• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.8
• /
• pp.1139-1148
• /
• 1999

This paper discussed the assessment of hand of denim fabrics finished by enzymatic hydrolysis. The semantic differential scale established using the database collected from university students. Analyzing the subjective rating by common factor analysis with oblimin rotation five factors expressing the hand were induced. Factor one was the surface property related to the surface roughness or softness Factor two was the durability which was related to the compactness and bearing strength Factor three was the sense of weight which was related to the thickness and weight. The moisture related properties and the sense of shape recovery were the forth and fifth factors respectively. the evaluations on the surface property weight and moisture related properties were similar by men and women However the shape recovery and the durability were evaluated differently. Surface and weight related properties were important factors judging the hand of fabrics by both group.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.3
• /
• pp.127-135
• /
• 1996

This study investigated the correlation of physique factor( standing height, body weight, chest girth, body surface ) and vital capacity upon records of swimming discipline at sea water. The subjects are 194 sophomore students of Korea Maritime University who participated in the swimming discipline. The swimming records were divided into three groups - higher, middle and lower group. The results from this investigation are as follow ; 1. The standing height was above the average on the A, B+ record, body weight was above on the A+, A record, and vital capacity was above on the A+, A, B+, C record respectively. 2. The standing height, body weight, chest girth, body surface, vital capacity was significantly correlated between record P < 0.05 and P < 0.01. Therefore the higher record group has better physique factor and vital capacity than the middle or lower record group. 3. The standing higher of the higher record group was significantly correlated with body weight(0.514), body surface(0.768) and vital capacity(0.427), and body weight was significantly correlated with chest girth(0.525), body surface(0.940) and vital capacity. This standing heiht of the middle record group was sigificantly correlated with body weight(0.509) and body surface(0.779), and body weight was significantly orrelated with chest grith(0.618) and body surface(0.927). The standing height of the lower record group was significantly correlated with body weight(0.595), chest grith(0.363), body surface(0.802) and vital capacity(0.250), and body weight was significantly correlated with chest grith(0.678) and body surface(0.952).

• Child Health Nursing Research
• /
• v.5 no.3
• /
• pp.250-261
• /
• 1999

This study has been conducted on the nonequivalent control group Pretest-posttest design in quasi experimental basis and newly born premature infants from intensive care unit of G Medical University Hospital in Inchon Metropolitan were selected in two groups of 21 infants each. The first group for experimental and the other for control. Data has been collected form October 30, 1997 to August 29, 1998. For the experimental group tactile and kinesthetic stimulation was applied 2 times a day for 10 days(10:00～ll:00 hours in the morning and 17:00～18:00 in the afternoon). As, a weight weighing instrument, electronic indicator scale(Cas Co. korea) was used. Collected data were analyzed with the SAS program using x²-test, student t-test, repeated measures ANOVA, Pearson correlated coefficient and Stepwise multiple regression. The result were as follow. 1. As for the daily weight gain, the experimental group showed first change in weight and this group also showed higher weight in the average weight than the control group. Statistically, however. there was no significant factor between the two groups. 2. In the correlation between general characteristics and weight gain, gestation Period. apgar score, admission Period before study, N.P.O. period after birth, recovery Period to birth weight showed statistical significance negative correlation with weight gam in the experimental group than control group. 3. In the factor with affected the weight gain by general characteristics showed recovery period to birth weight and head circumference in the experimental group, control group showed recovery period to birth weight, N. P. O. period after birth. admission period before study, feeding amount, weight of study. In conclusion. the sensory stimulation in this study showed a Positive aspect through there was no statistical significance in the weight gam. Tn the correlation of general characteristics and weight gam showed statistical significance negative correlation The main factor which affected the weight gain by general characteristics showed recover period to birth weight.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.149-156
• /
• 2012

In fracture mechanics, the weight function can be used for calculating stress intensity factors. In this paper, a two-dimensional electroelastic analysis is performed on a transversely isotropic piezoelectric material with an open crack. A plane strain formulation of the piezoelectric problem is solved within the Leknitskii formalism. Weight function theory is extended to piezoelectric materials. The stress intensity factors and electric displacement intensity factor are calculated by the weight function theory.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.3
• /
• pp.335-341
• /
• 2003

Carcass weight and backfat thickness are two of important elements in determining the carcass trait in pigs and are studied on animal genetics, nutrition, and endocrinology. Growth factors stimulate or inhibit the proliferation and differentiation of various cells. In particular, insulin-like growth factors (IGFs), transforming growth factor (TGF)-$\beta$, and epidermal growth factor (EGF) are involved in the growth and maintenance of muscle. Also, dehydroepiandrosterone-sulfate (DHEA-S) and cortisol are known to be related to the obesity and subcutaneous fat depth in pigs. Therefore, this study was performed to relate growth factors (IGFs, TGF-${\beta}1$, and EGF) and hormones (cortisol and DHEA-S) concentrations at antemortem and postmortem periods to carcass traits including carcass weight and backfat thickness. Blood and m. Longissimus were collected in pigs at antemortem (30 days before slaughter) and postmortem periods. After slaughtered, carcass weight and backfat thickness were measured. Growth factors and hormones in serum and m. Longissimus were measured by radioimmunoassay or enzyme-linked imuunosorbent assay. Before antemortem period, serum IGF-I and -II concentrations were positively correlated with the carcass weight and backfat thickness in gilts, and the concentrations of TGF- ${\beta}1$ and cortisol in barrows show the correlation with only carcass weight. Also, the positive correlations of muscular IGFs and TGF-${\beta}1$ at postmortem 45 min with the carcass weight and backfat thickness were detected. Consequently, these results suggest that the serum and muscular endocrine factors are involved in the carcass weight and backfat thickness in pigs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.51-55
• /
• 2007

