• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1172-1177
• /
• 2003

In this paper, we propose an obstacle avoidance technique in trajectory tracking of nonholonomic wheeled mobile robots. Input-output linearized backstepping controller is used in trajectory tracking, and repulsive type control input for obstacle avoidance is added to it. The added input is generated by fuzzy logic. And we do not add the two inputs directly but combine them via fuzzy logic, which determines the ratings of each input. Some simulations are performed to show that with the proposed algorithm, the mobile robot can track its reference trajectory even if there are multiple obstacles on the trajectory of robot.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.3
• /
• pp.283-294
• /
• 2007

In this paper, a nonlinear controller based on adaptive sliding-mode method which has a sliding surface vector including new boundizing function is proposed and applied to a two-wheeled welding mobile robot (WMR). This controller makes the welding point of WMR achieve tracking a reference point which is moving on a smooth curved welding path with a desired constant velocity. The mobile robot is considered in view of a kinematic model and a dynamic model in Cartesian coordinates. The proposed controller can overcome uncertainties and external disturbances by adaptive sliding-mode technique. To design the controller, the tracking error vector is defined, and then the sliding surface vector including new boundizing function and the adaptation laws are chosen to guarantee that the error vector converges to zero asymptotically. The stability of the dynamic system is shown through the Lyapunov method. In addition, a simple way of measuring the errors by potentiometers is introduced. The simulations and experimental results are shown to prove the effectiveness of the proposed controller.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.584-586
• /
• 2005

In this paper, low cost inertial sensor and compass were used instead of encoder for localization of mobile robot. Movements by encoder, movements by inertial sensor and movements by complementary filter with inertial sensor and compass were analyzed. Movement by complementary filter was worse than by only inertial sensor because of imperfection of compass. For the complementary filter to show best movements, compass need to be compensated for position error.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.3
• /
• pp.60-69
• /
• 1993

The speed control associated with dc servo motors for direct-drive applications of mobile robot is considered in this study. Robot is moved by power wheeled steering of two dc servo motors mounted to it. In order to cooperate with micro-computer and to achieve the high-performance operation of dc servo motor, speed control system is composed of a digital Phase Locked Loop and H-type drive circuit. And the motor is driven by Pulse Width Modulations. In controlling PWM, it is modified to compose of H-type drive circuit with feedback diodes and switching transistor and design of control sequence so that it may show linear characteristics. As a result, speed characteristics of motor showed linear features. In order to get data on design of PLL control system, the parameters of 80[W[ motor & robot device is measured by simple software control. The PLL speed control system is schemed and designed by leaner drive circuit and measured parameters. A complete speed control system applied to 80[W] dc servo motor showed good linearity, stability and high response. Also, it is verified that the PLL speed control system has good compatibility as a mobile robot driver.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.187-190
• /
• 1997

In the past few years, many researchers are interesting of control of mobile robot with nonholonomic constraints. And tracking problems is important as well as regulation in nonholonomic system control. Some researchers have investigated the stable tracking control law for mobile robot. But, few results showed the globally asymptotically stable control method simply. So, we address the design of globally asymptotically stable tracking control law for mobile robot with nonholonomic velocity constraints using simple method. The stabilizability of the controller is derived by Lyapunov direct method. And we analyze the system responses according to the variation of control parameters in line tracking problem. It is derived that the responses represent no overshoot property in line tracking. Examples are two-wheeled mobile robot and car-like mobile robot and the simulation results represent the effectiveness of our method.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.72-75
• /
• 2001

In this paper, the kinematic model and motion control of a joint-actuated mobile robot are analyzed. To take an efficient approach to the wheeled mobile robots, the relationship between wheel rotation and the contact point of the wheel is considered. It is shown that each addition of a joint to a mobile robot increases the degree of freedom(DOF) of mobile robot, and the way of joint attachment to a mobile robot is proposed. To get a solution of inverse kinematics of mobile robot, two types of approaches are proposed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.1
• /
• pp.56-64
• /
• 2013

We propose an efficient minimum-time cornering motion planning algorithms for differential-driven wheeled mobile robots with motor control input constraint, under piecewise constant control input sections. First, we established mobile robot's kinematics and dynamics including motors, divided the cornering trajectory for collision-free into one translational section, followed by one rotational section with angular acceleration, and finally the other rotational section with angular deceleration. We constructed an efficient motion planning algorithm satisfying the bang-bang principle. Various simulations and experiments reveal the performance of the proposed algorithm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.9
• /
• pp.766-773
• /
• 2001

Omni-directional mobile robots have been popularly employed in several application areas. However, the kinematics for these systems have not been clearly identified, specially for redundantly actuated case which is common in omni-directional mobile robot such as the Nomadic model. For such mobile robot systems, exploitation of redundant actuation as well as singularity analysis has not been extensively addressed. In light of this fact, this paper introduces two different kinematic approaches for omni-directional mobile robots. Then, a singular-free load distribution scheme for redundantly actuated three-wheeled omni-directional mobile robot is proposed. Through simulation, several advantages of redundantly actuated mobile robot in aspect of singularity avoidance, minimization of torque norm, and exploiting several subtasks are presented.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.12
• /
• pp.19-29
• /
• 1997

This paper presents stable kinematic modeling and path planning and path tracking algorithms for the poisition control of 4-wheeled 2-d.o.f(degree of freedom) mobile robot. We drived the actuated inverse and sensed forward solution for the calculation of actuator velocity and robot velocities. the deal-reckoning algorithm is introduced to calculate the position of WMR in real time. The gaussian functions are applied to control and to design the smooth orientation angle of WMR and the path planning algorithm for obstacle avoidance is prosed. We composed feedback control system to compensate for error because of uncertainty kinematic modeling and measurement noise. The simulation resutls show that the proposed kinematkc modeling and path planning and feedback control algorithms are useful.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.947-948
• /
• 2006

This paper proposes a robust posture stabilization control method for wheeled mobile robots. To solve the robust posture stabilization, we introduce reference generation mode, reference tracking mode, and reference regulation mode. In reference generation mode, a kinematic time-invariant controller is used to generate the reference trajectory which starts from the initial posture of the actual robot to the desired posture. In reference tracking mode, a sliding mode position controller is employed in such a way that the actual robot can follow the reference trajectory in the desired forward or backward moving direction, even in the presence of the disturbances in the dynamics. In reference regulation mode, a sliding mode heading direction controller is used such that the actual robot can maintain the desired posture against the disturbances. In this way, robust posture stabilization can be achieved at almost all global regions.