• 한국재료학회지
• /
• 제9권9호
• /
• pp.937-942
• /
• 1999

Fe계 합금의 적층결함에너지를 감소시키는 것으로 알려진 Mn이 Fe-20Cr-1C-Si 경면처리 합금의 변형유기 상변태거동과 상온 및 고온 마모저항성에 미치는 영향에 대하여 조사하였다. 15ksi의 접촉응력에 대하여 0~25wt.% Mn을 첨가한 시편은 모두 상온에서 마모손실량이 적은 우수한 마모저항성을 보였는데 Mn 첨가량이 5wt.% 이하인 시편의 경우 마모표면에서 ${\gamma}$$\longrightarrow$$\alpha$\`변형유기 상변태가 발생한 반면 15wt.% 이상 Mn을 첨가한 시편에서는 ${\gamma}$$\longrightarrow$$\varepsilon$변형유기 상변태가 발생하는 것으로 나타났다. 25$0^{\circ}C$까지 고온 마모시험결과 ${\gamma}$$\longrightarrow$$\alpha$\`변형유기 상변태가 발생한 5wt.% 이하 Mn 첨가시편은 Mn 첨가량이 증가할수록 마모손실량이 증가하는 것으로 보아 Mn 첨가는 ${\gamma}$$\longrightarrow$$\alpha$\`변형유기 상변태에 있어서 고온 마모저항성을 저하시키는 것으로 생각되며 이는 Mn이 ${\gamma}$$\longrightarrow$$\alpha$\`변형유기 상변태의 M(sub)d 온도를 감소시키기 때문으로 생각된다. 반면에 ${\gamma}$$\longrightarrow$$\varepsilon$변형유기 상변태가 일어난 15wt.% 이상 Mn 첨가 시편의 경우 Mn 첨가량 증가에 따른 고온 마모손실량의 차이가 없는 것으로 보아 ${\gamma}$$\longrightarrow$$\varepsilon$변형유기 상변태는 ${\gamma}$$\longrightarrow$$\alpha$\`변형유기 상변태에 비해 온도의 존성이 적은 것으로 생각된다.

• 패션비즈니스
• /
• 제15권4호
• /
• pp.1-15
• /
• 2011

Femme Fatale in Film Noir is a wicked woman character who seduces the male partner to a ruin. In the film, the dress style is of extreme importance for the personality creation of the character as well as the development of the plot. With this background, I have looked over the Femme Fatale dress style that appears in the movie . First, it expresses Femme Fatale which stresses the feminine trait by a dress style with enlarged chest and hip parts and long, slim silhouette with tight waist and knee line. Second, the Femme Fatale with pretended purity presents narcissistic satisfaction like a saint virgin by wearing a neck-high one-piece dress embellished with frills, but the use of mirror represents self-alienation and the vanity of purity. Third, the Femme Fatale with its military dress style presents authoritative sternness which leads seduced male into ruin with its destructive power. Fourth, wearing jersey type or knitted wear that sticks to the body presents sensual Femme Fatale. Fifth, the tulle, chiffon, and white handkerchief used for the creation of grotesque Femme Fatale represents harmlessness and prohibition of immoral behavior, and the black gloves, pillbox, and the number on the tulle present her uneasy psychological state from the fear of being discovered after murdering her husband. On the other hand, the see-through tulle presents alluring sensual beauty. Sixth, the combination of the dialogue in the final sequence and drapery type as in Greek goddess represents the saint virgin of salvation who acknowledges her own fault and returns to her purity again. In addition, accessories and others made from shining material represent hidden conspiracy through simple dress and contradictory dynamics, and shoes embellished with bonbon, etc represent sexual implications in connection with male.

• 복식문화연구
• /
• 제17권6호
• /
• pp.960-971
• /
• 2009

The purpose of this study was to observe street fashion, to determine preferred design of jean and to analyze preferred jean styling based on types of jean pants design, toward 20s to 30s women. We observed outfits of jean styles on the street using photography method and conducted a survey to 400 females to get information of consumers. Four hundred questionnaires were analyzed using SPSS. As a result of street research, the majority of people were wearing jean pants with T-shirts, sandal/high heel shoes and totes. The results of market research showed that preferred jean styles were significantly associated with age and marital status. Preferred color of jean pants was also significantly associated with age variable. Current popular jean style was a skinny style. We evaluated results of styling with different jean pants, creating five different images. There was a significant relationship between age/marital status and styling image in different jean styles. In a bootcut style, age variable was significantly associated with different styling images. Generally, most of people responded cute/casual image styling was the best for the bootcut style. In skinny pants, there was a significant association between a residence area and a styling image. Modern/chic image styling with skinny pants was the most favored one. In cropped jean pants, marital status was significantly associated with styling image created. We realized that we can create different images through a styling.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.105-105
• /
• 2016

