. After the ion implant, rapid thermal annealing (RTA) was conducted to activate the arsenic dopants. First, the structural and optical properties of the ZnO thin films were investigated for as-grown, as-implanted, and annealed ZnO using FE-SEM, XRD, and PL, respectively. Then, the structural, optical, and electrical properties of the ZnO thin films, depending on the As ion dose variation and the RTA temperatures, were analyzed using the same methods. In our experiment, p-type ZnO thin films with a hole concentration of $1.263{\times}10^{18}cm^{-3}$ were obtained when the dose of $5{\times}10^{14}$ As $ions/cm^2$ was implanted and the RTA was conducted at $850^{\circ}C$ for 1 min.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권1호
• /
• pp.44-51
• /
• 2000

In this paper, using a wide-band AE sensor with the frequency range from 100[kHz] to 1.5[kHz], the frequency spectra of AE signals generated from the corona discharges of the needle-plane gap and from the partial discharges of an epoxy void were analyzed to determine the proper ultrasonic sensor with optimum frequency range according to the patterns of corona discharges. We also examined the propagation characteristics of AE signals in oil and the relationship between the magnitude of corona discharge and the magnitude of AE signals in peak-to-peak value under the application of 60[Hz] ac high-voltage. From these results, the main frequency spectra of AE signals emitted from the corona discharges of the needle-plane gap were about 130[kHz] by the fast fourier transform, but the main frequency spectra appeared to be 230[kHz] in the partial discharges of an epoxy void. The magnitude of AE signals was proportional to the magnitude of corona discharge and discharge current pulse with increasing the applied voltages.

• 전자통신동향분석
• /
• 제29권6호
• /
• pp.53-62
• /
• 2014

본고는 최근 화두가 되고 있는 에너지 절감을 위해 고효율, 친환경의 WBG(Wide Band-Gap) 화합물반도체인 SiC(Silicon Carbide), GaN(Gallium Nitride) 전력반도체 소자 및 전력변환 모듈의 기술동향과 ETRI에서 연구개발 진행 중인 GaN 전력반도체 관련 기술에 대해 기술한다. WBG 전력반도체는 기존의 실리콘 전력반도체와 비교하여 열 특성 향상, 고속 스위칭, 고전압/고전류 특성 및 스위칭 손실 최소화 등이 가능하고 이에 따른 시스템의 소형화 및 전력효율 향상 효과를 얻을 수 있다. 특히, GaN 전력반도체 소자는 시장이 가장 넓게 형성되어 있는 900V 이하에 적용이 가능하며, 앞으로 시장이 커질 것으로 예상되는 HEV(Hybrid Electric Vehicle)/EV(Electric Vehicle)의 친환경 자동차에도 활용될 것으로 기대되고 있다. 본고는 최근의 일본과 미국에서의 WBG 전력반도체에 대한 관심 및 투자 방향과 GaN 전력반도체 소자에 대한 해외 기업의 업계동향에 대해서도 함께 살펴본다. 이러한 WBG 전력반도체에 대한 해외 선진업체의 산업동향과 더불어 ETRI에서 연구개발 중인 GaN 전력반도체 기술현황에 대해 전력소자 설계 및 제조공정, 패키징, 전력모듈 설계 제작 기술을 포함하여 기술한다.

• 전력전자학회논문지
• /
• 제19권3호
• /
• pp.283-289
• /
• 2014

This paper carries out a series of analysis of power system using Gallium Nitride (GaN) FET which has wide band gap (WBG) characteristics comparing to conventional Si MOSFET-used power system. At first, for comparison of each semiconductor device, the switching-transient parameter is quantitatively extracted from released information of GaN FET. And GaN FET model which reflect this dynamic property is configured. By using this model, the performance of GaN FET is analyzed comparing to Si MOSFET. Also, in order to enable a representative assessment on the power system level, Si MOSFET and GaN FET are applied to the most common structure of power system, full-bridge, and each power systems are compared based on various criteria, such as performance, efficiency and power density. The entire process is verified with the aid of mathematical analysis and simulation.

• 마이크로전자및패키징학회지
• /
• 제26권3호
• /
• pp.15-22
• /
• 2019

In these days, importance of the power electronic devices and modules keeps increasing due to electric vehicles and energy saving requirements. However, current silicon-based power devices showed several limitations. Therefore, wide band gap (WBG) semiconductors such as SiC, GaN, and $Ga_2O_3$ have been developed to replace the silicon power devices. WBG devices show superior performances in terms of device operation in harsh environments such as higher temperatures, voltages and switching speed than silicon-based technology. In power devices, the reliability of the devices and module package is the critically important to guarantee the normal operation and lifetime of the devices. In this paper, we reviewed the recent trends of the power devices based on WBG semiconductors as well as expected future technology. We also presented an overview of the recent package module and fabrication technologies such as direct bonded copper and active metal brazing technology. In addition, the recent heat management technologies of the power modules, which should be improved due to the increased power density in high temperature environments, are described.

• 한국수소및신에너지학회논문집
• /
• 제24권2호
• /
• pp.107-112
• /
• 2013

The ZnO is able to produce hydrogen from water however it can only absorb ultraviolet region due to its 3.37eV of wide band gap. Therefore efficiency of solar hydrogen production is low. In this work we report investigation results of improved visible light photo-catalytic properties of CdSe quantum dots(QDs) sensitized ZnO nanorod heterostructures. Hydrothermally vertically grown ZnO nanorod arrays on FTO glass were sensitized with CdSe by using SILAR(successive ionic layer adsorption and reaction) method. Morphology of grown ZnO and CdSe sensitized ZnO nanorods had been investigated by FE-SEM that shows length of $2.0{\mu}m$, diameter of 120~150nm nanorod respectively. Photocatalytic measurements revealed that heterostructured samples show improved photocurrent density under the visible light illumination. Improved visible light performance of the heterostructures is resulting from narrow band gap of the CdSe and its favorable conduction band positions relative to potentials of ZnO band and water redox reaction.