• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.581-586
• /
• 2015

In this paper, we configure a Radio Frequency IDentification (RFID) gateway using an arduino and raspberry pi which are recent issues with a representative open source hardware. RFID technology is emerging as a key technology in a variety of environments as a technique to automatically identify objects using a radio frequency signal. In this paper, we propose a distributed RFID gateway for providing various communication methods and processing a large amount of RFID tag information efficiently, and to increase the scalability and middleware communication efficiency of the RFID reader. Existing RFID middleware systems have the problems that they should adhere the web service for interworking with a reader and the communication standard. Therefore, in this paper, we comprise our RFID gate to satisfy not only the serial communication configuration but also various digital signal processing standard so that it increases the communication efficiency of the middleware system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.239-249
• /
• 2003

A lot many WWW sites are come into the world more and more as Web is considered as the unified Internet information tool. The location of each site or resource is usually specified by a physical URL, which is often too long to remember and tends to raise difficulty to show the aim of the site intuitively by seeing it. Since any person or organization can get his/her own domain name easily, it is more desirable to use a logical URL with the domain name which can be chosen more compact to remember and meaningful to represent the ultimate intention of the site. This paper presents an implementation of a URL forwarding server which forwards a URL to another, so that a WWW site can use a logical URL instead of a physical one. The server consists of a domain mapper which uses the redirection transaction of the HTTP protocol, and a name server based on the HIND. The paper shows how the interaction between the domain mapper and the name sever can make forwarding possible and describes its implementation in detail. Experimental results shows that the overhead incurred by URL forwarding is negligible compared to the typical delay of current Internet traffic condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.752-758
• /
• 2012

SNS(Social Networking Services) is oneline service that enable users to construct human network through their relation on web, such as following relation, friend relation, and etc. Recently, owing to the advent of digital devices (smart phone, tablet PC) which embedded GPS some applications which provide services with spatial relevance and social relevance have been released. Such an online service is called LBSNS. It is required to use spatial filtering so as to build the LBSNS system that enable users to subscribe information of interesting area. For spatial filtering, user and tweet attaches location information which divide into static property presenting fixed area and dynamic property presenting user's area changed along the moving user. In the case of using a location information including dynamic property, Continuous query occurred from the moving user causes the problem in server. In this paper, we propose spatial filtering algorithm using Virtual Grid for reducing frequency of query, and conclude that frequency of query on using Virtual Grid is 93% decreased than frequency of query on not using Virtual Grid.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.4
• /
• pp.371-377
• /
• 2013

Fishing boats more than 5 tons is obliged to VHF DSC by Fishing Vessels Act and Vessel Safety Act. The owner of the fishing vessel is equipped to the automatic position reporting device in accordance with the Notice of the Minister of Land, Transport and Maritime Affairs to regulations, shall be ensure to navigations safety and in order to respond quickly in the event of maritime accidents on fishing vessels. East sea set up to start in 2012, which is now underway the annual install plain to the yellow sea and the south sea for VHF coast stations. It is web-based remote operation of DSC on the remote control and monitoring in Fishery Information Communication Station for the coastal VMS construction project. All fishing vessels is VHF DSC in conjunction with the GPS that location information transmitted to the coast station. automatically by the DSC call. This paper has been studied on the communications coverage set up and traffic operation for realization a roaming service by navigation route tracking and RSSI techniques in parallel algorithm refer to VHF DSC coast stations in east sea.

• The KIPS Transactions:PartB
• /
• v.9B no.6
• /
• pp.845-852
• /
• 2002

Electronic document processing using EDl (Electronic Data Interchange) must exchange documents using VAN (Value Added Network). However. the use of exclusive software needs alteration of a new document and the use of VAN(Value Added Network) demands an exchange of document and high cost for maintenance. Due to these problems, the existing EDI (Electronic Data Interchange) is turning into Web-based EDI (Electronic Data Interchange). This paper suggests techniques that change EDI (Electronic Data Interchange) messages which exist in two relational databases into XML (extensible Markeup Language) using the JDBC bridge. Also this paper proposes a method that recovers schema using converted XML (extensible Markeup Language) file, and a method which inserts an original record into a declared table. This solves the limitation of an original method that have to use sane database management system and also overcomes the problem in certain circumstances where the EDI (Electronic Data Interchange) exchange does not work.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.661-664
• /
• 2017

