• 디지털산업정보학회논문지
• /
• 제9권1호
• /
• pp.73-78
• /
• 2013

In this paper, configuration control for the Horizontal Maintenance of the 2 wheel robot has been studied using ARS(Attitude Refrence System). The 2 wheel robot technique is getting attention and there have been many researches on the seg-way since the US. Using its 2 freedom, a 2 wheel robot can move in various modes and Our robot performs goal reaching ARS.2 wheel robot fall down to the forward or reverse direction to converge to the stable point. Kalman Filter is normally used for the algorithm and numerous research is progressing at the moment. To calculate the attitude in ARS using 2 axis gyro(roll, pitch) and 3 axis accelerometers (x, y, z). In this paper we present a two wheel robot system for an autonomous mobile robot. This paper realized the robot control method which is much simpler but able to get desired performance by using the ARS control.

• 한국정밀공학회지
• /
• 제30권11호
• /
• pp.1161-1169
• /
• 2013

In this paper an omni-directional mobile robot is suggested for educational robot platform. Comparing to other robots, a mobile robot can be easily designed and manufactured due to its simple geometric structure. Moreover, since it is required to have low DOF motion on planar space, fabrication of control system is also simple. In this research, omni-directional wheels were adopted to remove the non-holonomic characteristic of conventional wheels and facilitate control system design. Firstly, geometric structure of a Mecanum wheel which is a most frequently used omni-directional wheel was demonstrated. Then, the organization of the mobile platform was suggested in aspects of mechanism manufacturing and electronic hardware design. Finally, a methodology of control system development was introduced for educational purpose. Due to an intuitive motion generating ability, simple hardware composition, and convenient control algorithm applicability, the omni-directional mobile robot suggested in this research is expected to be a promising educational platform.

• 한국산업정보학회논문지
• /
• 제27권2호
• /
• pp.53-59
• /
• 2022

본 논문에서는 사용자의 다양한 작업 환경을 고려하여 원격 제어가 가능한 이동식 로봇을 설계한다. 구체적으로는 소정의 방향으로 이동하며, 사용자의 손동작 움직임에 동기화되어 일련의 작업을 수행할 수 있는 이동식 원격작업 로봇, 그리고 이를 제어하는 제어시스템 및 제어방법을 제안하였다. 위험물 또는 고중량 물품 운반과 같은 작업 보조를 위해 로봇 손과 이동을 위한 휠을 이용하여 구현하였다. 개발한 로봇의 성능 평가를 위하여 로봇 손의 운반 가능한 최대 중량과 로봇의 이동 가능한 경사 등을 테스트하였고, 시험 평가 결과는 목표한 대부분의 설계 사양을 만족하였다.

• 로봇학회논문지
• /
• 제5권4호
• /
• pp.349-358
• /
• 2010

We presents a dynamic modeling of 4-wheel 2-DOF. WMR. The classic dynamic model utilizes a greatly simplified wheel motion representation and using of a simplified dynamic model confronts with a problem for accurate position control of wheeled mobile robot. In this paper, we treats the dynamic model for describes relationship between the wheel actuator force/torque and WMR motion through the use of Newton's equilibrium laws. To calculate the WMR position in real time, we introduced the Dead-Reckoning algorithms and the simulation result show that the proposed dynamic model is useful. We can be easily extend the proposed WMR model to mobile robot of similar type and this type of methodology is useful to analyze, design and control any kinds of rolling robots.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.19-24
• /
• 1992

Real-time mobile robot controllers usually have been designed with an emphasis on control theory ignoring the importance of system integration. This paper demonstrates that useful mobile robots require a real time controller with a wide range of capabilities in addition to control theory. These capabilities include: path-planning, position estimation, path tracking control and wheel control. An architectural framework supporting these capabilities has been designed and implemented. Using this frame work, individual modules such as a path planner, a path tracking controller, position estimators, wheel controllers and other cruical elements have been successfully integrated into the control system for the LCAR robot which was developed as a proto-type mobile robot in our laboratory. The context of the research, the architecture, its implementation and performance results from experiments are discussed.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제12권2호
• /
• pp.154-161
• /
• 2012

This article presents experimental studies of fuzzy logic application to control a two-wheel mobile robot(TWMR) system. The TWMR system is composed of two systems, an inverted pendulum system and a mobile robot system. Although linear controllers can stabilize the TWMR, fuzzy controllers are expected to have robustness to uncertainties so that the resulting performances are expected to be better. Nominal fuzzy rules are used to control balance and position of TWMR. Fuzzy logic is embedded on a DSP chip to control the TWMR. Balancing performances of the PID controller and the fuzzy controller under disturbances are compared through extensive experimental studies.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.440-447
• /
• 2018

Double parking is very common in a parking lot where there is not sufficient parking space. When we double-park a car, we leave transmission gear in neutral position and release the emergency brake so that the double-parked car can be moved just by pushing it. However, moving a double-parked car by pushing is very hard and dangerous especially for the old and the weak. So, we propose an omni-directional mobile robot for moving a double-parked car easily and safely. The developed omni-directional mobile robot moves a double-parked car by rotating a wheel of a double-parked car. It has two specially designed rollers to rotate a wheel of a double-parked car and is designed so that the height of the robot is very low to be able to enter beneath a double-parked car. It can move a double-parked car safely by detecting obstacles in the way with five ultrasonic sensors. We verified by several experiments that the developed omni-directional mobile robot can be used to move a double-parked car easily and safely.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2393-2395
• /
• 2001

The mobile robot is used as an instrument of transportation in automated plant. But the greater part of the moving method is the wheel-type. The wheel-type robot is easier control than the track-type, However the track-type is better than the wheel-type in bad landform(bend landform, an incline plane, stairs). In this paper, we propose the navigation algorithm of track-type robot in order to improve a defect of wheel-type. We experiment in bend landfrom and even ground to differentiate the navigation method. To estimate robot pose, we use the 80196 in a close distance and the vision-board in a long distance. Each data is managed in main PC and then the part of managing correspond to every sensor. We also use twelve supersonic wave-sensors to recognize external surroundings. As the result of experiment, we analyze the algorithm of control and make possible surroundings-adaptation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.740-743
• /
• 2005

Most works of the large vertical ceiling structures have been performed by human manually. These works require much more operation costs, labors and times, etc. Beside most people avoid this works because of it's characteristic such as danger, dirty and difficulty. So necessity of automation for these works has been rising. This automation needs a wall climbing mobile vehicle because of the movement of platform large workspace. In this study, we aim at develop the wheel which can be used for vertical wall-climbing mobile robot using electromagnet wheel. The wheel proposed can be available for several working processes on structures which consist magnetic substance.

• 융합신호처리학회논문지
• /
• 제7권4호
• /
• pp.214-220
• /
• 2006

This paper presents the systematic isotropy analysis of a fully actuated caster wheeled omnidirectional mobile robot (COMR) with the steering link offset different from the wheel radius, which can be considered as the generalization of the previous analysis. First with the characteristic length introduced, the kinematic model of a COMR is obtained based on the orthogonal decomposition of the wheel velocities. Second, the necessary and sufficient conditions for the isotropy of a COMR are derived and examined to categorize there different groups, each of which can be dealt with in a similar way. Third, for each group, the isotropy conditions are further explored so as to identify four different sets of all possible isotropic configurations. Fourth, for each set the expressions of the isotropic characteristic length required for the isotropy of a COMR are elaborated.