• 한국안전학회지
• /
• 제28권3호
• /
• pp.69-73
• /
• 2013

The purpose of this paper is to analyze the carbonization pattern and operation characteristics of an MCCB. The MCCB is consisted of the actuator lever, actuator mechanism, bimetallic strip, contacts, up and down operator, arc divider or extinguisher, metal operation pin, terminal part, etc. When the actuator lever of the MCCB is at the top or the internal metal operation pin is in contact with the front part, the MCCB is turned on or off. It means trip state if the actuator lever or the internal metal operation pin moves to back side. In the UL 94 vertical combustion test, white smoke occurred from the MCCB when an average of 17~24 seconds elapsed after the MCCB was ignited and black smoke occurred when an average of 45~50 seconds elapsed. It took 5~6 minutes for the MCCB surface to be half burnt and took an average of 8~9 minutes for the MCCB surface to be entirely burnt. In the UL 94 test, the MCCB trip device operated when an average 7~8 minutes elapsed. If the MCCB trip has occurred, it may have been caused by an electrical problem such as a short-circuit, overcurrent, etc., as well as fire heat. From the entire part combustion test according to KS C 3004, it was found that the metal operation pin could be moved to the MCCB trip position without any electrical problems.

• 한국식품영양과학회지
• /
• 제12권4호
• /
• pp.374-381
• /
• 1983

다획성 적색육어류(多獲性赤色肉魚類)인 정어리를 효율적으로 이용하기 위한 방안의 하나로 정어리소시지의 품질을 개선하고자, 소시지의 원료로서 정어리를 사용하였을 때의 제품의 가공조건을 구명하고, 대두단백질과 훈액을 첨가했을 때 정어리소시지의 품질에 미치는 효과를 검토하였다. 정어리소시지 제조시 첨가물의 최적첨가량은 수세육에 대해 소금 1.5%, 설탕 1.5%, 글루탐산나트륨 0.2%, 후추가루 0.2%, 마늘가루 0.2%, nutmeg 0.2%, beef extract 0.4% 및 식용색소액(Red 40호와 Yellow 5호의 혼합액) 0.05%이었으며, 훈액은 수세육에 대해 0.1~0.2% 첨가하는 것이 좋았다. 이들 최적첨가량으로 선어를 이용한 정어리소시지 제조시 탄력보강제는 옥수수전분 10%에 대해 ${\alpha}$-starch와 대두단백질을 각각 2%, 3% 대체하여 첨가하는 것이 texture나 식감면(食感面)에서 적합하였다.

• Clinical and Experimental Pediatrics
• /
• 제48권5호
• /
• pp.461-468
• /
• 2005

The major function of immune system is to protect infections. The immune systems are composed of innate and adaptive immunity. In adaptive immunity, the cellular and humoral components interact each other. Neonates and infants are infected frequently, because immune systems are naive and easy to expose to infectious agents. The complete history and physical examination is essential to evaluate the child with recurrent infections. The environmental risk factors of recurrent infections are day care center, cigarette smoke, and air pollution. The underlying diseases such as immunodeficiency, autoimmune diseases, allergy, and disorders of anatomy or physiology increase the susceptibility to infections. In immunodeficiency, infections are characterized by severe, chronic, recurrent, and unusual microbial agents infection. The defects of antibody production are susceptible to sinopulmonary bacterial infections. T cells defects are vulerable to numerous organisms such as virus, fungi, bacteria and etc. The screening tests for immune functions are the quantitative and qualitative measurements of each immune components. A complete blood count with white blood cell, differential, and platelet provide quantitative informations of immune components. Total complement and immunoglobulin levels represent the humoral component. Antibody levels of previously injected vaccines also provide informations of the antigen specific antibody immune responses. T cell and subsets count is quantitative measurement of cell mediated immunity. Delayed hypersensitivity skin test is a crude measurement of T cell function. The long term outcome of children with recurrent infections is completely dependent on the underlying diseases, the initial time of diagnosis and therapy, continued management, and genetic counscelling.

• 한국추진공학회지
• /
• 제23권5호
• /
• pp.53-59
• /
• 2019

고체연료는 추진제 연소 시 산화제와 반응하여 추진제 성능을 증가시키는 역할을 한다. 대표적인 고체연료는 Al, RDX, HMX 등이 있다. 이들 물질은 연소 시 수분과 만나 흰색 연기를 발생시키고, 일산화탄소, 이산화탄소, 메탄가스 등의 환경유해 물질을 다량 발생시킨다. 이러한 문제를 해결하기 위해 본 연구에서는 고체 연료로 사용 가능한 고질소 에너지 물질인 hydrazinium 5-aminotetrazolate(HAT)를 제조하였다. 분광분석(NMR)을 통해 HAT의 구조를 분석하였으며, DSC를 이용하여 열특성 분석을 하였다. 또한, EXPLO5 프로그램을 이용하여 비추력, 가스발생량 등을 계산하였다.

