• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.249-254
• /
• 2017

This paper presents an assessment system of safety level of 22.9kV grade high voltage electrical facilities considering environmental factors. The assessment system was developed based on the following procedure. Firstly, assessment structure was determined by consulting standards regarding inspection and diagnosis of electrical facilities. Secondly, contents of items and sub items of assessment system were developed. Thirdly, in order to quantify the importance of the assessment system, the weight was calculated using Analytic Hierarchy Process(AHP). Lastly, assessment table of safety level was developed including environmental factors such as period of use and load factor. The developed system can evaluate the safety level of high voltage facilities in an objective way. Therefore it can be applicable to electrical safety management system based on Internet of Things(IoT).

• Journal of Information Processing Systems
• /
• v.1 no.1 s.1
• /
• pp.79-85
• /
• 2005

In this paper, we dealt with substantial asset analysis methodology applied to two-dimensional asset classification and qualitative evaluation method according to the business process. Most of the existent risk analysis methodology and tools presented classification by asset type and physical evaluation by a quantitative method. We focused our research on qualitative evaluation with 2-dimensional asset classification. It converts from quantitative asset value with purchase cost, recovery and exchange cost, etc. to qualitative evaluation considering specific factors related to the business process. In the first phase, we classified the IT assets into tangible and intangible assets, including human and information data asset, and evaluated their value. Then, we converted the quantitative asset value to the qualitative asset value using a conversion standard table. In the second phase, we reclassified the assets using 2-dimensional classification factors reflecting the business process, and applied weight to the first evaluation results. This method is to consider the organization characteristics, IT asset structure scheme and business process. Therefore, we can evaluate the concrete and substantial asset value corresponding to the organization business process, even if they are the same asset type.

• Journal of Chest Surgery
• /
• v.1 no.1
• /
• pp.53-60
• /
• 1968

Achalasia is a functional disorder of a short segment of the lower esophagus showing obstruction of the esophagogastric junction. Dysphagia. regurgitation and weight loss are outstanding features,however, complicated pulmonary troubles aspiration pneumonitis, bronchiectasis, lung abscess etc. --are sometimes more apparent than the disease entity in children though achalasia is rarely encountered in children. During the period of January, 1961, to May, 1968, the authors experienced 9 cases of achalasia of the esophagus in Chest Surgery Department,N.M.C. 1. Seven of nine were male and four were under 5 years of age. 2. So-called symptoms triad noted in almost every case, and 3 of 4 children showed recurrent attacks of pneumonitis. 3. Chest film showed widened superior mediastinum by dilated esophagus in 6 cases, and pulmonary infiltrations in 3 cases of children. 4. Preoperative diagnosis were achalasia,esophageal stricture by rodent-cidal ingestion and suggestive esophageal cancer in 7 cases,one case and remaining one case. respectively. 5. Modified Heller procedure was performed in all cases with definite diagnosis of achalasia at operation table in misdiagnosed 2 cases. 6. Immediate postoperative complications were 2 cases of wound infection and one case of atelectasis and no operative mortality encountered. 7. Seven of nine showed excellent result of operation, and good in one case. Remaining one case failed relieving obstruction and underwent interposition of ileocolonic segment with excellent result.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.1059-1063
• /
• 2005

Development of a feed drive-system with high speed, positioning accuracy and thrust has been an important issue in modern automation systems and machine tools. Linear motors can be used as an efficient system to achieve such technical demands. By eliminating mechanical transmission mechanisms such as ball screw or rack-pinion, much higher speeds and greater acceleration can be achieved without backlash or excessive friction. However, due to great power loss and magnetic attraction of the linear motors heating and deflection problems occur. Therefore, it is necessary to design strong structure, cooling device with high efficiency and light weight construction in designing stage of linear motors. This paper presents an investigation into a structural design of linear motor system. In this research, a new concept of moving table with high stiffness and of cooling plate is also introduced. Structure analyses are performed by using a commercial code ANSYS in order to evaluate the design safety.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.530-533
• /
• 2005

Recently, modern reciprocating air compressors tend to be smaller and lighter. But, as the development of performance, they have many problems for noise and vibration. For this reason, many researches are processing for the reduction of noise and vibration by arranging cylinders with V/W type. Especially, noise and vibration problems of reciprocating air compressor cause a rotating unbalance of crankshaft, so it needs a change of crankshaft parameters appropriately. Hence in this study, we changed crankshaft parameters to solve the rotating unbalance and compared results in order to verify the noise and vibration reduction between new and original air compressor. According to modify a crankshaft parameter, the improvements of noise and vibration were showed results of spectrum measured at selected points of the air compressor crankshaft housing and sound intensity contours measured at a belt left side, table that figure out characteristics of noise. Furthermore, we analyzed objective sound quality metrics with recording data of systems. The results showed that, the new design has improved the level of the first harmonic of vibration displacement, noise and objective sound quality metrics.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.11
• /
• pp.856-863
• /
• 2002

