• Journal of Welding and Joining
• /
• 제19권2호
• /
• pp.208-214
• /
• 2001

In this study, we constructed a visual sensor system for weld seam tracking in real time in GMA welding. A sensor part consists of a CCD camera, a band-pass filter, a diode laser system with a cylindrical lens, and a vision board for inter frame process. We used a commercialized robot system which includes a GMA welding machine. To extract the weld seam we used a inter frame process in vision board from that we could remove the noise due to the spatters and fume in the image. Since the image was very reasonable by using the inter frame p개cess, we could use the simplest way to extract the weld seam from the image, such as first differential and central difference method. Also we used a moving average method to the successive position data or weld seam for reducing the data fluctuation. In experiment the developed robot system with visual sensor could be able to track a most popular weld seam. such as a fillet-joint, a V-groove, and a lap-joint of which weld seam include planar and height directional variation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1190-1199
• /
• 2014

As a considerable, experimental approach, an autocarriage type of $CO_2$ welding machine and a MIG(metal inert gas) welding robot in the inert gas atmosphere were utilized in order to realize Al 5083 welding to hull and relevant components of green leisure ships. This study aims at investigating the effect of welding conditions(current, voltage, welding speed, etc.) on thermal deformation that occurs as welding operation and tensile characteristics after welding, by using Al 5083, nonferrous material, applied to manufacturing of eco-environmental leisure ships. With respect to welding condition to minimize the thermal deformation, 150 A and 16 V at the wire-feed rate of 6 mm/sec were acquired in the process of welding Al 5083 through an auto carriage type of $CO_2$ welding feeder. As to tensile characteristics of Al 5083 welding through a MIG welding robot, most of tensile specimens showed the fracture behavior on HAZ(heat affected zone) located at the area joined with weld metal, except for some cases. Especially, for the case of the Al specimen with 5 mm thickness, 284.62 MPa of tensile strength and 11.41 % of elongation were obtained as an actual allowable tensile stress-strain value. Mostly, after acquiring the optimum welding condition, the relevant welding data and technical requirements might be provided for actual welding operation site and welding procedure specification (WPS).

• 한국정보통신학회논문지
• /
• 제6권8호
• /
• pp.1374-1380
• /
• 2002

용접을 하는데 있어서 보다 균일한 용접상태를 유지하고, 용접품질의 향상 및 동일시간에 보다 많은 용접을 함으로써 생산성 향상을 위해 로봇의 이용이 점차로 증가하고 있다. 로봇용접의 과정 중 실제 용접을 실시하기 위해 로봇을 움직이기 이전에 용접할 부위의 검출이 선행되어야 하고, 그 검출방법에 있어서 크게 접촉식과 비접촉식의 센서가 활용이 되고 있다. 본 논문에서는 비접촉식 중 비전센서인 레이저 다이오드와 CCD 카메라를 이용하여 CCD 카메라를 거친 영상을 처리하여 용접선을 추적하고 용접을 하도록 하고 있다. 레이저 다이오드를 용접모재와 일정 각도를 가지도록 조사하게 되면 모재표면의 형상에 따라 반사되는 굴곡면이 달라지게 되는데 이 형상이 CCD 카메라를 통해 입력되고, 이 입력된 화상을 이미지 보드와 프로그램을 통하여 분석을 하고, 얻어진 용접선의 화상의 좌표 값을 토대로 로봇을 이동시킴으로써 용접을 하도록 하고 있다. 용접은 실시간으로 이루어짐으로써 생산성 향상에 크게 기여할 수 있다. 또한 모재에 따라 굴곡이 다른 1차원 평면의 용접인 경우는 약간의 프로그램 수정으로 대부분 추적 가능하다는 것을 확인할 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.460-464
• /
• 2001

최근, 아크용접을 하는데 있어서 보다 균일한 용접상태와 용접품질의 향상 및 동일시간에 보다 많은 용접을 함으로써 생산성 향상을 위해 로봇의 이용이 점차로 증가하고 있다. 로봇용접의 과정 중 실제 용접을 실시하기 위해 로봇을 움직이기 이전에 용접할 부위의 검출이 선행되어야 하고, 그 검출방법에 있어서 크게 접촉식과 비접촉식으로 대별된다. 본 논문에서는 비접촉식 중 영상처리센서인 레이저 다이오드와 CCD 카메라를 이용하여 CCD 카메라를 거친 영상을 처리하여 용접선을 추적하고 용접을 하도록 하고 있다. 레이저 다이오드를 용접모재와 어떤 각도를 가지도록 조사하게 되면 모재표면의 형상에 따라 반사되는 굴곡면이 달라지게 되는데 이 형상이 CCD 카메라를 통해 입력되고, 이 입력된 화상을 이미지 보드와 프로그램을 통하여 분석을 하고, 얻어진 용접선의 화상의 좌표 값을 토대로 로봇을 이동시킴으로써 용접을 하도록 하고 있다. 용접은 실시간으로 이루어짐으로써 생산성 향상에 크게 기여할 수 있다. 또한 모재에 따라 굴곡이 다른 1차원 평면의 용접인 경우는 약간의 프로그램 수정으로 대부분 추적 가능하다.

