• Journal of Korea Multimedia Society
• /
• v.7 no.9
• /
• pp.1246-1254
• /
• 2004

This paper presents a image coding method that is well adaptive to close-range video transmission because of its low titrate and simple coding procedure. At first, it reduces temporal redundancies by performing image DPCM between previous frame and current frame, and makes wavelet transformed image of this difference image. Then, the coefficients are quantized selectively by using the coefficient values of base level and mid-frequency level because inter-level redundancies are widely exists in multi-resolution images. Finally quantized coefficients are made iron the function that implies the target bitrate, the average coefficient energy, and the value of the level. The proposed method shows the effective Performance in the experiments using the continuous motion images and transition images.

• Journal of Environmental Science International
• /
• v.15 no.9
• /
• pp.865-870
• /
• 2006

Recently, Total Organic Carbon (TOC) which can be measured instantly can be used as an organic pollutant index instead of BOD or COD due to the diversity of pollutants and non-degradable problem. The primary purpose of the present study is to reveal the properties of time series data for TOC which have been measured by real-time monitoring in Juam Lake and, in particularly, to understand the long- and short-term characteristics with the extraction of the respective components based on the different return periods. For the purpose, we proposed Discrete Wavelet Transform (DWT) as the methodology. The results from the DWT showed that the different components according to the respective periodicities could be extracted from the time series data for TOC and the variation of each component with respect to time could emerge from the return periods and the respective energy ratios of the decomposed components against the raw data.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.1
• /
• pp.133-140
• /
• 2001

Recently, to assure the integrity of a structural components such as piping pressure vessels and thinning structure, Lamb wave inspection technique has been used in material evaluation. It is very important to select the optimal Lamb wave mode and to analyze the signal accurately because of its unique dispersion properties grnerating several modes within the speci-men. It this study, the feasibility of material evaluation applications using wavelet analysis of Lamb wave has been veir-fied experimentally. These results show as follows; 1)dispersion characteristic of each mode in dispersion curve is demon-strated that A0 mode propagating material surface is useful mode having the lest energy loss and not sensitive to surface condition. 2) it can be detected even the micro defect ($1\times2mm$) fabricated in ultrasonic probe flaw distance (290mm) to axis direction. 3) the wavelet transform which is called "time-frequency analysis" shows the Lamb wave propagation due to the change of materials characterization can be evaluated at each frequency and experimental group velocity of Lamb wave agrees quite well with that of simulated dispersion curve.ion curve.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.79-85
• /
• 2003

One of unique characteristics of guided waves is a dispersive behavior that guided wave velocity changes with an excitation frequency and mode. In practical applications of guided wave techniques, it is very important to identify propagating modes in a time-domain waveform for determination of defect location and size. Mode identification can be done by measurement of group velocity in a time-domain waveform. Thus, it is preferred to generate a single or less dispersive mode But in many cases, it is difficult to distinguish a mode clearly in a time-domain waveform because of superposition of multi modes and mode conversion phenomena. Time-frequency analysis is used as efficient methods to identify modes by presenting wave energy distribution in a time-frequency. In this study, experimental guided wave mode identification is carried out in a steel plate using time-frequency analysis methods such as wavelet transform. The results are compared with theoretically calculated group velocity dispersion curves. The results are in good agreement with analytical predictions and show the effectiveness of using the wavelet transform method to identify and measure the amplitudes of individual guided wave modes.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1093-1101
• /
• 2015

Partial Discharge (PD) is a physical phenomenon, which causes defects and damages to the insulation. This phenomenon is regarded as the most important source of fault and defect in power transformers. Therefore, methods of high speed and precision are considered of special importance for the maintenance of transformers in localization of the origin of partial discharge. In this paper, the transformer winding is first modeled in a transient state by using RLC ladder network and multiconductor transmission line (MTL) models. The parameters of the two models were calculated by Ansoft Maxwell software, and the simulations were performed by Matlab software. Then, the PD pulses were applied to the models with different widths of pulses. With regard to the fact that the signals received after the application of PD had a variable frequency nature over time, and based on the wavelet transform and signal energy, a new method was presented for the localization of PD. Ultimately; the mentioned method was implemented on a 20 kV winding distribution transformer. Then, the performances of the models used in this paper, including RLC and MTL models, were compared in different frequency bands for the correct distinction of partial discharge location.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.683-689
• /
• 2016

