• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.109-111
• /
• 2009

In this paper, we discuss how to design 2-wheeled mobile robot hard wares as reasonable and practical as possible. A segway type mobile robot consists of 2 wheels only, placed in parallel rather than horizon. 2-wheeled mobile robots make you overcome high cost and time consuming maintenance procedures of the robot by reducing the number of robot hardwares. The most challenging thing in a 2-wheeled mobile robot that has many more valid virtues than the traditional mobile robots is to make it balance itself whenever it stands still or goes forward. But balancing itself is not an easy matter and there are many researches and experiments on this issue. When researchers test theories on 2-wheeled mobile robots to improve its self balancing performance, they should consider how to design hard wares of that mobile robot. No matter how great those new theories are, if a testbed for those theories is not suitable, performance output would be poor and meaningless. In this point of view, to design a proper 2-wheeled mobile robot as a testbed is a very important issue with development of new theories. So we define 4 guide lines to design segway type mobile robots reasonably; about motor, battery, and MCU selection and shock-proof design with robust motor setting.

• 전기학회논문지P
• /
• 제53권4호
• /
• pp.201-204
• /
• 2004

In this paper, a direct adaptive tracking controller based Lyapunov method is designed for a wheeled mobile robots. A wheeled mobile robots have three degrees of freedom and two control variables. Therefore, it is difficult to control a mobile robot using the general linear control. We introduce two kinds of Lyapunov function for the design of the controller and verify the controller. A mobile robots using the designed adaptive direct tracking controller is well-behaved and is easily implemented.

• 한국컴퓨터산업학회논문지
• /
• 제5권9호
• /
• pp.993-1004
• /
• 2004

본 논문에서는 구동토크의 제약을 갖는 4륜 2자유도 구륜이동로봇의 기구학 및 동력학 모델링과 경로추적을 다룬다. 유도된 기구학 모델을 이용하여 구륜이퐁로봇의 가제어성을 조사한다. 순간일치좌표계와 힘/토크의 전파, 뉴튼의 평형법칙을 이용하여 동려학 모델을 유도한다. 역동력학에 의해 산출된 구동토크가 한계 구동토크를 초과할 경우, time-scaling 기법을 이용하여 기준제적을 수정함으로써 구륜이동로봇이 기준경로를 추적하도록 한다. 제어기는 모델링 불확실성과 측정 잡음 등으로 인하여 발생하는 오차를 보상하도록 설계한다. 또한 본 논문에서 제시된 기법의 유효성을 입증하기 위해 모의실험을 수행하고 그 결과를 제시한다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권8호
• /
• pp.482-491
• /
• 2003

In this paper are presented kinematic and dynamic modeling and path-tracking of four-wheeled mobile robots with 2 d.o.f haying the limited drive-torques. Controllability of wheeled-mobile robots is revealed by the kinematic model. Instantaneously coincident coordinate system, force/torque propagation and Newton's equilibrium law are used to drive the dynamic model. When drive-torques generated by inverse dynamics exceed the limitation, we make wheeled-mobile robots follow the reference path by modifying the planned reference trajectory with time-scaling. The controller is introduced to compensate for error owing to modeling uncertainty and measurement noise. And simulation results prove that method proposed by this paper is efficient.

• 제어로봇시스템학회논문지
• /
• 제6권8호
• /
• pp.689-696
• /
• 2000

In this paper we propose an eminent controller for wheeled mobile robots. This controller consists of an input-output linearization controller trying to stabilize the system and a neural network controller to compensate for uncertainties. The uncertainties are divided into two parts. First unstructured uncertainties include the elements related with system order such as friction disturbance. Second structure uncertainties are the incorrect system parameters A neural network structure of the proposed overall controller learns structural errors of the wheeled mobile robots with uncertainties and includes the neural network output. This controller learns quickly the model and has good tracking performance Simulation results show that the proposed controller is more efficient than analog controllers.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2053-2056
• /
• 2016

In this paper, we propose an output feedback tracking control method for the wheeled mobile robots with kinematic disturbances. The kinematic disturbances should be compensated to avoid the performance degradation. Also, the unavailable velocity of the mobile robot should be estimated. These should be estimated together by designing the nonlinear observer. Based on these estimates, the output feedback controller can be designed. The stability of the mobile robot control systems using the proposed method is rigorously analyzed and the simulation results are also provided to validate the proposed method.

• 제어로봇시스템학회논문지
• /
• 제19권1호
• /
• pp.56-64
• /
• 2013

We propose an efficient minimum-time cornering motion planning algorithms for differential-driven wheeled mobile robots with motor control input constraint, under piecewise constant control input sections. First, we established mobile robot's kinematics and dynamics including motors, divided the cornering trajectory for collision-free into one translational section, followed by one rotational section with angular acceleration, and finally the other rotational section with angular deceleration. We constructed an efficient motion planning algorithm satisfying the bang-bang principle. Various simulations and experiments reveal the performance of the proposed algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.415-417
• /
• 2005

This paper proposes tracking control method using pseudo-backstepping control for wheeled mobile robots with nonholonomic constraints. First, the pseudo commands for forward linear velocity and angular velocity are chosen based on the kinematics. Then, the actual torque control inputs are designed to make the actual forward linear velocity and angular velocity follow the pseudo commands. Both semi-global practical posture(position and heading direction angle) stabilization and trajectory tracking are achieved for reference trajectories such as straight line and sinusoidal curve. The stability and performance analysed and numerical simulations are performed to confirm the effectiveness of the proposed scheme.

• 전기학회논문지P
• /
• 제51권1호
• /
• pp.45-51
• /
• 2002

In this paper are presented dynamic modeling and path-tracking of differential drive wheeled-mobile robots(WMRs) having the limited drive-torques. Instantaneously coincident coordinate system, force/torque propagation and Newton's equilibrium law are used to induce the dynamic model. When drive-torques generated by inverse dynamics exceed the limitation, we make wheeled-mobile robots follow the reference path by modifying the planned reference trajectory with time-scaling method. The controller is introduced to compensate for error owing to modeling uncertainty and measurement noise. And simulation results prove that method proposed by this paper is efficient.

• 제어로봇시스템학회논문지
• /
• 제6권7호
• /
• pp.586-593
• /
• 2000

In this paper we propose a new approach to the autonomous wall-following of wheeled mobile robots using hybrid system reference motion synthesis and generation. The hybrid system approach is in-troduced to the motion control of nonholonomic mobile robots for the indoor navigation problems. In the dis-crete event system the discrete states are defined by the user-defined constraints and the reference mo-tion commands are specified in the abstracted motions. The hybrid control system applied for the non-holonomic mobile robots can combine the motion planning and autonomous navigation with obstacle avoid-ance for the indoor navigation problem. Simulation results show that hybrid system approach is an effective method for the autonomous navigation in indoor environments.