• 대한조선학회논문집
• /
• 제51권6호
• /
• pp.548-555
• /
• 2014

As a considerable, experimental approach, an Auto-carriage type of $CO_2$ welding machine and a MIG(Metal Inert Gas) welding robot under inert gas atmosphere were utilized in order to realize Al 5083 welding applied to hull and relevant components of green Al leisure ships. This study aims at investigating the effect of welding conditions(current, voltage, welding speed, etc) on thermal deformation that occurs as welding operation and tensile characteristics after welding, by using Al 5083, non-ferrous material, applied to manufacturing of co-environmental Al leisure ships. With respect to welding condition to minimize the thermal deformation, 150A and 16V at the wire-feed rate of 6mm/sec were acquired in the process of welding Al 5083 through an auto carriage type of $CO_2$ welding feeder. As to tensile characteristics of Al 5083 welding through a MIG welding robot, most of tensile specimens showed the fracture behavior on HAZ(Heat Affected Zone) located at the area joined with weld metal, except for some cases. Especially, for the case of the Al specimen with 5mm thickness, 284.62MPa of tensile strength and 11.41% of elongation were obtained as an actual allowable tensile stress-strain value. Mostly, after acquiring the optimum welding condition, the relevant welding data and technical requirements might be provided for actual welding operation site and welding procedure specification(WPS).

• 전자공학회논문지
• /
• 제49권9호
• /
• pp.307-313
• /
• 2012

본 논문은 자동 로봇 용접을 위한 Hand-Eye 레이저 거리 측정기 기반 용접 평면 인식 기법을 제안한다. 로봇 용접은 대상체의 형상에 의해 미리 정의된 용접선을 따라 금속 대상체를 용접 평면에 접합하는 과정이다. 따라서 성공적인 로봇 용접을 위해서는 용접 평면의 위치와 방향을 정확히 검출해야 한다. 만약 평면의 위치와 방향을 정확히 검출하지 못한다면 자동 로봇 용접은 실패하게 된다. 정밀한 용접 평면 인식을 위해 레이저 거리 측정기를 이용해 평면상의 직선을 검출한다. 레이저 거리측정기에 의한 직선 검출을 위해 Hough 변환을 적용한다. Hough 변환은 투표 방법을 기반으로 하기 때문에 센서의 측정 오차를 줄일 수 있다. 이 때 레이저 거리 측정기가 부착된 로봇 관절을 회전시켜 평면상의 두 개의 직선을 검출한 후 두 직선의 방향 벡터에 외적을 취해 평면의 방향을 인식한다. 제안된 방법의 실효성을 검증하기 위해 Simlab사에서 개발한 로봇 시뮬레이터인 RoboticsLab을 이용해 시뮬레이션을 수행한다.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.37-42
• /
• 2007

The purpose of this research is stability estimation of plant structure through classification and recognition about welding flaw in SWP(Spiral Welding Pipe). And, In this research, we used nondestructive test based on ultrasonic test as inspection method, and made up 2-axes inspection robot in order to control of ultrasonic probe on the SWP surface, and programmed to image processing and probabilistic neural network(PNN) classifying code by MATLAB programming. Through this process, we proved efficiency on the system of SWP stability Estimation.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2005년도 추계학술발표대회 논문집
• /
• pp.50-56
• /
• 2005

The robot systems are widely used in the many industrial field as well as welding manufacturing. The essential tasks to operate the welding robot are the acquisition of the position and/or shape of the parent metal. For the seam tracking or the robot tracking, many kinds of contact and non-contact sensors are used. Recently, the vision is most popular. In this paper, the development of the system which measures the shape of the welding part is described. This system uses the line-type structured laser diode and the vision sensor. It includes the correction of radial distortion which is often found in the image taken by the camera with short focal length. The Direct Linear Transformation (DLT) method is used for the camera calibration. The three dimensional shape of the parent metal is obtained after simple linear transformation. Some demos are shown to describe the performance of the developed system.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2003년도 추계학술대회 및 정기총회
• /
• pp.185-192
• /
• 2003

Digital Manufacturing-based production could be very effective in shipbuilding in order to save costs and time, to increase safety for workers, and to prevent bottleneck processes in advance. Digital shipbuilding system, a simulation-based production tool, is being developed to achieve such aspects in Korea. To simulate material flow in a subassembly line at a shipyard, the product, process and resources was modeled for the subassembly process which consisted of several sub-processes such as tack welding, piece alignment, tack welding, and robot welding processes. The analysis and modeling were carried out by using the UML(Unified Modeling Language), an object-oriented modeling method as well as IDEF(Integration DEFinition), a functional modeling tool. Initially, the characteristics of the shop resources were analyzed using the shipyard data, and the layout of the subassembly line was designed with the resources. The production process modeling of the subassembly lines was performed using the discrete event simulation method. Using the constructed resource and process model, the productivity and efficiency of the line were investigated. The number of workers and the variations In the resource performance such as that of a new welding robot were examined to simulate the changes in productivity. The bottleneck process floated according to the performance of the new resources. The proposed model was viewed three-dimensionally in a digital environment so that interferences among objects and space allocations for the resources could be easily investigated

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.517-517
• /
• 2000

Welding automation is one of the most important manufacturing issues in shipbuilding in order to lower the cost, increase the quality, and avoid the labor problems. Generally the on-line teaching is utilized on the robot that is used in the welding automation system, but it requires much effort and long time to program. Especially, if the system is composed of more than two cooperating robots, it demands much more skill to program the robots' motion. Thus, a convenient programming tool is required for efficient utilization of welding automation system. In this study, a convenient programming tool is developed for welding automation in which gantry-robot system is used. The system is composed of a gantry transporter and two robots mounted on the gantry to cover the wide work range in the ship building application. As a programming tool, an off-line programming software based on PC is developed. By using this software, field operator does not need to concern about coding of task programs for three control units, one is for gantry and two are for robots. The task programs are automatically generated by assembling the program modules in database according to geometrical information of workpiece and welding condition, which become the only concern of field operator, The feasibility of the generated programs can be verified via a motion simulator previously to on-line running.