Recently, high power impulse magnetron sputtering (HIPIMS) has attracted considerable attentions due to its high potential for industrial applications. By pulsing the sputtering target with high power density and short duration pulses, a high plasma density and high ionization of the sputtered species can be obtained. HIPIMS has exhibited several merits such as increased coating density, good adhesion, microparticle-free and smooth surface, which make the HIPIMS technique desirable for synthesizing hard coatings. However, hard coatings present intrinsic defects (columnar structures, pinholes, pores, discontinuities) which can affect the corrosion behavior, especially when substrates are active alloys like steel or in a wear-corrosion process. Atomic layer deposition (ALD), a CVD derived method with a broad spectrum of applications, has shown great potential for corrosion protection of high-precision metallic parts or systems. In ALD deposition, the growth proceeds through cyclic repetition of self-limiting surface reactions, which leads to the thin films possess high quality, low defect density, uniformity, low-temperature processing and exquisite thickness control. These merits make ALD an ideal candidate for the fabrication of excellent oxide barrier layer which can block the pinhole and other defects left in the coating structure to improve the corrosion protection of hard coatings. In this work, CrN/Al2O3/CrN multilayered coatings were synthesized by a hybrid process of HIPIMS and ALD techniques, aiming to improve the CrN hard coating properties. The influence of the Al2O3 interlayer addition, the thickness and intercalation position of the Al2O3 layer in the coatings on the microstructure, surface roughness, mechanical properties and corrosion behaviors were investigated. The results indicated that the dense Al2O3 interlayer addition by ALD lead to a significant decrease of the average grain size and surface roughness and greatly improved the mechanical properties and corrosion resistance of the CrN coatings. The thickness increase of the Al2O3 layer and intercalation position change to near the coating surface resulted in improved mechanical properties and corrosion resistance. The mechanism can be explained by that the dense Al2O3 interlayer acted as an excellent barrier for dislocation motion and diffusion of the corrosive substance.

• 한국철도학회논문집
• /
• 제19권5호
• /
• pp.565-575
• /
• 2016

철도차량 영업 운행 중 빈번히 발생하는 차륜 마모, 손상 등의 결함을 제거하기 위하여 실시되는 차륜 전삭 공정과 관련하여 전삭 전후의 차량 동적성능을 분석하였다. 전동차를 대상으로 차륜 전삭 전후의 차륜답면형상을 계측, 분석하였으며 진동 및 승차감 특성을 분석하고자 차량 주행시험을 실시하였다. 시험결과, 차륜 전삭 후 차량 진동 RMS값은 전삭 전에 비하여 저감되었으며 철도차량 기술기준에 의거 분석한 차체 진동성능은 전삭 전에 비하여 개선되었다. 승차감레벨은 전삭 전에 비하여 전삭 후 좌우, 상하방향 모두 최대 약 3dB의 개선 효과를 보였으며 주행안전성 또한 개선됨을 확인하였다.

• 대한간호학회지
• /
• 제47권5호
• /
• pp.651-662
• /
• 2017

Purpose: The purpose of this study was to evaluate the effectiveness of a sleep improvement program combined with an aroma-necklace on sleep, depression, anxiety, and blood pressure in elderly women living at home. Methods: A program consisting of a four-week (one hour per week) sleep improvement intervention plus use of an aroma-necklace, was developed based on Cox's Interaction Model of Client Health Behavior. 70 elderly women were assigned to the experimental (n=35) or control group with no intervention (n=35). Data from 62 participants (32 in the experimental and 30 in the control) were analyzed using the SPSS 21.0 program. Women in the experimental group were instructed to constantly wear the aroma necklace filled with marjoram and orange oil until the program was completed. Sleep quality, sleep duration, sleep satisfaction, depression, anxiety, and blood pressure were measured to identify the effectiveness of the program. Results: Significant group differences were found in sleep quality (t=-5.10, p<.001), sleep duration (z=-3.10, p=.002), sleep satisfaction (z=-4.13, p=<.001), depression (t=2.53, p=.015), and anxiety (z=-2.47, p=.014). No differences were found in the systolic or diastolic blood pressure. Conclusion: The results indicate that a sleep improvement program combined with an aroma-necklace was effective in improving sleep disturbances in elderly women living at home. Nurses may contribute to improving sleep among elderly women by applying this program to aged women living in various environments.