• 한국화재소방학회논문지
• /
• 제33권6호
• /
• pp.126-131
• /
• 2019

과열방지장치가 없는 가스레인지를 이용하여 동물성 식품의 실물 화재 실험을 실시하였다. 동물성 식품의 연소 초기에는 흰색의 연기와 수증기가 다량 발생했으나 물기가 없어지고 동물성 식품의 탄화가 시작되면 검정색 연기가 발생하였다. 가스레인지의 과열 시간이 5,400 s가 경과되어도 고등어, 명태 및 닭고기 등은 착화되지 못했다. 그러나 돼지고기는 2,643 s, 쇠고기는 2,819 s, 참치는 6,492 s에서 발화되는 것을 확인하였다. 동물성 식품의 화염 패턴은 층류와 난류가 혼합된 형태이며, 달무리 패턴(Halo Pattern)이 발생하는 것을 알 수 있었다. 주방 후드가 작동할 때의 화염은 모래시계 패턴을 형성하였고, 주방 후드가 작동하지 않을 때는 삼각형 패턴을 나타냈다. 냄비에 담긴 참치가 과열되면 6,492 s에 자연발화 되었고, 주방 후드의 표면 온도는 464.5 ℃로 급격히 상승하였다. 그리고 냄비 상부의 바깥 표면으로부터 6 cm 이격된 냄비 후면의 온도는 6,660 s에 복사열로 인해 869 ℃로 측정되었다. 화염에 의해 소손된 주방 벽면에는 모래시계 패턴이 형성되었으며, 주방 후드가 작동하지 않거나 천장 높이보다 화염이 작게 성장할 때는 삼각형 패턴을 나타내는 것이 확인되었다.

• 한국콘텐츠학회논문지
• /
• 제17권1호
• /
• pp.183-192
• /
• 2017

본 연구는 흡연자와 비흡연자 모두를 위해 담배 연기로 인한 피해를 최소화하고 사용자에게 편안함을 줄 수 있는 흡연 부스를 디자인하기 위함이다. 연구방법으로 첫째, 흡연부스에 대한 의식조사, 둘째 제품 디자인에 대한 선호도조사, 셋째 감성어휘에 의한 흡연부스 감성평가 조사를 하였다. 흡연부스에 대한 의식조사결과, 대부분 모든 사람들이 터미널, 역에 흡연부스가 필요하다고 하였다. 디자인 선호도에 조사결과로 첫째, 외부 흡연자를 위한 디자인부스는 딱딱하고 투박한 이미지 보다는 멀리서도 알기 쉽고 거부감이 들지 않는 형태의 디자인으로 제작되어져야 한다. 둘째, 원색 계열의 색상보다는 화이트와 파스텔 톤의 난색계열 및 밝은 색상을 적용하여 디자인한다. 셋째, 흡연부스이므로 내부 순환 필터 문제가 잘 관리 될 수 있도록 한다. 감성어휘에 의한 감성평가결과 자극물에 대하여 4가지 차원으로 구분하여 인지하고 있었다. 각 인자의 함축 언어로 1인자에 대한 대표 이미지 언어는 '기능적 감정' 2인자의 대표 이미지 언어는 '심리적감정' 3인자의 대표 이미지 언어는 '색상감정' 4인자의 대표 이미지 언어는 '형태감정'으로 정의하였다. 흡연자와 비 흡연자 양쪽 모두를 위해 담배연기로 인한 피해를 최소화 시킬 수 있어야 하며 혼자만의 휴식을 취할 수 있는 사용자 중심의 서비스 디자인이 필요하다.

• 한국전기전자재료학회논문지
• /
• 제23권9호
• /
• pp.708-713
• /
• 2010

In this research a ring light was developed so that a partial shadowless shooting for the patient's affected area at the medical treatment room and surgical operation room using high luminance light emitting diode (LED) for which attention is being paid as new lighting parts for medical purpose. LED which was applied to the development used high luminance three color LED for full color for which various color materialization and the adjustment of radiation intensity are possible and we can get white light in order to emphasize the delicate expression for generic tone of shooting object, strong highlight, simple shadow and three dimensional effect at the time of close-up shadowless shooting of the affected area. And at the time of design of ring light, the characteristics of LED and the loss of light at the time of penetrating light diffusion PC were considered so that intensity of illumination for over 150 lx can be obtained. The result of measurement of the intensity of illumination of the ring light that was developed revealed that maximum intensity of illumination of 225.7 lx was obtained, while smoke index was measured to be maximum 78 Ra in the case of Red(50%) Green(100%) and Blue LED(60%). We could confirm that response speed was also very fast as 1.72 ms.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.57-62
• /
• 2012

