• Korean Journal of Health Education and Promotion
• /
• v.26 no.1
• /
• pp.141-158
• /
• 2009

Community-Based Participatory Research(CBPR) has gained attention as a public health approach to develop community health interventions to address health disparities in recognition of the community relevance of specific health issues associated with social determinants of health. It emphasizes community involvement in equal partnership with researchers and public health professionals to address community-identified needs. The characteristics and principles of CBPR discussed in this paper highlight participatory nature, capacity development, partnership building, and process-orientation of CBPR. A 6-step process model for community empowerment is then introduced as a CBPR operationalization strategy. Mixed methods research approaches are valuable in CBPR as well as process evaluation. For the application of CBPR in Korean contexts, the Diffusion of Innovation theory is suggested as a theoretical framework for implementation. Building public health partnerships between public and private sectors to create partnership synergy is a necessary condition for successful CBPR for health promotion in Korea. Accompanying critical factors for the CBPR application include: common understanding of CBPR and its values, establishment of the definition of 'community,' 'community-based' and 'participation' in community health, development of accommodating research infrastructure for CBPR, recognition of the importance of program evaluation (particularly process evaluation), and training CBPR specialists.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.4
• /
• pp.451-459
• /
• 2012

At the Korea Land and Housing Corporation(LH), concretes with high design strength of 50 MPa and 80 MPa that are composed only of ordinary Portland cement, blast furnace slag, and fly ash are developed. To determine whether the developed high strength concretes have the same properties when they are produced in batch plant(B/P) condition in the ready mixed concrete plant, and as existing high strength concretes, field tests are performed and material properties are evaluated. To investigate the material properties of the high strength concretes before and after pumping, compressive strength, flowability, air content, hydration temperature, pumping and compactability are evaluated. In field tests, before and after pumping, flowability satisfied the relevant criteria. In terms of air content, while it was slightly decreased after pumping, it satisfied the requirements. Hydration temperature criteria were satisfied, and compactability was excellent as well. The study found that the developed ternary high strength concretes have the same properties as existing high strength concretes. They can also be useful for the construction of high-rise buildings, as they are economical.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.3
• /
• pp.247-252
• /
• 1990

Nine Holstein cows in mid lactation period were utilized to examine the effect of recombinant bovine somatotropin (BST) of tow companies (Company A, Company B) on milk production and milk composition under the feeding conditions of Korea. Treatments were 0 (Control), 25 mg BST/day from company A (BST A) and 25 mg BST/day from company B (BST B) injected subcutaneously, once daily beginning at $200{\pm}20$ days postpartum and continuing for 28 days. Cows were fed ad libitum a total mixed diet throughout the experimental period. BST treatments increased average 4% fat corrected milk yields and milk energy output over the 28-day treatment period. However, no differences were observed in dry matter intake, gross efficiency, energy intake and percent milk energy. Although there was a tendency for increased milk fat percent, there were no differences in milk composition and yields of major milk components except for milk fat yield with BST injection. Somatic cells of all groups were also characteristic of a well managed herd. Neither mean body condition score nor body weight was significantly (p <0.05) changed before and during BST treatment. BST concentration in milk remained in the range of control animals throughout the experimental period of BST treatment. Results indicate that short-term injection of recombinant bovine somatotropin from two companies to lactating dairy cow resulted in similar increased in milk yield without alteration of major milk components or feed intake.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.230-236
• /
• 2001

We developed a built-in sensor bearing to measure the rotor motion of a rolling piston type compressor for the air conditioner. Because of needs for the high efficiency and long life span of compressor, and the usage of alternative refrigerants, the operating condition of the compressor becomes more severe. The accurate measurement of the rotor motion of the compressor can contribute greatly to the design and analysis of the hydrodynamic bearing. However, it is difficult to measure accurately the shaft behavior of small compressor because of the small space for the sensor mount, high temperature and pressure of compressor, oil mixed with refrigerant, and electromagnetic noise of the motor. To overcome these difficulties, we develop the cylindrical capacitive sensor that is built in the hydrodynamic bearing and calibrate the built-in sensor bearing indirectly through measuring the oil relative permittivity. We measured the rotor motion as well as suction and discharge pressures in various conditions. The several experimental results show that the developed built-in sensor bearing can measure the rotor motion not only in steady state but also in transient state.

