• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.280-287
• /
• 2019

In the oral cavity, the teeth undergo wear and corrosion throughout their lives. Progressive and constant tooth wear is a natural phenomenon of aging, but wear and corrosion due to specific factors are pathological factors. It can cause pathological damage of the occlusal surface, aesthetic problems, dimensional loss and jaw joint disorders. This case is a 26-year-old female patient with general tooth abrasion and erosion on the entire dentition. Diagnostic wax-up was fabricated based on the information including digital facial analysis, physiological stabilization, and evaluation of anterior crown length. Through the digital analysis, the necessary guides for crown lengthening were prepared and the mastication function and esthetics were evaluated by using temporary crowns. Definitive prosthesis was fabricated with the zirconia restorations. The results were satisfactory when they were observed 3 months of follow-up.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.222-228
• /
• 2023

Attrition is the loss of tooth hard tissue due to contact between teeth, and in severe cases, dentin is exposed, accompanied by selective corrosion and excessive wear of teeth, which is called cupping. If these lesions are left untreated, the size of the lesion gradually increases, breaking the unsupported enamel, resulting in a decrease in aesthetics and chewing function. In this case report, patients with cupping and enamel fracture due to severe attrition were directly restored using a resin with soft properties containing organic fillers. In the follow-up observation six years later, most of the filling of the occlusal surface was eliminated, but the filling on the buccal surfaces remained relatively intact, and it was confirmed that this type of resin was suitable for the area where the occlusal force was relatively weak rather than the area where the occlusal force was greatly applied.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.2
• /
• pp.174-182
• /
• 2024

In patients with multiple missing molars, wear patterns or displacement of anterior teeth, collapsed occlusal plane, and reduction in vertical dimension may occur. Particularly, in case of a few remaining teeth on one side, a removable partial denture has biomechanical disadvantage. For this reason, an implant-assisted removable partial denture with a few implant surveyed crowns can be an alternative. In this case, due to the right mandibular posterior teeth loss, the anterior teeth were severely worn and the occlusal plane was collapsed. With minimal increasing vertical dimension, oral rehabilitation was performed using a maxillary fixed prosthesis and mandibular implant-assisted removable partial denture. As a result, functional and aesthetic clinical outcomes were obtained.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.320-329
• /
• 2022

Physiological wear of occlusal surface is inevitable throughout the lifetime, and considered to be normal. Pathologic wear, however, may cause fatal damage to the occlusal surface and destroy esthetics and proper anterior guidance. In such cases, rehabilitation of occlusal wear should be followed by thorough evaluation and diagnosis. In this present case, severe occlusal wear was found in the labial surfaces of mandibular anterior teeth and palatal surfaces of maxillary anterior teeth. Occlusal vertical dimension was evaluated and decided to be regained due to insufficient amount of restorative space. After determining new occlusal vertical dimension, diagnostic wax-up is usually performed to continue prosthodontic treatment. In this case with collapsed occlusion and loss of occlusal vertical dimension, conventional diagnostic wax-up was replaced with various digital devices. Diagnostic wax-up was digitally performed in the software and provisional prosthesis was fabricated with digital tools. With verification with provisional prosthesis, the entire dentition was rehabilitated with newly set occlusal vertical dimension and proper anterior guidance.

• Asia-Pacific Journal of Business
• /
• v.14 no.4
• /
• pp.67-85
• /
• 2023

Purpose - This study seeks to investigate the determinants of global sourcing intention in clothing sewing industry, in particular with its focus on women's knit wear production. Design/methodology/approach - This study collected a unique set of qualitative data through 31 in-depth interviews with fashion brands, promotion agencies, and sewing factories between July 2023 and October 2023. In addition, it analyzed the dataset using the MAXQDA to complement the research findings. Findings - We have two findings. First, the interviewees commonly mentioned the following factors as reasons for considering global sourcing: the human factors(aging of skilled technicians and labor shortages), the financial factors(gap in production unit prices at home and abroad), the relational factors(lack of novelty), and the physical factors(loss of production infrastructure and network), while the human factors(skilled workforce), the production factors(delivery date and product quality), and the relational factors(timely communication and mutual trust) as reasons for continuing domestic sourcing. Additional code analysis of interview also supports this finding. On the other hand, there was also a subtle difference between buyers(brands) and suppliers(promotion agencies and processing plants), and buyers consider the exact delivery date critical so that they could see trend-sensitive women's knit wear on time, and suppliers took production costs, labor costs, and labor shortages, which are financial factors, more seriously. Research implications or Originality - This study provides a richer and more balanced view of existing literature, which has generally tended to introduce global sourcing across the clothing industry despite the existence of various diversity within the industry. In addition, through qualitative research, we introduce that the sewing industry is carried out according to complex factors, and by revealing and categorizing the determinants of global sourcing, we supplement the existing research on the clothing sewing industry centered on survey. On a practical note, this study introduces that there is a difference in view of domestic sourcing and global sourcing between buyers(brands) and suppliers(promotion agencies and sewing factories), suggesting practical implications for revitalizing networks and deriving win-win cooperation network models among members in the future.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.2
• /
• pp.113-122
• /
• 2024

