• 한국조명전기설비학회지:조명전기설비
• /
• 제2권2호
• /
• pp.59-63
• /
• 1988

고정 AC 전력전원에서 PWN(Pulse Width Modulation) 기법은 전압과 기본파 주파수를 가변 시키는 데 이용되어 왔다. 종래의 PWN 기법은 전류수, 필터크기 등의 문제점 때문에 PWN 출력 전압파형을 모터 구동 등의 제어 대상에 응용하는 연구가 진행되었다. 그러나 본 논문에서는 출력단 고속 스윗칭 소자를 사용하여 캐리어 주파수를 10(KHz)-45(KHz)까지 정현 PWN 시키고, 인버터의 출력단 파형은 소용량LPF(Low Pass Filter)를 사용하여 PAM(Pulse Amplitude Modulation)을 얻어냈다. 정현 PWN 제어 회로는 속응성과 제어성을 고려하여 마이크로 프로세서와 아날로그 회로로 혼합구성 하였다. 그리고 실험 결과는 변조도 0.6-1.0까지 변할 때 전압 파형을 관찰했다.

• 전력전자학회논문지
• /
• 제26권2호
• /
• pp.90-95
• /
• 2021

In contrast to AC grounding systems, the ground electrode in DC systems continuously maintains positive or negative polarity. Ground electrodes with (+) polarity proceeds by oxidation reaction. Thus, the DC current should flow opposite to the polarity of the leakage current flowing through the (+) ground electrode by using a compensation electrode, and the current flowing through the (+) ground electrode can be 0A. However, according to protecting the (+) ground electrode, the compensation electrode corrodes and gets damaged. Thus, the (+) ground electrode must be protected from corrosion, and the service life of the compensation electrode must be extended. As an alternative, the average value of the current flowing through the compensation electrode should be equal with the value of the leakage current flowing through the (+) ground electrode by using the square waveform. Throughout the experiment, the degree of corrosion on the compensation electrode is analyzed by the frequency of the compensation electrode for a certain time. In the experiment, the frequencies of the square waveform are considered for 0.1, 1, 10, 20, 50, 100 Hz, and 1 kHz. Through experiments and analysis, the optimal frequency for reducing the electrolytic damage of the (+) electrode and compensation electrode in an LVDC grounding environment is determined.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1990년도 추계학술발표회논문집
• /
• pp.68-72
• /
• 1990

In this paper, the technique of particul-ar harmonics elimination in three-phase PWM Inverter is discussed. And voltage control technique is derived whereby harmonics eli-mination is possible in variable voltage variable frequency three-phase I.M. The results show that experiments are in a good agreement with simulation based on the theory.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.432-435
• /
• 1997

This Paper proposes a novel sinusoidal converter which improves input power factor and input current waveform without any complicated switching modulation such as a pulse width modulation or a complicated feed-back control. It is composed of a full bridge diode, a pair of capacitors, a pair of inductors and a pair of switching devices. The configuration and control strategy are both simple however, the sinusoidal converter effectively reduces reactive power and hamonics included in a input line current. Excellent behavior of the proposed converter is verified by theoretical analysis and experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.257-260
• /
• 1993

A new method of spindle waveform detection is presented for the automated analysis of sleep EEG. The method is based on the combined application of signal conditioning in the time-domain and local spectrum analyzing in the frequency-domain. The overall detection system is implemented and, tested in real-time with a total of 24 hour data obtained from four subjects. The result shows an average agreement of 86.7% with the visually inspected result.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.521-524
• /
• 2000

The switched reluctance motor(SRM) drive system provides a good adjustable speed characteristics. However higher torque ripple are one of the few disadvantages of the SRM drives. The SRM would have to operated with an MMF waveform specified for switching angle and phase voltage. This paper proposes control modelling method using ANN(Artificial Neural Network) and GA(Genetic Algorithm) that are used to control switch-on angles and input voltage.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.808-812
• /
• 1998

A new SPWM control method for Uninterrupted Power System(UPS) is presented. A triangle waveform is used as the reference signal. The desired SPWM control signal can be obtained more easily with a group of comparators. The output AC voltage can be regulated by controlling the lower reference and the upper reference of the comparators according to the feedback voltage. Basic principle, an actual circuit and the experimental results on a 500W UPS for computer system is discussed as an example.

• 대한전기학회논문지
• /
• 제38권11호
• /
• pp.896-904
• /
• 1989

PWM techniques which eliminate and reduce harmonics of output voltage in PWM Inverter driving System with fluctuating input volotage are described. First, harmonic factors are analyzed from harmonic equation of general PWM waveform and by examination of control possiblity of each factor, controllable factor is selected. Applying controllable factor to NPWM, PWM techniques using reference wave and carrier wave modulation are introduced. Actually, by the experiment applied with this strategy, the reduction of harmonics of output voltage is confirmed.

• 전력전자학회논문지
• /
• 제4권2호
• /
• pp.128-137
• /
• 1999

최근 전력전자기술 및 인버터 회로의 다양한 제어기법의 발달에 따라서 용접기 분야에서의 용접성능 향상에 관한 다양한 연구가 진행되고 있으며 특히{{{{ { CO}_{2 } }} 아크 용접기의 경우 용접성능을 좌우하는 스패터 발생을 최소화 하는 기법이 활발하게 연구되고 있다. 그러나 현재까지는 용접기의 출력전압을 정전압으로 제어하는 방식을 사용함에 따라 용접기의 금속이행과정을 임의로 제어하는 것이 불가능하였고, 특히 스패터가 다량으로 발생하는 저전류영역의 금속이행과정인 단락이행에서의 스패터 저감을 기대하기가 어려웠다. 따라서 본 논문에서는 마이크로프로세서를 이용한 인버터 출력전류의 파형제어기법을 사용하여 인버터 아크 용접기의 출력전류를 순시적으로 제어함에 의하여 스패터 저감, 단락주기의 안정화 및 순간단락현상 감소의 측면에서 용접성능을 개선위한 연구를 수행하였고 이상의 연구에 대한 결과를 제시하였고, 또한 인버터 아크 용접기의 AC/DC 전력변환장치로 SMR(Switched Mode Rectifier)를 사용하여 시스템을 단위역율로 운전하였으며 입력전류의 저차 고조파 억제효과를 얻을 수 있었다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제5권2호
• /
• pp.84-95
• /
• 1991

Mostly, phase control method is used to control the single phase AC power. The phase control method has some advantages such as ease to control and simple configuration. But the retardation of firing angle causes a lagging current even if load is purely resistive. So phase control causes a lagging power factor and a low efficiency at the input side in comparing with the system without switching device. A new PWM control method which can improve these defects for single phase AC power control circuit is proposed in this paper. The performances of the single phase AC power control circuit using the proposed method was investigated theoretically. Both power factor and waveform of load current can be improved better than those of the conventional methods.