The purpose of this paper is to find dangerous factors of a water purifier when water leaks due to inappropriate use and analyze the patterns of damaged parts in order to provide data for the examination of the cause of the problem. If the water purifier is inspected and managed by a non-specialist, when the FLC(Float Level Controller) at the top is inclined, water leakage may occur to the water purifier. The leaked water flows onto the cables and hoses and enters the thermostat terminal, heater, PCB, power supply connection connector, etc., becoming a dangerous factor that may cause a system failure, fire, etc. Due to the water that entered the input terminal, low noise and white smoke were generated at first. However, the flame gradually propagated due to the continuous inflow of moisture. It was found that when moisture reached the PCB, a carbonized conductive path was formed at the varistor terminal, input terminal, semiconductor device terminal, etc., and the flame became larger, which might result in a fire. From the metal microscope analysis of a damaged condenser terminal, it was found that the amorphous structure unique to copper cable disappeared, and voids, boundary surface and disorderly fine particles occurred. Also, in the case of the connector into which moisture penetrated, fusion and deformation occurred at the cable connection clips. The result of analysis of the power supply cable connector using a thermal image camera showed that most of the heat was generated from the cable connection clips and the temperature at the connection center was normal.

• Journal of Information Technology Applications and Management
• /
• 제28권3호
• /
• pp.77-87
• /
• 2021

The color gray in the cinema expresses the private or public memory and oblivion in the reminiscence scenes. The aesthetic function and meaning of gray that interacts with other elements in cinematic time and space are expanded in various ways. This study was analyzed the cases in which gray was used as the main visual style by limiting the scope to Korean films. Based on the traditional cultural symbolic meaning of gray, I analyzed how it was applied and transformed in films, and interpreted the cultural-social meaning by the interaction between gray and other elements. In film history starting from monochrome, gray has been used as a visual device suitable for realizing cinematic or imaginary reality. Gray is adopted when dreams or recollections are visualized as imaginary reality, and it is used when dreamy imaginations of daydreaming are demonstrated. Gray, which reproduces the dreamlike reality of imagination, is the concrete and realistic way of expression. First, in Korean films, gray is a flashback visual device that recalls the past, and is an intermediary visual form that materializes the imaginary. In films such as Ode to My Father (2014), DongJu (2015), A Resistance(2019) and The Battle : Roar to Victory (2019), the gray of the past is a visual device for cultural memory that builds the homogeneity and identity of the group. In the era of hyper-visibility, gray in black and white images is intended to be clearly remembered by unfamiliarity rather than blurry oblivion by familiarity. Second, in genre films with disaster materials such as Train To Busan (2016) and Ashfall (2019), the grays of rain, fog, clouds, shadows and smoke highlight other elements, and the gray color causes anxiety and fear. In war films such as TaeGukGi: Brotherhood Of War (2003) and The Front Line (2011), gray shows a more intense brutality than the primary color. In sports films such as 4th Place (2015), Take Off (2009) and Forever The Moment (2007), gray expresses uncertainty and immaturity. Third, gray visualizes the historical memory of A Petal (1996), the oblivion in Oh! My Gran (2020) and Poetry (2010), and the reality of daydreaming Gagman (1988) and Dream (1990). At the boundary between imagination and reality, gray is a visual form of dreams, memories and forgetfulness.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.256-273
• /
• 2023

Among the dyeing industries, the tenter process is a process that improves the quality of fibers by drying and ironing (heat treatment) dyed fabrics, and drugs such as water repellents, antistatic agents, and fiber softeners are mainly used in these tenter processes. These drugs are vaporized in the process of treatment by high temperatures (180 ~ 230℃), and are observed in a complex form such as white smoke, oil mist, and fine dust, causing odor. To treat the complex exhaust gas at the rear end of the tenter facility, most companies operate by installing a wet scrubber and an adsorption tower alone or in parallel, but there are many problems. In particular, the insoluble oil mist at the rear end of the tenter has significantly low processing efficiency in the cleaning dust collection facility, and there is a problem in the facility by adsorption due to the occlusion phenomenon caused by the oil mist. In addition, the odor gas at the rear end of the tenter contains a lot of aldehydes, and in order to improve these various problems, a complex exhaust purification device using cyclone and electric support collector was developed. This study examined the applicability of economical and efficient technology by removing complex air pollution at the rear end of the tenter and applying improved technology than the existing technology.