• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.171-181
• /
• 2004

A multi axis whetstone polishing system, which uses the flow system of the stone polishing machine head, has been developed. The test results show that the defect by line contact polishing does not occur in both ends of the stone and that it came to trim smoothly. In terms of the surface roughness, the corresponding index was decreased by 3.6 times, improving the polishing effect greatly. It decreased significantly the dust and noise with the wet polishing. The factors of the duty evasion at production site can thus be solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.5
• /
• pp.498-506
• /
• 2009

An experimental study was performed to select cutting parameters for better quality-products in hard metals such as steels. Usually, a hard metal can be cut with a rotary cutting knife and the process provides a good cutting quality result. However, the cutting machine is much sensitive in cutting conditions because of its complicated mechanism. By this reason, careful processing conditions must be taken to improve the quality of the products. This experimental study for better quality products with a rotary cutting knife was carried out with two main factors; cutting speeds and cutting and pooling forces. A two-dimensional profile measuring instrument is used to evaluate its cutting faces and the effects of processing factors are analyzed by a commercial software.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.189-195
• /
• 2004

It compared quality characteristics for the stone surface treatment system and its products. With the result, the flame burner equipment was mainly used to the surface treatment of granite, but it occurred greatly the high temperature, the rock fragment, the noise and dust. For the other side, the whetstone polishing machine for the polishing was a maintenance for the specific physical properties of stone, and it did not occur the stone fragment and the dust. The durability of the stone products due to the flame burner was investigated with that it falls to $20\sim25\%$ more than the surface treatment by the whetstone polishing. Share's hardness of the polishing products in the durability test showed more greatly index than the flame burner and conventional product. The polishing products of Pochon stone in the case of the abrasion resistance showed great more $15\%$ than the general products, more $9\%$ than the products by the flame burner.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.165-170
• /
• 2004

It used the flow system of the stone polishing machine head and it developed a multi axis whetstone polishing system. With the result, the defect by line contact polishing does not occur in both ends of the stone, and it came to trim smoothly. As the index of the surface roughness decreased to 3.6 times, the polishing effect improved greatly. It decreased greatly the dust and a noise with the wet polishing, and the factors of the duty evasion at production site were solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.1_2
• /
• pp.90-102
• /
• 2001

리오더버퍼는 명령어를 비순차로 이슈하는 수퍼스칼라 파이프라인에서의 명령어 실행을 순차적으로 완료하는데 사용된다. 본 논문에서는 리오더버퍼에 의하여 발생할 수 있는 명령어의 스테그네이션(stagnation)을 효율적으로 제거시킬 뿐만 아니라 리오더버퍼의 크기를 감소시킬 수 있는 쉘터버퍼를 사용한 리오더버퍼 구조를 제안하였다. 시뮬레이션을 수행한 결과 리오더버퍼의 엔트리 개수가 8개에서 32개 사이일 때 쉘터버퍼는 단지 1개 또는 2개만 사용하여도 뚜렷한 성능 향상을 얻을 수 있음을 보여준다. 쉘터버퍼를 4개 사용했을 때는 2개만 사용했을 경우와 비교하여 주목할만한 성능 향상은 없었다. 이는 쉘터버퍼를 2개만 사용하여도 대부분의 스테그네이션을 제거하는데 충분함을 보여준다. 실행율의 손실이 없는 상태에서 2개의 쉘터버퍼를 사용하면 Whetstone 벤치마크 프로그램에서는 44%, FFT 벤치마크 프로그램에서는 50%, FM 벤치마크 프로그램에서는 60%, Linpack 벤치마크 프로그램에서는 75%의 리오더버퍼의 크기를 줄일 수 있었다. 쉘터버퍼를 사용했을 때 수행 시간 역시 Whetstone에서는 19.78%, FFT에서는 19.67%, FM에서는 23.93%, Linpack에서는 8.65%의 성능 향상을 얻을 수 있었다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.275-281
• /
• 2010

