• Journal of Convergence Society for SMB
• /
• v.1 no.1
• /
• pp.67-73
• /
• 2011

Handover in high speed mobile communication service, in particulary mobile WiMAX is supported efficiency mobility to 120km/h speed. But, in order to accommodate number of user increment in a cell, wireless network is increment to microcell and picocell by allocate bandwidth and by decrease cell size. handover is occurrent and increment connection failure ratio In this result. IEEE 802.16 standard is support seamless connection through handover optimization scheme. But because authentication process is abbreviate, network weakness is exposure. In this paper, we propose handover scheme for support realtime service as VoIP, Picure communication, Streaming Data Service in order to support partially encryption method. In experiment, proposed scheme is proof which process time is increment 20% more than previous scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.162-172
• /
• 2011

In this paper, a design and fabrication of 4 W power amplifier for the WiMAX frequency band(2.3~2.7 GHz) are presented. The adopted active device is a commercially available GaN HEMT chip of Triquint Company, which is recently released. The optimum input and output impedances are extracted for power amplifier design using a specially self-designed tuning jig. Using the adopted impedances value, class-F power amplifier was designed based on EM simulation. For integration and matching in the small package module, spiral inductors and interdigital capacitors are used. The fabricated power amplifier with $4.4{\times}4.4\;mm^2$ shows the efficiency above 50 % and harmonic suppression above 40 dBc for second(2nd) and third(3rd) harmonic at the output power of 36 dBm.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.57-64
• /
• 2009

In order to efficiently provide IP based Wireless Broadband services in Mobile WiMAX, schemes for more efficiently utilizing a limited bandwidth in radio links are needed. Robust Header Compression (ROHC), a standard header compression scheme proposed by IETF, Bi-directional Optimistic (O) mode provides higher compression efficiency and robustness compared with Payload Header Suppression (PHS) which is an optional header compression scheme for mobile WiMAX [1, 2]. However, if consecutive packet losses occur because of a Shadow Region of Mobile WiMAX or bit errors, header decompression failure rate of the ROHC O mode increases due to inconsistency of the compression information between the Compressor and the Decompressor. Therefore, a complementary mechanism is needed. In this paper, we propose an approach for the dynamic adjustment of an optimistic parameter, which has an effect on both the compression efficiency and the robustness, for improving the performance of ROHC O mode. We also analyze the performance of the proposed approach using an OPNET simulator.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.67-72
• /
• 2011

8-layer printed circuit board is designed and implemented for triple band(2.3/2.5/3.5GHz) m-WiMAX system. In order to maintain excellent RF performance, low dielectric constant material is used for implementation of the printed circuit board. Also, embedded printed circuit board which embed passive devices is manufactured to reduce total system area. As a result, total system area is cut off by 9%. Triple band m-WiMAX system is produced using embedded printed circuit board. Furthermore, internet connecting test is performed and proved successful running of the system. The developed embedded printed circuit board will provide a effective solution for system area reduction and low loss signal RF communication system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.537-543
• /
• 2007

In this paper, we propose a new stopping criterion for the turbo processing (Turbo-BLAST) of MIMO-OFDM system. To reduce the high computational complexity of turbo-BLAST, it is desirable to lessen the outer-loop iteration number. In a system such as IEEE 802.16e Mobile WiMax, no CRC bits are available except the last encoding packet of a transmitted burst, so early stopping criteria without the help of CRC bits are needed. The proposed criterion counts the sign differences between received parity bits and the re-encoded parity bits from received information bits. With the tail-biting code which is accepted for IEEE 802.16e, a method that the re-encoder operates at half complexity is also proposed. Computer simulations show that the proposed stopping criterion approaches the performance of GENIE aided criterion with less average number of iterations than the other early stopping criteria.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.257-266
• /
• 2009

Now a days, as increased the use of mobile units like a laptop computer and PDA, the demand for high speed internet service is increasing. On the other hand, PKMv2 which is provided from IEEE 802.16e cannot support fully on the security of high speed internet service. This paper proposes light-weight mutual authentication protocol which solved security problem of PKMv2 related to integrity of mobile node for transmission of safe high speed data of mobile node operating in mobile WiMAX environment. Proposed mutual authentication protocol increases the efficiency as the user in network can move in network safely without additional procedure of authentication between subscriber and base station after user's initial authentication. Also, the proposed mutual authentication protocol is safe from the security attack (the man-in-the-middle attack and reply attack) between subscriber and base station by generating a key adopt to PRF() function using random number and secret value in order to secure certification.