In this paper Statistical Energy Analysis has been considered to predict high frequency air borne interior noise. Dash panel Insulation is major part to reduce engine excitation noise. Transmission loss and absorption coefficient are considered to predict dash insulation performance. Transmission lose is derived from coupling loss factor and absorption coefficient is derived from internal damping loss factor. Material Biot properties were used to calculate each loss factors. Insulation geometry thickness distribution was hard to measure, so FeGate software was used to calculate thickness map from CAD drawing. Each predicted transmission losses between conventional insulation and light weight insulation were compared with SEA. Transmission loss measurement was performed to validate each prediction result, and it showed good correlation between prediction and measurement. Finally interior noise prediction was performed and result showed light weight insulation system can reduce 40% weight to keep similar performance with conventional insulation system, even though light weigh insulation system has lower sound transmission loss and higher absorption coefficient than conventional system.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.5
• /
• pp.47-56
• /
• 2023

The Quercus variabilis and Quercus dentata, which are said to be relatively drought tolerant among the important genus Quercus that represent deciduous broad-leaved forests in Korea. These two species are widely distributed worldwide in Korea, Japan and China (northern, central, western and eastern subtropical regions). This study compared the ecological niche breadth and overlap according to growth response in 4 soil moisture gradients for the two species and tried to reveal degree of competition and ecological niche characteristics. The ecological niche breadth was 0.977±0.020 for Q. variabilis and 0.979±0.014 for Q. dentata, the latter being slightly wider. And they were similar in 5 traits (stem length, leaf lamina length, leaf width length, stem weight, leaf petiole weight), Q. variabilis was more dominant in 4 traits (leaves number, stem diameter, leaf area, leaf petiole length), and Q. dentata was more dominant in 7 traits (root length, shoot length, plant weight, root weight, shoot weight, leaf weight, leaf petiole weight). The ecological niche overlap for soil moisture between the two species overlapped most in plant structure-related traits and least in photosynthetic organ-related traits such as petiole length. As a result of principal component analysis, degree of competition between the two species for soil moisture was more severe when the soil moisture condition was low than high. Among the measured traits that affect the two-dimensional distribution, 8 traits (Leaves number, Shoot length, Stem length, Plant weight, Root weight, Shoot weight, Stem weight, Leaves weight) were correlated with the factor 1, and 2 traits (Leaf width length, Leaf petiole weight) were correlated with the factor 2 (r>0.5). These results show that the ecological response of the two species to soil moisture is not a few traits involved, but several traits are involved simultaneously.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.4
• /
• pp.199-205
• /
• 2018

Objective: The purpose of this study was to examine the effect of increase in barbell weight on closely related variable to the anterior cruciate ligament (ACL) injury which are knee joint kinematics, joint load, joint moment, and maximum load attainment point during snatch of the weight lifting. Method: The subjects of the study were 10 male Korean national weight lifting athletes (69 kg 5, 77 kg 5; age: $21.80{\pm}3.91yrs.$, height: $168.00{\pm}4.06cm$, weight: $75.00{\pm}4.02kg$, career: $7.8{\pm}3.99yrs.$, snatch records: $168{\pm}4.06kg$). The weight of the barbell during the snatch operation was set at 70%, 75% and 80% of the highest records for each subject studied. Results: The result obtained from the one-way repeated measure ANOVA are as follows: With increased barbell weight, the extension moment of the left knee joint was higher in the 80% condition than the 70% (p<.001). However, other variables were not statistically significant difference. According to the factor analysis of the variables related to maximum load attainment point of the ACL major injury variables, the first sub-factor was the internal shear force, the posterior shear force, the abduction moment, and the muscle activity of the VL. The second sub-factor was the extension moment of the knee joint, compressive force, adduction moment, and the third sub-factor was the muscle activity of BF. Conclusion: These results indicate that the possibility of ACL injury can be lowered when performing a stable snatch movement.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.2
• /
• pp.277-285
• /
• 2000

The purpose of this study was to quantify the relationship between the sense of touch and mechanical properties of man-made leather. The first was to develop the five conversion equations which convert mechanical properties of man-made leather into five factor scores, which express five factors of the sense of touch(surface property, stretchiness, thickness & weight, thermal property(warmth & coolness), and moisture property(sticky & clingy)). The second was to develop the conversion equation which converts five factor scores into score of the sense of touch. Five factor scores were predicted by the following mechanical properties; surface property factor by log2HB and (log2HB)2, stretchiness factor by logEM, thickness & weight factor by logT, log2HB, logW, thermal property factor by logT, logHB, logSMd, and moisture property factor by logMMD, RC, RC2, (logEM)2, RT2. Subsequently, these five factor scores were converted into score of the sense of touch. The predictive abilities of the developed equations were satisfied.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.6 no.1
• /
• pp.3-12
• /
• 1988

The objective of this paper is to study the characteristics of combination method to correct both angle and distance errors simultaneously based on the least square adjustment methods. Changing the standard errors of distance and angle, the simulation errors of triangultion, trilateration, and combination result in some 39.8%, 33.9%, and 26.3% respectively. As the above, combination method shows more consistent accuracy than other methods. When considering the weight factor about error elements with independence, the diminishing rate of simulated average standard error represents a various change in each method. But considering them simultaneously, it shows a remarkable rate of diminishing 75.5%, 74.1%, and 69.2% in each method. And also, by growing the weight factor, accuracy of triangulation method is growing, whereas that of trilateration is diminishing. Therefore, determining the reasonable weight factors of distance and angle errors simultaneously in the analytical combination method, this method is expected to be one of more accurate and more effective methods for determining horizontal positions on the earth.