This research's goal is to process directly aspherics with big sagment and thin center thickness. If we can process directly aspherics with big sagment and thin center thickness, we think it greatly helps to reduce the time of developing optical system. We made very thin glass using diamond grinding whetstone regarding the trace of tool and the detailed drawing of tool super precisive aspherics that has 0.46mm center thickness and over $30^{\circ}$ segment, $0.1{\mu}m$ machining accuracy, 15nm surface accuracy. We think this research's result will be effective to open new market because it is applied not only cell phone optical system but also CCTV robot optical system, internet phone optical system. Also we expect to enhance the super strong brittle precisive process's possibility with super precisive processing technique that achieves 0.46mm glass center thickness as first in the world.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.144-147
• /
• 2015

big.LITTLE 구조는 고성능 코어와 저전력 코어를 조합하여 전력과 성능, 일석이조의 효과를 볼 수 있다. CPU의 연산에 집중된 벤치마크인 MP Whetstone과 MP Dhrystone을 통해 2개의 고성능 코어와 4개의 저전력 코어에서 가능한 모든 조합의 전력과 처리량을 분석하여 big.LITTLE 구조의 효율성을 확인할 수 있을 것으로 보인다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.1
• /
• pp.51-61
• /
• 2019

There are strict evaluation processes before using new processors to satellites. Engineers evaluate processors from various viewpoints including specification, development environment, and cost. From a viewpoint of computation power, manufacturers provide benchmark results with processors, and engineers decide which processors are adequate to their satellites by comparing the benchmark results with requirements of their satellites. However, the benchmark results depends on a test environment of manufacturers, and it is quite difficult to achieve similar performance in a target environment. Therefore, it is necessary to evaluate the processors in the target environment. This paper compares performance of a processor, AT697F/LEON2, in software testbed (STB) with three development boards of XC2V/LEON3, GR712RC/LEON3, and GR740/LEON4. Seven benchmark functions of Dhrystone, Stanford, Coremark, Whetstone, Flops, NBench, and MiBench are selected. Results are analyzed with hardware and software properties: hardware properties of core architecture, number of cores, cache, and memory; and software properties of build options and compilers. Based on the analysis, this paper describes a guideline for choosing processors for next generation satellites.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.4
• /
• pp.397-402
• /
• 2013

In this study, we carried out the each lines of section, using GC (green silicon carbide) whetstone, the SCM415 material which separated by after and before heat treatments process, in 3+2 axis machining centers for integrated grinding after cutting end mill works, the spindle speed 8000 rpm and feed rate 150 mm/min. For the analysis of the centerline average roughness (Ra), we measured by 10 steps stages. Using Finite element analysis, we found the result of the load analysis effect of the assembly parts, when applied the 11 kg's load on both side of the ATC (Automatic tool change) arm. The result is as follows. For the centerline average roughness (Ra) in the non-heat treatment work pieces, are appeared the most favorable in the tenth section are $0.510{\mu}m$, that were shown in the near the straight line section which is the smallest deformation of curve. In addition, the bad surface roughness appears on the path is to long by changing angle, the more inclined depth of cut, because the chip discharging is not smoothly.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.661-674
• /
• 2023

From the seafloor of Taean, Chungcheongnamdo Province, a ship of the Joseon Dynasty was discovered for the first time in the history of underwater excavations in Korea in 2014 and was named Mado Shipwreck No. 4. A total of 27 unused whetstones loaded as tribute were discovered on the hull of Mado No. 4, which revealed that Mado Shipwreck No. 4 was a Grain transport ship that sank while carrying tribute from Naju to Hanyang between 1417 and 1425 (King Taejong to King Sejong). All of the 27 whetstones are in the shape of narrow and long sticks. The average values of length, width, thickness, and weight are 161.5 mm, 36.1 mm, 22.7 mm, and 253.2 g, respectively. The result of X-ray diffraction analysis shows that the constituent minerals are quartz, alkali feldspar, and plagioclase, which is similar to that of the high-resolution digital stereomicroscope analysis. The average porosity of Mado-2672 and 2673 is 2.69% and 1.78%, respectively, and the average surface hardness is 807.2HLD and 834.5HLD, respectively. It is interpreted that if the porosity increases beyond a certain level, it affects the decrease in surface hardness. All of these are made of feldspathic sandstones with an average SiO₂ content of 74.51% and were confirmed to be suitable as grindstones. They are all medium whetstones when classified based on the SiO₂ content. These whetstones are small in size and weight and are convenient to carry, so they are presumed to be a type of non-stationary whetstone, and are estimated to have been mainly used in the fields such as weapon polishing and craft production during the Joseon Dynasty.