• Transactions of Materials Processing
• /
• v.19 no.5
• /
• pp.277-282
• /
• 2010

Magnesium alloy has been known as lightweight material in automobile and electronic industry with aluminum alloy, titanium alloy and plastic material. Friction welding is useful to join various metals and nonferrous metals that are difficult to join by such as gas welding, resistance welding and electronic beam welding. In this study, friction joining was performed to investigate mechanical properties of Mg alloy with 20mm diameter solid bar. Also the optimal joining conditions for its application were determined on the basis of tensile test, and hardness survey. The joining parameters were chosen as heating pressure, heating time, upsetting pressure, and upsetting time. Heating and upsetting pressure were executed under the range of 10~40MPa and 20~80MPa, respectively. From the experimental results, optimal joining conditions were determined as follows; rotating speed=2000rpm, heating pressure=35MPa, upsetting pressure=70MPa, heating time=1sec, upsetting time=5sec. Also the hardness of jointed boundary showed as HV50 which was similar to that of base metal at the optimal condition, and it was supposed that zone of HAZ was 8mm. Finally two materials were strongly mixed at interface part to show a well-combined microstructure without particle growth or any defect.

• Korean Journal of Materials Research
• /
• v.14 no.12
• /
• pp.889-892
• /
• 2004

The synthesis of $Zn_{2}SiO_4:Mn^{2+}$ for PDP green phosphor by SHS(Self-propagating High temperature Synthesis method) was studied. The precursors were well mixed and cold compacted. And then, the green pellet was synthesized at high temperature through self-propagating high temperature zone. Because this reaction uses the heat resulted from the oxidation of Zn metal powder in this system, Zn/ZnO mole ratio is one of the most important reaction variable. Throughout several experiments, the optimal condition of Zn/ZnO mole ratio and Mn concentration are 1.2/0.8 and 0.05mo1e, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4432-4450
• /
• 2014

It is widely observed that in practical wireless cooperative communication systems, different links may experience different fading characteristics. In this paper, we investigate into the outage probability and channel capacity of two-way amplify-and-forward (TWAF) relaying systems operating over a mixed asymmetric Rician and Rayleigh fading scenario, with different amplification policies (AP) adopted at the relay, respectively. As TWAF relay network carries concurrent traffics towards two opposite directions, both end-to-end and overall performance metrics were considered. In detail, both uniform exact expressions and simplified asymptotic expressions for the end-to-end outage probability (OP) were presented, based on which the system overall OP was studied under the condition of the two source nodes having non-identical traffic requirements. Furthermore, exact expressions for tight lower bounds as well as high SNR approximations of channel capacity of the considered scenario were presented. For both OP and channel capacity, with different APs, effective power allocation (PA) schemes under different constraints were given to optimize the system performance. Extensive simulations were carried out to verify the analytical results and to demonstrate the impact of channel asymmetry on the system performance.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.4
• /
• pp.380-387
• /
• 2015

Various forms of passive shock absorber have developed to supplement performance which is poorer than that of active shock absorber. It is called 'Hybrid Conventional Damper (HCD)'. Frequency sensing shock absorber that this study will cover belongs to the HCD. This study aims to demonstrate that performance of frequency sensing shock absorber is superior than that of passive shock absorber. Study process is as follows. Firstly, analysis models for both passive shock absorber and frequency sensing shock absorber are developed to secure reliability. Then, elements which cause difference of ride quality are found out through comparison of hysteresis characteristics. By comparison of frequency characteristic, furthermore, damping principle of frequency sensing shock absorber is understood. Also, it determines if the absorber performs well even though maximum excitation speed is changed. Finally, the study proves that performance of frequency sensing shock absorber is superior than that of passive shock absorber after comparing change of damping power in excitation condition that various frequencies are mixed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.9
• /
• pp.361-366
• /
• 2016

As an alternative of well-mixed storage tank with lower coil only, we have proposed a tank with lower and upper coils and verified a superior thermal stratification in a tank, which results in increased collector efficiency and solar fraction. But the phenomenon of temperature reversal was often experimentally observed in the tank, so a revised control was successfully applied which is to heat only lower coil using three way valve if temperature reversal occurs and to operate the collector with low flow rate when the condition of solar radiation is not good. In the present study, using TRNSYS we compared the existing lower heating and the proposed lower and upper heating with a control preventing temperature reversal. The results showed that the proposed method has an increase of collector efficiency by 5.1% and solar fraction by 3.2%.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.2
• /
• pp.55-69
• /
• 1996

Backwashing is one of the most important processes in water treatment. Several models have been utilized to predict minimum fluidization velocity and expansion of media. However, it is not unusual that the actual bahavior of media dose not agree well with the prediction. This study has investigated the applicability of models in predicting the minimum fluidization velocity of sand media. However even the better model has predicted minimum fluidization velocity 1.1 to 1.8 times higher than actual fluidization velocity. The expansion rate of sand media was inspected. It is found that the actual expansion rate was greater than the predicted. In this study condition, use of $d_{10}$ instead of $d_{60}$ was better to predict the expansion of media. On the contrary to the sand media, the actual expansion of anthracite media was less than that predicted. Sometimes it is reported that the dual media has been overflown during backwashing and mixed severely at the interface. It is because the grain size distribution of anthracite has not been selected properly. The numerical values for media expansion found in this study could be referred as the useful data in operating and/or designing filter media.