Recently, during disasters occurrence, dealing with emergencies has been handled well by the early transmission of disaster relating notifications on social media networks (e.g., Twitter or Facebook). Intuitively, with their characteristics (e.g., real-time, mobility) and big communities whose users could be regarded as volunteers, social networks are proved to be a crucial role for disasters response. However, the amount of data transmitted during disasters is an obstacle for filtering informative messages; because the messages are diversity, large and very noise. This large volume of data could be seen as Social Big Data (SBD). In this paper, we proposed a big data platform for collecting and analyzing disasters' data from SBD. Firstly, we designed a collecting module; which could rapidly extract disasters' information from the Twitter; by big data frameworks supporting streaming data on distributed system; such as Kafka and Spark. Secondly, we developed an analyzing module which learned from SBD to distinguish the useful information from the irrelevant one. Finally, we also designed a real-time visualization on the web interface for displaying the results of analysis phase. To show the viability of our platform, we conducted experiments of the collecting and analyzing phases in 10 days for both real-time and historical tweets, which were about disasters happened in South Korea. The results prove that our big data platform could be applied to disaster information based systems, by providing a huge relevant data; which can be used for inferring affected regions and victims in disaster situations, from 21.000 collected tweets.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.1
• /
• pp.37-48
• /
• 2004

Important Java network application services have been rapidly increased along with the growth of the Internet. So, it is desirable for such applications to serve transparently, continuously and safely even if the network is temporally partitioned or certain hosts running those services are crashed down. To satisfy such requirements, many group communication systems have been developed. However, existing Java-based group communication systems do not support both the extended virtual synchrony and various types of message delivery such as FIFO, causal, total and safe delivery service. In this paper, we present the design and implementation of a Java group communication system, named JACE, supporting various types of message delivery between group members and the extended virtual synchrony model. The JACE system consists of a number of protocol modules which can be stacked on top of each other in a variety of ways. In addition, using the JACE system, we have developed an experimental UDDI registry for discovering and publishing information about Web services.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.1 s.68
• /
• pp.155-167
• /
• 2004

In this paper, the inelastic buckling behavior of the beam under uniform bending was investigated using the energy-based method, which can tackle problems in fourth order eigenvalue. The pattern of residual stress was not available to satisfy the I-sections manufactured in Korea. however; therefore, the well-known polynomial and simplified pattern of residual stress was adopted in this study. The inelastic lateral-distortional buckling behavior of the beam with I-sections manufactured in Korea was investigated. The study was then extended to the inelastic lateral-torsional buckling of the beam by minimizing the out-of-plane web distortion. The inelastic lateral-torsional buckling results obtained in this paper were compared with the prediction of allowable bending stress given in the Korean steel designers' manual (1995). Results showed that the importance of inelastic lateral-distortional buckling did not arise for beams under uniform bending. Likewise, the design method in KSDM (1995) was proven to bo too conservative for intermediate and short spans of beams without intermediate bracing.

• Structural Engineering and Mechanics
• /
• v.28 no.2
• /
• pp.207-220
• /
• 2008

The shear lag has been studied for many years. Nevertheless, existing research gives a variety of stress concentration factors. Unlike the elementary beam theory, the application of load is not unique in reality. For example, concentrated load can be applied as point load or distributed load along the height of the web. This non-uniqueness may be a reason for the discrepancy of the stress concentration factors in the existing studies. The finite element method has been often employed for studying the effect of the shear lag. However, not many researches have taken into account the influence of the finite element mesh on the shear lag phenomenon, although stress concentration can be quite sensitive to the mesh employed in the finite element analysis. This may be another source for the discrepancy of the stress concentration factors. It also needs to be noted that much less studies seem to have been conducted for the shear lag effect on deflection while some design codes have formulas. The present study investigates the shear lag effect in a simply supported box girder by the three-dimensional finite element method using shell elements. The whole girder is modeled by shell elements, and extensive parametric study with respect to the geometry of a box girder is carried out. Not only stress concentration but also deflection is computed. The effect of the way load is applied and the dependency of finite element mesh on the shear lag are carefully treated. Based on the numerical results thus obtained, empirical formulas are proposed to compute stress concentration and deflection that includes the shear lag effect.

• Structural Engineering and Mechanics
• /
• v.74 no.6
• /
• pp.723-735
• /
• 2020

This study is reported the adhesion failure in adhesive bonded composite and specifically for the T-joint structure. Three-dimensional finite element analysis has been performed using a commercial tool and the necessary outcomes are obtained via an eight noded solid element (Solid 185-element) from the library of ANSYS. The structural analysis input has been incurred through ANSYS parametric design language (APDL) code. The normal and shear stress distributions along different layers of the joint structure have been evaluated as the final outcomes. Based on the stress distributions, failure location in the composite joint structure has been identified by using the Tsai-Wu stress failure criterion. It has been found that the failure index is maximum at the interface between flange and web part of the joint (top layer) which indicates the probable location of failure initiation. This kind of failures are considered as adhesion failure and the failure propagation is governed by strain energy release rate (SERR) of fracture mechanics. The different adhesion failure lengths are also considered at the failure location to calculate the SERR values i.e. mode I fracture (opening), mode II fracture (sliding) and mode III fracture (tearing) along the failure front. Also, virtual crack closure technique (VCCT) principle of fracture mechanics steps is used to calculate the above said SERRs. It is found that the mode I SERR is more dominating compared to other two modes of failure for the joint considered. Finally, the influences of various parametric (geometrical and material) effect on SERR of the joint structure are evaluated and discussed in details.