Most outdoor solid insulators may suffer from surface degradations due to non-stationary currents that flow on the insulator surface. These currents may be classified as leakage, discharge and tracking currents due to their disturbing potencies respectively. The magnitude of these currents depends on the degree of the contamination of surface. The leakage signals are followed by discharge signals and tracking signals which are capable of forming carbonized tracking paths on the surface between high voltage and earth contacts (surface tracking). Surface tracking is one of the most breakdown mechanisms observed on the solid insulators, especially polymers which may cause severely reduced lifetime. In this study the degradations observed on polyester resin based insulators are investigated according to the IEC 587 Inclined Plane Test Standard. The signals are monitored and recorded during tests until surface tracking initiated. In order to prevent total breakdown of an insulator, early detection of tracking signals is vital. Continuous Wavelet Transform (CWT) is proposed for classification of signals and their energy levels observed on the surface. The application of CWT for processing and classification of the surface signals which are prone to display high frequency oscillations can facilitate real time monitoring of the system for diagnosis.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2010

Noise removal methods for noisy images have been studied a lot in the domain of spatial and transform filtering. Low pass filtering was initially applied in the spatial domain. Recently, discrete wavelet transform has widely used for image denoising as well as image compression due to an excellent energy compaction and a property of multiresolution. In this paper, Gabor cosine and sine transform which is considered as human visual filter is applied to image denoising areas using soft thresholding technique. GCST is compared with excellent wavelet transform which uses existing soft thresholding methods from PSNR point of view. Resultant images removed noises are also visually compared. Experimental results with adding four different standard deviation levels of Gaussian distributed noises to real images show that the proposed transform has better PSNR performance of a maximum of 1.18 dB and visible perception than wavelet transform.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.455-458
• /
• 1997

We are exposed to the various external stimuli input from the environment, which cause emotional changes based on the characteristics of the stimuli. Unfortunately, there are no quantitative results on relationship between human sensibility and the characteristics of physiological signals. The objective of this study was to quantify EEG signals evoked by visual stimulation based on the assumption that the analysis of the variability on the characteristics of the EEG waveform may provide the significant information regarding changes in psychological states of the subject. Seven university students were participated in this study. The experiment was devised with eleven experimental conditions, which are control and ten different types of visual stimulation based on IAPS (International Affective Picture Systems). Wavelet transformation was employed to analyze the EEG signals. Most positive and negative emotional response were compared in pairs. The results showed that the reconstructed signals at the decomposition level revealed the different energy value on the EEG signals. Also, general patterns of EEG signals in rest state compare with positive and negative stimulus were found. This study could be extended to establish an algorithm which distinguishes psychophysiological states of the subjects exposed to the visual stimulation.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.477-481
• /
• 1997

We are exposed to the various external stimuli input from the environment, which cause emotional changes based on the characteristics of the stimuli. Unfortunately, there are noquantitative results on relationship between human sensibility and the characteristics of physiological signals. The objective of this study was to quantify EEG signals evoked by visual stimulation based on the assumption that the analysis of the variability on the characteristics of the EEG waveform may provide the significant information regarding changes in psychological states of the subject. Seven university students were participated in this study. The experiment was devised with eleven experimental conditions, which are control and ten different types of visual stimulation based on IAPS(International Affective Picture Systems). Seven subjects were used to obtain EEGs while introducing visual stimulation. Wavelet transformation was employed to analyze the EEG signals. Most Positive and negative emotional response were pairely compared. The results showed that the reconstructed signals at the decomposition level revealed the different energy value on the EEG signals. Also, general patterns of EEG signals in rest state compare with negative and positive stimulus were found. This study could be extended to estabish an algorithm which distinguishes psychophysiological states of the subjects exposed to the visual stimulation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.6
• /
• pp.309-317
• /
• 2022

In this paper, we propose a machine learning-based copy-move forgery detection network with dual branches. Because the rotation or scaling operation is frequently involved in copy-move forger, the conventional convolutional neural network is not effectively applied in detecting copy-move tampering. Therefore, we divide the input into rotation-invariant and scaling-invariant features based on the wavelet coefficients. Each of the features is input to different branches having the same structure, and is fused in the combination module. Each branch comprises feature extraction, correlation, and mask decoder modules. In the proposed network, VGG16 is used for the feature extraction module. To check similarity of features generated by the feature extraction module, the conventional correlation module used. Finally, the mask decoder model is applied to develop a pixel-level localization map. We perform experiments on test dataset and compare the proposed method with state-of-the-art tampering localization methods. The results demonstrate that the proposed scheme outperforms the existing approaches.