• KSBB Journal
• /
• 제9권1호
• /
• pp.72-84
• /
• 1994

치즈의 숙성 전과정을 잘 설명하여 줄 수 있는 수학식을 만들었다. X(0)와 $e_2$(0) 및 $k_1$값들을 증가시킴으로써 숙성과정을 촉진시킬 수 있었고 낮은 $k_2$값과 높은 $a_2$값을 가지는 신 균주의 탐색도 필요도하다는 것을 알았다. 그러나, 치즈 숙성과정 중 나쁜 치즈맛의 생산을 피하기 위하여서는 낮은 단백질 분해요소 활동도를 갖는 균주가 절대적으로 필요하다. 따라서 이 제안된 수학적 모델식은 치즈덩어리 내에서 일어나는 효소반응들을 잘 묘사하고 있으며, 궁극적으로는 값싸고 질 좋은 치즈를 생산하는데 유용할 것이다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제3권3호
• /
• pp.266-284
• /
• 2009

The challenges of rapidly growing numbers of mobile nodes in IPv6-based networks are being faced by mobile computing researchers worldwide. Recently, IETF has standardized Mobile IPv6 and Fast Handover for Mobile IPv6(FMIPv6) for supporting IPv6 mobility. Even though existing literatures have asserted that FMIPv6 generally improves MIPv6 in terms of handover speed, they did not carefully consider the details of the whole handover procedures. Therefore, in conventional protocols, the handover process reveals numerous problems manifested by a time-consuming network layer based movement detection and latency in configuring a new care of address with confirmation. In this article, we study the impact of the address configuration and confirmation procedure on the IP handover latency. To mitigate such effects, we propose a new scheme which can reduce the latency taken by the movement detection, address configuration and confirmation from the whole handover latency. Furthermore, a mathematical analysis is provided to show the benefits of our scheme. In the analysis, various parameters are used to compare our scheme with the current procedures, while our approach is focused on the reduction of handover latency. Finally, we demonstrate total handover scenarios for the proposed techniques and discussed the major factors which contribute to the handover latency.

• 한국초등과학교육학회지:초등과학교육
• /
• 제22권1호
• /
• pp.37-50
• /
• 2003

The purpose of this study was to develop the quality of the textbook and to find out reasonable selection and structure by examining and analyzing the cognition of teacher and students on the structure and contents of elementary science textbook in the 7th curriculum. The findings of this study were as follows: First, as a result of the students’ cognition, their interest level of the learning contents was high and the degree of the difficulty of the learning contents was low on the whole. Second, as a result of the teachers’ cognition of contents of the textbook, teachers who taught third graders understood that the third graders have relatively much contents to be studied and the level of the contents of the textbook was high. On the other hand, fourth graders’ teachers recognized that contents to be studied and the level of the contents were appropriate. And they understood that there were much work to be studied in the units which were difficult and there were difference between contents to be studied and the degree of the difficulty in some units such as life or the earth fold. Third, as a result of the teachers' cognition of structure of the textbook. teachers were very affirmative to reduce school hours. They understood that current numbers and scale of the unit were appropriate. Teachers were satisfied with the structure of elementary science textbook in the 7th curriculum on the whole.

• 한국축산시설환경학회지
• /
• 제7권2호
• /
• pp.63-76
• /
• 2001

A survey was conducted for dairy farmer to manage efficiently of a milking machine and equipment. Labor hours, operation costs, and milking cares for each dairy farmer to estimate the expected numbers of machine and equipment on the basis of the desired dairy farm scale. Based on the results of this research the following conclusions were made: Those who possessed a herringborn system and a tandem parlour system were relatively small portion 2% and 25% respectively of the whole dairy farmer. To improve dairy farmer\`s life, or to reduce his hard labor hours. it was necessary for most of dairy farmers to possess a herringborn system and a tandem parlour system. However, it was difficult for most of farmers to purchase a herringborn system and a tadem parlour system, because these system were very expensive. Only 20% farmers of the whole farmers repaired their milking system, which needed to be repaired quickly enough so that it might was used everyday. Among the parts of milking system, pulsator was found to have the highest breakdown ratio 59%, and vacuum pump was the breakdown ratio 27%. It took more than 2 hours to be milked twice a cow per one day. It means that milking spend so much time. Therefore, the auto milking system should be supplied to decrease hard labor hour.

• 천문학논총
• /
• 제32권1호
• /
• pp.11-15
• /
• 2017

We present the AKARI far-infrared (FIR) all-sky maps and describe its characteristics, calibration accuracy and scientific capabilities. The AKARI FIR survey has covered 97% of the whole sky in four photometric bands, which cover continuously 50-180 micron with band central wavelengths of 65, 90, 140, and 160 microns. The data have been publicly released in 2014 (Doi et al., 2015) with improved data quality that have been achieved since the last internal data release (Doi et al., 2012). The accuracy of the absolute intensity is ${\leq}10%$ for the brighter regions. Quantitative analysis of the relative intensity accuracy and its dependence upon spatial scan numbers has been carried out. The data for the first time reveal the whole sky distribution of interstellar matter with arcminute-scale spatial resolutions at the peak of dust continuum emission, enabling us to investigate large-scale distribution of interstellar medium in great detail. The filamentary structure covering the whole sky is well traced by the all-sky maps. We describe advantages of the AKARI FIR all-sky maps for the study of interstellar matter comparing to other observational data.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.5661-5668
• /
• 2012