The gradual teeth wear with age is a natural phenomenon, but excessive wear beyond physiological levels can lead to vertical dimension loss, occlusal imbalance, temporomandibular joint disorders, and periodontal disease. In such cases, prosthodontic restoration becomes necessary emphasizing the importance of appropriate vertical dimension increase and stable occlusion in central relation (CR). In this case, a 74-year-old patient with clenching and grinding habit had severe teeth wear and after assessing interocclusal distance, wear degree, pronunciation, and facial profile, it was decided to perform full-mouth fixed prosthesis restoration with a 4 mm vertical dimension increase. And the significantly displaced Maximum Intercuspal Position (MICP) caused by parafunctional movements was re-established as a stable mutually protective occlusal relationship at centric relation and after a successful 4 months adaptation to provisional restorations, the final prosthesis was fabricated. During 4months of observation periods, stable occlusion in central relation and mutual protection occlusal relationships were maintained and the patient was satisfied with function and aesthetics, leading to this report.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.2
• /
• pp.141-153
• /
• 2018

A non-physiological occlusal plane caused by continuous tooth loss, occlusal wear, and failure of a prosthesis may result in an unattractive appearance and functional problems, such as reduced masticatory efficiency and occlusal interference. Therefore, when undertaking prosthetic treatment for edentulous patients or patients with a collapsed occlusal plane, it is important to establish an occlusal plane that is compatible with masticatory function. The patient in this case report had undergone restoration of a completely edentulous maxilla using an implant-supported fixed prosthesis. On follow-up examination in the following 6 years, mechanical complications were observed in the existing implant prosthesis, including porcelain chipping, occlusal wear, and screw loosening. Moreover, due to occlusal wear and supraeruption of the opposing anterior teeth, as well as loss of some posterior teeth, the occlusal plane had collapsed. Following diagnosis, the patient underwent full mouth rehabilitation, involving additional implant installation in edentulous sites, recreation of the existing prosthesis, and prosthetic restoration of all remaining teeth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.4
• /
• pp.324-329
• /
• 2012

Excessive tooth wear causes loss of tooth structure, disharmony of occlusal plane, functional and esthetic problems. Although the decrease of occlusal vertical dimension may be compensated by growth of alveolar bone, if the length of tooth is not enough for the retention of restoration, minimum increase of occlusal vertical dimension is required without discomfort of the patient. In this case, 33-year-old woman drinks more than 1 liter of soft drinks a day and has bruxism in night time, visited in Seoul National University Dental Hospital with chief complaint of generalized tooth wear and related esthetic and functional problems. It was considered as a loss of occlusal vertical dimension based on the accelerated tooth wear caused by erosion and bruxism and facial appearance, phonetic, esthetic, functional evaluations. It was planned to raise occlusal vertical dimension by provisional restoration two times for patient's adaptation, 3 mm and 2 mm each, total 5 mm. Confirming no discomfort and clinical symptom during total 16 weeks after restoration with provisional fixed restoration, it was restored with porcelain fused to gold crown and bridge. Because the patient was young woman, anterior teeth were restored with collarless porcelain fused to gold crown. This case presents that satisfactory esthetic and functional result by full mouth rehabilitation with increase of occlusal vertical dimension.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.1
• /
• pp.42-47
• /
• 2014

Decrease of occlusal vertical dimension (OVD) due to loss of teeth structure and destruction of the occlusal plane by severely worn dentition may cause cross bite or temporomandibular joint disorder by following change of facial feature or the loss of anterior guidance. Full mouth rehabilitation via an increase of the OVD can be considered to avoid this problem and proper evaluation of patient's OVD is essential. An 80 year old male visited for overall prosthodontic treatment, cross bite due to continuous wear and following decrease of the OVD were observed. We analyzed the existing occlusal relationship using the diagnostic cast, the radiographic evaluation and clinical test, and then proper increase of OVD was selected. The new OVD on diagnostic wax up was placed by the temporary restoration. After 3 months of observation period, final restoration with fixed partial dentures and implant overdenture were made. Throughout the follow-up period of 8 months, the aesthetic and functional improvement can be obtained.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.673-682
• /
• 2001

The use of resin composites has continued to increase over the last several years. In spite of their growing popularity, composites continue to exhibit a number of undesirable characteristics. One of the major deficiencies of composite restorative resins is their inadequate resistance to wear. Of the multitude of factors that have been associated with wear, subsurface degradation within the restoration is considered to be one. The aim of this study was to evaluate the resistance to degradation of four commercial composite resins in an alkaline solution. This solution with a high concentration of hydroxyl ions is a convenient medium for accelerated degradation of silane coupling and filler particles. The brands studies were Definite($Degussa-H\ddot{u}ls$ AG, Germany), Prodigy(Kerr, USA), Pyramid(Bisco, USA) and Synergy(Coltene, Swiss). Preweighed discs of each brand were exposed to 0.1N NaOH solution at $60^{\circ}C$. After 14 days they were removed, neutralized with HCl, washed with water and dried. Resistance to degradation was evaluated on the basis of following parameters : (a) mass loss(%)-determined from pre-and post-exposed specimen weights : (b) Si loss(ppm)-obtained from ICP-AE analysis of solution exposed to specimens; and (c) degradation $depth({\mu}m)$-measured microscopically (SEM) from polished circular sections of exposed specimens. The results were follows: 1. Mass loss of Synergy was $1.24{\pm}0.002%$, it was the highest, there was no significant difference among the materials. 2. The degree of degradation layer depth of Synergy was $107.83{\pm}2.52{\mu}m$, it was the highest, there was no significant difference among any other materials than Synergy. 3. There was no difference among the four materials in Si loss. 4. The correlation coefficient between mass loss and degradation depth was relatively high(r=0.06, p<0.05). 5. There was no coefficient correlation between Si loss and mass loss, the degree of degradation layer depth and Si loss. 6. When observed with SEM, destruction of bonding is observed between resin matrix and filler.