• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.21-28
• /
• 2021

In this paper, a novel data transferring method is introduced that can transmit sensor data without using data bandwidth or an extra-processing cycle in a delay insensitive network. The proposed method uses human devices as Mules, does not disturb the device owner for permission, and saves energy while transferring sensor data to the collection hub in a wireless sensor network. This paper uses IP addressing technique as the data transferring mechanism by embedding the sensor data with the IP address of a Mule. The collection hub uses the ARP sequence method to extract the embedded data from the IP address. The proposed method follows WiFi standard in its every step and ends when data collection is over. Every step of the proposed method is discussed in detail with the help of figures in the paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.436-438
• /
• 2015

In this paper, a P2P Standard Group Formation (P2P-SGF) method in Wi-Fi Direct is presented to provide direct communication services between Internet-of-Things (IoT) gateways. Generally, network traffic congestion and speed reduction problems are caused when transmitting mass data as well as measured data from many sensors between IoT gateways via an Access Point (AP). For solving these problems, it is required to implement Wi-Fi Direct efficiently transmitting mass data between IoT gateways without passing through the AP. The implemented P2P-SGF method basically performs Discovery, GO (Group Owner) Negotiation, WPS (Wi-Fi Protected Setup) Provisioning, and Address Configuration. Especially, it supports the DLNA (Digital Living Network Alliance) service function for sharing mass data between IoT gateways. Some experimental results verify that it can successfully share large video files.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.1
• /
• pp.7-14
• /
• 2014

The rapid increase of mobile devices such as smart phone and smart pad have raised the needs for seamless multimedia services during moving at anytime and anywhere. Current 4G mobile devices are equipped with both 4G (LTE) and WLAN (WiFi) interfaces, and mobile services operators provide wireless Internet services using 4G network with a wider coverage and WiFi zone. Generally users prefer to use the Internet services through WLAN rather than LTE in the coverage of WLAN. However, since WLAN has a long L2 handover latency, it is difficult to support seamless services during a handover. In this paper, we proposed an efficient handover scheme based on flow mobility for WLANs to support a seamless service during handovers by using the overlaid 4G network with a wider coverage. Also, we showed the outperformance of the proposed scheme on a testbed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.1-16
• /
• 2013

Smartphones and tablets including phone, calendar are the necessities of modern man. They are one of the MN(Mobile Node), each with wireless network capabilities. Necessities of modern human MNs are almost included cellular module available in LTE/3G and Wi-Fi module for high-speed Internet. Until now, MN mobility management is handled, but using network-based mobility management in this paper. Then, carriers can manage and maintain the network for low-cost. In addition, it was considered that use a lot of modern people with Wi-Fi and LTE/3G, and using Cross-Layer-Based handoff.

• Journal of KIISE
• /
• v.42 no.2
• /
• pp.272-279
• /
• 2015

Concurrent with the more widespread usage of smart devices, mobile users' desires are becoming much more complex. Most IT experts insist that smart devices should have additional functions to satisfy these requirements. In particular, research has concentrated on LBS (Locationbased Service), because it is considered one of the most common mobile service types. Generally, Wi-Fi has a critical limitation for use for LBS services, because it requires new network connection points whenever its location (Network Zone) changes. Unfortunately, GPS also has a systematic problem in providing LBS service in the indoor environment, because of its inaccuracy in processing data. So, to redress these limitations, iBeacon technology has been designed, and is currently used for LBS service instead of Wi-Fi or GPS. By using iBeacon, which is based on Bluetooth 4.0 LE technology, we propose a M-SAS (Mobile-Subway-Alarm-Service System) that could accurately and timely provide its users with various mLBS (micro LBS) services, such as current user location, and subway arrival time.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.8
• /
• pp.1138-1143
• /
• 2013

In this paper, we propose a smartphone application based on a wireless fidelity(WiFi) in order to control the charging of electric vehicle(EV) and monitor the charging status together with the vehicle history information. The driver obtains much information on vehicle status through a smartphone application which communicates with the electric vehicle supply equipment(EVSE) management server while the EV also communicates with the EVSE for the authentification through controller area network(CAN). We also implement the simulator for the EV charging control system to verify the functions of the proposed application where the simulator consists of an EV model, an EVSE, and a smartphone. It is shown by the simulator that the proposed smartphone application allows the driver to control and to monitor the charging process of an EV conveniently and, moreover, it can provide the driver with vehicle information stored in the EVSE management server.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.215-224
• /
• 2013

With the rising popularity of smart-phones, the supply of Internet protocol television is largely increased and it causes the wireless communication network load to be increased. To overcome such an overloading problem, 3GPP is now working on the standardization of MBMS since LTE Release 6 specification. MBMS has good performance in bandwidth efficiency by sharing the same bandwidth with the mulitple MBMS users having the same content. According to the proposed algorithm, in heterogeneous networks having a dispersed Single-cell MBMS where 3GPP network and Wi-Fi network are mixed, if the number of MBMS users, who are belonging to cells supporting a dispersed Single-cell MBMS, is more than a specified threshold, the MBMS priority policy is operated. Otherwise, the Wi-Fi priority policy is executed. As the simulation results show both the increase of total available bandwidth ratio and the decrease of network usage cost, it is confirmed that the proposed scheme allows the network efficiency to be maximized.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.35-46
• /
• 2013

As a rapid increase of mobile network usage, many studies on solution for network traffic's demand problem have been done. Especially network environment measurement area provides basis for solving network traffic's demand problem by finding causes of problems through accurate network analysis. However, as increase of demand for smartphone, we should consider effects of mobile platform's property measuring mobile network. In this paper, we design a network traffic measurement system considering mobile platform. Through the information from packets, this system calculates packet transmission delay and throughput. We minimize computation cost required for a mobile device that is a client in this system. When fully using network resources, we found that Wi-Fi has shorter transmission delay, higher maximum throughput and lower loss rate than 3G, Android has shorter transmission delay and higher maximum throughput than iOS, and UDP has longer transmission delay and higher maximum throughput through this system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1554-1557
• /
• 2020

Looking at the direction of the recent amendments of 802.11 family, there are two major trends. One is to enable the wireless transceivers to support the extremely high-speed wireless transmissions, which has been the mainstream so far. Another big trend is providing a high-performance wireless application platform that meets the demands of the market. This paper summarizes the brand-new IEEE 802.11 amendments from 11ax to 11bf under development by analyzing the innovative features and use cases on them. We provide the vision and direction for the research on the revolutionary data-hungry Wi-Fi 6 and the IEEE 802.11be, alias Wi-Fi 7.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.975-976
• /
• 2016

Beacon 기술은 배터리 소모가 적고 간편하게 장치와의 거리를 측정할 수 있어 여러 분야에 사용되고 있지만 장애물의 간섭에 약하다는 문제점이 있다. 따라서 본 논문에서는 이러한 문제를 개선하고자 간섭에 강한 WiFi 환경과 오픈소스 Frameware인 OpenWrt를 이용해 Raspberry pi를 AP화 시켜 Beacon 장치를 탐지하여 수신한 데이터를 사설 네트워크 내 장치들에게 안정적으로 전달할 수 있는 장치를 제안한다.