물 부족 시대에 양변기 절수는 물을 절약하는데 가장 효과적인 방법 중 하나이다. 본 연구에서는 고절수형 양변기 개발을 위한 이상유동 해석을 위해 VOF 기법을 이용하였다. VOF를 이용한 전체 모델의 해석은 많은 시간이 요구되므로 전체모델의 일부분만 고려하는 부분모델도 해석시간 단축을 위해 사용하였다. 유량배분 해석을 위해 4개의 서로 다른 림 모델을 고려하였는데 림 홀의 위치나 개수보다는 림 홀의 크기가 유량배분을 효과적으로 달성하기 위한 인자임이 본 연구를 통해 밝혀졌다. 또한, 전체모델 해석을 통해 사이펀 현상에 따른 이상유동의 속도 및 압력도 분석하였다. 따라서 본 연구는 고절수형 양변기 모델 개발을 위한 다양한 기초 데이터를 제공한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권5호
• /
• pp.704-711
• /
• 2020

Objective: Muscle fiber types, numbers and area are crucial aspects associated with meat production and quality. However, there are few studies of pig muscle fibre traits in terms of the detection power, false discovery rate and confidence interval precision of whole-genome quantitative trait loci (QTL). We had previously performed genome scanning for muscle fibre traits using 183 microsatellites and detected 8 significant QTLs in a White Duroc×Erhualian F₂ population. The confidence intervals of these QTLs ranged between 11 and 127 centimorgan (cM), which contained hundreds of genes and hampered the identification of QTLs. A whole-genome sequence imputation of the population was used for fine mapping in this study. Methods: A whole-genome sequences association study was performed in the F₂ population. Genotyping was performed for 1,020 individuals (19 F₀, 68 F₁, and 933 F₂). The whole-genome variants were imputed and 21,624,800 single nucleotide polymorphisms (SNPs) were identified and examined for associations to 11 longissimus dorsi muscle fiber traits. Results: A total of 3,201 significant SNPs comprising 7 novel QTLs showing associations with the relative area of fiber type I (I_RA), the fiber number per square centimeter (FN) and the total fiber number (TFN). Moreover, one QTL on pig chromosome 14 was found to affect both FN and TFN. Furthermore, four plausible candidate genes associated with FN (kinase non-catalytic C-lobe domain containing [KNDC1]), TFN (KNDC1), and I_RA (solute carrier family 36 member 4, contactin associated protein like 5, and glutamate metabotropic receptor 8) were identified. Conclusion: An efficient and powerful imputation-based association approach was utilized to identify genes potentially associated with muscle fiber traits. These identified genes and SNPs could be explored to improve meat production and quality via marker-assisted selection in pigs.

• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1470-1476
• /
• 2002

The goal of this work is to design and build an implantable artificial lung that can be inserted as a whole into a large vein in the body with the least effect on cardiovascular hemodynamics. The experimental results demonstrate that the pressure drop is not entirely related to viscosity effects. The friction factor decreases with an increase in the number of tied-hollow fibers at a constant Reynolds number A uniform flow pattern without stagnation is observed at all numbers of tied hollow fibers tested. The tied hollow fiber module, built in this study with 3 cm of outer diameter of module. 380 m of outer diameter of tied hollow fiber, and 700 number of tied hollow fiber with length of 60 cm, which shows a pressure drop of 13-16 mmHg, satisfies the required pressure drop qualifying 15 mmHg as an intravascular artificial lung.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권3호
• /
• pp.121-129
• /
• 2002

Existing methods for optimization of sequences by random mutagenesis generate libraries with a small number of mostly deleterious mutations, resulting in libraries containing a large fraction of non-functional clones that explore only a small part of sequence space. Large numbers of clones need to be screened to find the rare mutants with improvements. Library display formats are useful to screen very large libraries but impose screening limitations that limit the value of this approach for most commercial applications. By contrast, in both classical breeding and in DNA shuffling, natural diversity is permutated by homologous recombination, generating libraries of very high quality, from which improved clones can be identified with a small number of complex screens. Given that this small number of screens can be performed under the conditions of actual use of the product, commercially relevant improvements can be reliably obtained.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.113-119
• /
• 1998

An experimental study was carried out in a three-dimensional cubic cavity driven by 2-dimensional plane Poiseuille flow for three kinds of Reynolds number, $10^4$, 3 $\times$ $10^4$ and 5 $\times$ $10^4$ based on the cavity width and cavity inlet mean flow velcoity. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system. Laser based illumination and two-frame grey-level cross correlation algorithm are adopted. Severe unsteady flow fluctuation within the cavity are remarkable at above Re = 3 $\times$ $10^4$ Reynolds numbers and sheared mixing layer phenomena are also found at the region where inlet driving Poiseuille flow is collided with the clock-wise rotating main primary vortex at upper center area. Instant velocity profiles reveal that deformed forced vortex formation is observed throughout the separate two areas.