Seismic qualification of the main control board(MCB) for the nuclear power plant Ulchin 5 and 6 has been performed with the guideline of ASME Section III and IEEE 344 code. As the size and weight of the MCB are too large and heavy to excite using the excitation table, finite element analysis is used in order to investigate the dynamic behaviors and structural integrity of the MCB. As the fundamental frequencies of the equipment are found to be less than 33 Hz, which is the upper frequency limit for the dynamic analysis, response spectrum analysis using ANSYS is performed in order to combine the modal stresses within the frequency limit. In order to confirm the electrical stability of the major components of the MCB. modal analysis theory has been adopted to derive the required response spectra at the component locations. As the all combined stresses obtained from the above procedures are less than the allowable stresses and no mechanical or electrical failures are found from the seismic testing, the authors can confirm the safety of the nuclear equipment MCB under the given seismic loading conditions.

• Korean journal of food and cookery science
• /
• v.24 no.5
• /
• pp.580-592
• /
• 2008

The principal objective of this study was to develop a standardized recipe for the large-scale production of Bibimbab, bean sprout bab, and fried rice. The recipe was standardized as follows. We collected and recorded the quantities of ingredients and production procedures currently used by cooks in the contracted foodservice management company and in hotel-based Korean restaurants. According to the food preferences of Koreans, we selected 3 rices; Bibimbab, bean sprout bab, and fried rice. We then developed a revised recipe and evaluation form. Our sensory evaluation was conducted by 30 taste panels using a JAR(just- about-right) scale. We developed a standardized recipe for 3 rices. Yield, portion size, temperature, preparation time, equipment, cost, ingredients, weight of ingredients, method, and critical point were recorded in the developed recipe. We utilized the factor method and the percentage method for recipe adjustments, and we devised a direct measurement table for Bibimbab, bean sprout bab, and fried rice.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.97-104
• /
• 2006

The centrifuge and 1-g shaking table tests were performed simultaneously to compare the dynamic behaviors of loose sands of same geotechnical properties. The prototype soils were 10 m thick liquefiable loose sands. The geometric scaling factors were 20 for 1-g and 40 for centrifuge tests. The excess pore pressure, surface settlement, and acceleration in the soil were measured at the same locations in the 1-g and centrifuge tests. The total excess pore pressure from development to dissipation was measured. In the centrifuge test, viscous fluid was used as the pore water to eliminate the time scaling difference between dynamic time and dissipation time. In the 1-g tests, the steady state concept was applied to determine the unit weight of the model soil, and two different time scaling factors were applied for the dynamic time and the dissipationtime. It is concluded that the 1-g tests can simulate the excess pore pressure of the prototype soil if the permeability of the model soil is small enough to prevent dissipation of excess pore pressure during shaking and the dissipation time scaling factor is properly determined.

• YAKHAK HOEJI
• /
• v.5 no.1
• /
• pp.10-15
• /
• 1960

In order to know the effect on the growth of experimental rats, this, this experimental rats, this experiment was carried out on two groups of rats-a rice-diet animal group and a stock-diet animal group. Results of the growth experiment are shown in the tables 3 and 4, and growth curves are shown in the figures 1 and 2. The growth curves are shown in the figures 3 and 4. Based on the statistical analysis of growth rats, the male group on stock-diet was stimulated significantly in its growth by adding antler. The female group on rice-diet was also significantly stimulated in growth by anter. The other groups are not significant but it seems likely that the growths wers stimulated. As shown in table 7, the numbers of days when the body weight of the animals in each group became two times, three times, three times, and four times are discussed. This method of analysis shows clearly the stimulation of growth by adding antler in each group in both sexes. It can be summarized that the antler stimulates the growth of the experimental rats but it is not discussed in this paper whether this stimulation in the growth might be due to calcium, vitamins and amino acids in antler or to an unknown growth factor.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.212-217
• /
• 2010

A new waxy corn hybrid 'Daedukchal 1' was developed from single cross between CNU 504 and CNU 2396 at Chungnam National University in 2007. Inbred CNU 504 used as a seed parent and inbred CNU 2396 as a pollen parent were collected throughout domestic regions. Tasseling date of this hybrid was seven days later than that of check hybrid, 'Chalok 1'. 'Daedukchal 1' was 19.7 cm in ear length and 4.5 cm in ear diameter. On yield trial, ear length of this hybrid was increased 29.7% compared with a check hybrid, 'Chalok 1'. 'Daedukchal 1' had white kernels and good eating quality due to high sugar content and thinner pericarp. The ratio of kernel set length/ear length was similar to 'Chalok 1'. It is moderately resistant to southern leaf blight and northern leaf blight but susceptible to corn borer. The yields of 'Daedukchal 1' in fresh ear weight and in number of fresh ear were 16% and 8%, respectively, higher than those of a check hybrid in regional yield trials for two years. Seed production for this hybrid was better because of the consistency of tasseling dates.