• 제목/요약/키워드: Wedge factor

검색결과 100건 처리시간 0.026초

Flexible Wedge Gate 밸브의 운전 성능향상 방안에 관한 연구 (A Study for the Improvement Method of Flexible Wedge Gate Valve Operation Capability)

  • 김대웅;이도환;강신철;김인환;박성근
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.644-651
    • /
    • 2001
  • The purpose of this study is to develop the improvement method of MOV(Motor Operated Valve) operability without major modification or change of MOV which needs a great expense and manpower. We studied valve stem lubrication, stem packing thrust and actuator control switch which could give an major effect to MOV operability, and found the some consequences. First, the stem/stem-nut friction coefficient and stem factor is significantly effected by stem lubrication state. Second, the measured packing thrust value is appeared higer than the design value for tested valves and the preparation of optimal value selection criteria is needed. Finally, optimization of MOV control switch is another major factor for MOV operability and structual integrity.

  • PDF

방사선 입체조형치료를 위한 동적쐐기여과판의 고안과 조직내 선량분포 특성 (Dose Distribution and Design of Dynamic Wedge Filter for 3D Conformal Radiotherapy)

  • 추성실
    • 한국의학물리학회지:의학물리
    • /
    • 제9권2호
    • /
    • pp.77-88
    • /
    • 1998
  • 쐐기형 선량분포는 임상에 많이 응용하고 있으며 고정쐐기여과판은 선질의 강화와 조사면 주위 의 산란선 증가, 등선량 각도의 불일치, 여과판의 장착 및 취급이 부정확하고 어려우며 입체조형 방사선 치료시 많은 조사면을 입체방향으로 중첩시킴으로서 발생되는 선량의 불균질을 방지하고 동적입체방사선조형치료(dynamic 3D conformal radiotherapy) 및 선량강도조절치료(intensity modulation radiotherapy)를 가능케 하는 동적쐐기여과판을 고안 제작한다. 동적쐐기여과판은 콜리메이터를 움직이면서 선량율을 변화시켜서 최적한 쐐기각의 등량곡선을 얻을 수 있도록 미분치료표(segmented treatment tables: STT) 유도하며 표준형의 STT를 컴퓨터에 입력시킨다. STT에 의하여 생성되는 동적쐐기여과판의 특성과 조직내 선량분포를 쐐기각, 조사변의 크기, 조사선량율둥 여러 조건하에서 측정 분석함으로서 방사선 감수성이 높은 장기 내의 종양과 저항성 이 강한 악성종양치료에 도움을 주며 전반적인 방사선치료 성과를 향상시키고자 한다. 연세암센터에서 가동되는 선형가속기 (Varian Clinac-2100C/D)를 이용하여 6MV 와 10MV 광자선과 쐐기각이 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$이고 정사각형 조사면의 한변이 4cm 부터 20cm 범위를 0.5cm 간격으로 콜리메이터를 움직이면서 선량 변동량을 표시하는 미분치료표 (STT)를 작성하였다. 쐐기투과선량인자 (wedge transmission factor) 는 표준 물팬텀내에 표준전리함을 장치하고 열린조사면과 미분치료표에 의한 쐐기조사면의 선량비료서 결정하였다. 쐐기여과판에 의한 조직내선량분포와 등량곡선 및 프로파일은 필름으로 측정하고 영상선량측정기로 작성하였다. 수식으로 유도한 미분치료표(segmented treatment tables: STT) 은 쐐기여과판의 쐐기각과 일치하였으며 쐐기투과선량인자는 쐬기각이 클수록 감소하였으며 조사변이 클수록 적어졌고 조사면 크기와의 관계는 비선형적이었다. 동적쐐기여과판에 의한 등량곡선의 쐐기 기울기는 고형여과판보다 더욱 일치된 경사각을 유지하였다. 심부선량백율은 열린조사면에 의한 것과 거의 비슷하였으며 고형쐐기여과판의 심부율보다 약간 줄어들었다. 동적쐐기여과판은 고형쐐기여과판보다 사용상, 선량측정 및 선량분포에 서 장점이 많으며 피부와 여과판사이의 길이가 길어서 침대에 부딪치는 일이 없고 피부의 산란선 오염이 감소되어 치료효과를 상승시킬 수 있다. 동적쐐기조사방법을 개발함으로서 지금까지 방사선 후유증과 종양의 불균일한 선량배열로 치료의 어려움이 있었던 분야를 개척할 수 있으며 동적입체 방사선조형치료 (dynamic 3D conformal radiotherapy) 및 선량강도조정치료 (intensity modulation radiotherapy)를 가능하게 함으로서 방사선치료성과를 향상시킬 수 있다.

  • PDF

A CASE STUDY ON OPEN PIT MINE ROCK SLOPE STABILITY

  • Um, Jeong-Gi
    • 대한지질공학회:학술대회논문집
    • /
    • 대한지질공학회 2002년도 정기총회 및 학술발표회
    • /
    • pp.109-114
    • /
    • 2002
  • Development of a three-dimensional mine visualization model for a section of the mine is addressed first. Discontinuity orientation and location information was taken from this visualization model for use in slope stability analyses. Estimated shear strength properties of discontinuities and mechanical properties of intact rock from the rock mass samples obtained from the mine are discussed next. The third part of the paper is focused on the results obtained for maximum safe slope angles for the section considered of the mine based on block theory analysis conducted under only the gravitational forces using the mapped discontinuities at the mine. Finally, the effects of water that exist in the rock mass, a tension crack, slope face inclination, overall wedge height and double benching on factor of safety of wedge stability are illustrated through limit equilibrium slope stability analyses conducted on a single tetrahedral wedge belonging to potential key block category that exist in the investigated area of the mine.

  • PDF

선형가속기의 동적쐐기(EDW) 작동에 대한 품질보증 (Quality Assurance of Operation of Enhanced Dynamic Wedges in Linac)

  • 정동혁;김진기;강정구;손광재;이정옥
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제33권2호
    • /
    • pp.133-141
    • /
    • 2010
  • 선형가속기의 동적쐐기(enhanced dynamic wedge: EDW)의 품질보증을 위하여 다양한 방법으로 동적쐐기의 특성을 평가하였다. 본 연구에서는 6 MV와 15 MV 엑스선에 대하여 각각 7종(10, 15, 20, 25, 30, 45, 60도)의 EDW를 평가하였다. EDW 작동에 필요한 STT(segmented treatment table)를 계산으로 구하고 로그파일을 통하여 기계적 작동을 평가하였으며, 이차원배열형검출기와 전리함을 사용하여 팬텀속 선량분포를 측정하고 치료계획시스템(RTP)과 비교하였다. EDW의 기계적 작동은 예상과 잘 일치하였으며, 빔측면도를 포함한 이차원선량분포는 근사적으로 RTP 계산과 일치하였다. 선형가속기 조사량 100 MU에 대한 출력선량은 RTP 계산과 2.9% 이내로 일치하였으며, 측정된 쐐기인자는 RTP 계산과 최대 2.6%를 보였다. 이 결과들은 본 선형가속기에 장착된 EDW의 임상적 적용에 문제가 없음을 의미한다.