• Journal of Advanced Navigation Technology
• /
• v.26 no.1
• /
• pp.29-34
• /
• 2022

In this paper, the design of a triple dipole quasi-yagi antenna operating in the 2.45 GHz and 5 GHz wireless LAN frequency bands and the 3.5 GHz WiMAX frequency band was studied. The proposed quasi-Yagi antenna consists of three dipoles connected in series with a V-shaped ground plane. The longest half-bow-tie-shaped dipole resonates in the 2.45 GHz band, whereas the medium-length dipole resonates at 3.5 GHz. The shortest dipole resonates in the 5 GHz band. By adjusting the length and width of the dipoles and the spacings between the dipoles, a triple-band directional antenna operating in the 2.45 GHz, 3.5 GHz, and 5 GHz bands are designed, and fabricated on an FR4 substrate with a size of 45 mm × 55 mm. It was confirmed that the fabricated antenna operates in the designed triple bands of 2.32-2.57 GHz, 3.26-3.69 GHz, and 4.50-6.56 GHz for a voltage standing wave ratio less than 2. Gain is maintained above 3 dBi in the three bands.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.1
• /
• pp.107-115
• /
• 2009

The cryptological key which is used in WiMAX environment is used at regular intervals by mobile nodes (laptop computer, PDA, cell-phone) which is in the range of base station coverage. But it is very weak at local attack like man-in-the-middle when the mobile node is off the range of base station or enters into the range to communicate with base station because the communication section is activated wirelessly. This paper proposes a distribution key building protocol which can reuse security key used by nodes to reduce cryptological security attack danger and communication overhead which occurs when mobile node tries to communicate with base station. The proposed distribution key establishing protocol can reduce overhead which occurs between base station and mobile node through key reusing which occurs during the communication process and also, makes security better than IEEE 802.16 standard by creating shared key which is required for inter-certification through the random number which node itself creates.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.15-22
• /
• 2018

In this paper, a microstrip-fed triple-band monopole antenna for WLAN/WiMAX applications was proposed. The proposed antenna is consist of two arc-shaped and one strip line structure, then get the three current path and then designed in order to get triple resonant characteristics. We carried out simulation about parameters. Taking account of coupling effect, Adjusted the length of the two arc-shaped and one strip line, we get the optimized parameters. The proposed antenna is fabricated on an FR-4 substrate, the dielectric constant is 4.4, and total size is $23.5mm(W1){\times}32.0mm(L1){\times}1.0mm(t)$, and its proposed antenna size is $21.0mm(W6){\times}31.0mm(L7)$. From the measured results, return loss of the proposed antenna satisfied return loss 927 MHz (1.844~2.771 GHz), 926 MHz (3.33~4.256 GHz), and 1,415 MHz (5.13~6.545 GHz). And measured results of gain and radiation patterns displayed for operating bands.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.90-96
• /
• 2020

As various communication services have emerged due to the development of mobile communication technology, there is a need for a wideband antenna supporting multiple communication services with one antenna. In this paper, we propose a planar slot wideband antenna that can support all the communication services of 3.1~4.99GHz, the low frequency band of 5G, in addition to the existing communication services such as WiFi, LTE 2300/2500, and WiMAX. Through the simulation, the optimized antenna design parameters were obtained, and the antenna was fabricated to implement an antenna with a frequency bandwidth of 1.96~6.01GHz (S11 <-10dB) and presented the radiation pattern and gain of the antenna. The proposed antenna is a multi-band antenna that can provide all the services of LTE, Wifi, WiMAX, and 5G low frequency bands. It can be used as a repeater antenna in radio shadow area such as buildings, dense areas, and ships.