• 한국세라믹학회지
• /
• 제36권1호
• /
• pp.89-96
• /
• 1999

석고몰드의 단점을 극복할 수 있는 다공질 알루미나 몰드의 제조저건을 확립하였다. 다공질 알루미나 몰드의 제조를 위해 활성탄의 질량비에 따라 조성비를 달리하여 첨가한 후, ESA와 유동특성 등을 조하삼으로써 안정된 이상 슬러리를 제조하였으며, 이를 석고몰드에 캐스팅하여 얻은 원통형 알루미나 몰드를 사용하여 활성탄의 양과 소결온도에 따른 수축율 변화와 마모에 대한 저항성을 측정하였다. 다공질 알루미나 몰드의 소결에서는 비수축 소결구인 표면확산에 의해 입자간 넥 강도의 증진을 통한 몰드의 강도 증진을 도모하는 것이 바람직하며, 이를 위해 1,00$0^{\circ}C$이하에서 유지시간의 변화에 따른 열역학적 방법, 1,00$0^{\circ}C$이상의 온도에서 알루미나의 수축을 억제하면서 빠른 승온속도를 열처리온도에 따른 동역학적 방법과 이 두가지 방법을 혼합하는 방법 등으로 구분하여 다동질 알루미나 몰드의 소결조건을 분석하였다. 위 방법들에 대한 다공질 알루미나 몰드의 캐스팅 특성을 분석한 결과, 복합 소결법이 최적임을 알수 있었다. 제조된 다공질 알루미나 몰드의 비교적 높은 강도를 보였으며, 석고몰드레 비해 빠른 건조시간, 산, 염기에 대한 내식성 및 캐스팅 특성이 우수하였다.

• 복식
• /
• 제63권6호
• /
• pp.127-139
• /
• 2013

This research is designed to provide basic data to study the life and culture of multicultural families in Korea by taking a look at the clothing behaviors and attitudes toward traditional dresses. To this end, quantitative research was conducted on Korea-Vietnam multicultural families and Korean families. The surveys of the Korean families were completed by 250 married women in Seoul, and those of Korea-Vietnam multicultural families by 104 married Vietnamese women living in Seoul, Gyeonggi-do and Incheon. The data were analyzed using frequency analysis, factor analysis, t-test, crosstabs and ${\chi}^2$-test. The findings are as follows: First, the comparison of clothing behaviors of the Korean families and the Korea-Vietnam multicultural families found that they had statistically significant differences in values towards clothes, clothes shopping orientation and clothes purchasing behaviors. The Korean women were more involved in clothes and fashion-oriented than their Vietnamese counterparts. However, the Vietnamese women in their 20s were likely to rely more on social trends than their own needs when purchasing clothes compared to their Korean counterparts. Korean families preferred to shop in department stores, while the multicultural families relied more on discount stores and outlets. Second, the comparison of the Korean families and the Korea-Vietnam families in attitudes toward their own traditional dresses and how often to wear them showed statistically meaningful differences. The Korean group had more negative attitudes toward Hanbok, the Korean traditional dresses than the Vietnamese group. The Vietnamese women showed more interest in information on Hanbok than their Korean counterparts. They also were wearing the Korean traditional dresses more often than the Korean families. In addition, the Vietnamese women showed a stronger tendency than the Korean women that they took pride in their country's traditional dresses and believed that they were beautiful.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.1-6
• /
• 2017

Recently, the brittle materials such as ceramics, glass, sapphire and textile material have been widely used in semiconductors, aerospace and automobile owing to high functional characteristics. On the other hand, it has the characteristics of difficult-to-cut material relative to all materials. In this study, diamond electro-deposited band-saw machine was developed to operate stably using water-coolant type through relative motion between band-saw tool and $Al_2O_3$ material. High densified $Al_2O_3$ material was manufactured by spark plasma sintering method. The bulk density was observed by the Archimedes law and the theoretical density was estimated to be $3.88g/cm^3$ and its hardness 14.7 MPa. From the dicing sawing test of $Al_2O_3$ specimen, behavior of surface roughness and band-saw wear are dominantly affected by the increase of the band-saw linear velocity. Additionally, an continuous pattern type of diamond band-saw was a very effective due to entry impact as a one-off for brittle material.

• 패션비즈니스
• /
• 제19권5호
• /
• pp.1-16
• /
• 2015

The appearances and geometry structures of knitted fabrics have important effects on their functions as textile fabrics. Structural design of the woven fabric, prior to the manufacturing processes in the weaving mill, often leads to a similar predictable appearance in the final outcome with the corresponding weave design. The increase of the employment of elastic textile yarns in knitting fabrics for comfort stretch or outdoor sports wear knit products has, however, resulted in difficulties in predicting the final appearance of the knit structure design. Due to the stretchability and exceptional recovery behavior of the elastic yarns such as polyurethane elastomeric yarns, the appearance of the final product often differs from the initial knit design. At textile CAD program for preparing tricot knit designs has been employed in this study to predict the two dimensional appearance of the design. The similarities between the designs and corresponding knit products seem to be acceptable for the two-dimensional textile CAD program in this study. However, when elastomeric yarns are partially employed in the polyester filament tricot product, a considerable amount of departure from the design is apparent due to the constriction and/or deformation of property differences in the elastomeric yarns and polyester filament yarns. Therefore, another purpose of this study is to measure the departure of the final tricot product from the initial tricot design, especially in the case employing elastomeric yarns in the knit structure together with regular polyester filament yarns. For measuring the three-dimensional departure, a 3D scanning system has been used for the mesh reconstruction of the fabric specimen. Hopefully, the result from this study will be used as a guide to modify and improve the current textile CAD program proposed for the two-dimensional simulation of the tricot.