• 한국전산구조공학회논문집
• /
• 제20권5호
• /
• pp.521-532
• /
• 2007

원형축이 축방향으로 충격하중을 받으면 외경에서 반사된 파가 축의 중앙으로 집중되어 순간적으로 큰 응력이 발생하게 된다. 본 연구에서는 여러 가지 충격 축하중을 받는 횡등방성 반-무한 원형축을 대상으로 중실축 내의 종방향 응력전파를 축대칭 유한요소법과 Houtolt 시간적분법을 이용하여 프로그램을 작성하고 수치적으로 해석하여 그 결과를 횡등방성 재료의 재료구성비에 따라 자세히 설명한다. 제시된 해법의 타당성은 본 논문 수치 결과와 기 해석된 다른 해법에 의한 수치결과의 비교를 통해 검증된다. 여러 종류의 충격하중들에 따른 파동의 결과를 2차원, 3차원적으로 제시하여 축응력 전파를 이해하는데 기본 자료가 되도록 하였다. 또한 유한요소법을 이용하여 수치해석을 함에 있어 정확한 수치결과를 얻기 위한 무차원 동특성 시간변수에 대해 기술하였다.

• Journal of the Optical Society of Korea
• /
• 제20권2호
• /
• pp.300-304
• /
• 2016

A dual loop optoelectronic oscillator (OEO) based on an acousto-optic modulator (AOM) for single mode operation with an acousto-optic delay line is demonstrated in this paper. When the OEO operates, the free spectral range is a function of the total loop length of the OEO, which is mainly dependent on the propagation time of the acoustic wave in the AOM. Due to the huge difference in the magnitude between the speed of light and the acoustic velocity in the AOM, the effective loop length converted to light-propagation length of the OEO increases to 3.8 km. With 150 MHz oscillation frequency, phase noise of -118 dBc/Hz at 10 kHz frequency offset, and -140 dBc/Hz at 200 kHz frequency offset, is achieved.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권5호
• /
• pp.199-206
• /
• 2003

Numerical solutions to complex characteristic equations are quite often required to solve electromagnetic wave problems. In general, two traditional complex root search algorithms, the Newton-Raphson method and the Muller method, are used to produce such solutions. However, when utilizing these two methods, the choice of the initial iteration value is very sensitive, otherwise, the iteration can fail to converge into a solution. Thus, as an alternative approach, where the selection of the initial iteration value is more relaxed and the computation speed is high, Davidenko's method is used to determine accurate complex propagation constants for leaky circular symmetric modes in circular dielectric rod waveguides. Based on a precise determination of the complex propagation constants, the leaky mode characteristics of several lower-order circular symmetric modes are then numerically analyzed. In addition, no modification of the characteristic equation is required for the application of Davidenko's method.

• 한국지반공학회논문집
• /
• 제29권1호
• /
• pp.5-12
• /
• 2013

철도노반에서 임계속도효과는 시간영역에서의 유사-공진현상으로서 차량의 주행속도와 노반표면파의 군속도대역이 중첩되면서 에너지가 증폭되는 현상을 의미한다. 과거에는 열차의 주행속도가 낮고 지반의 군속도가 높았기 때문에 문제가 되지 않았으나, 열차속도가 고속화되면서 임계속도효과가 궤도틀림에 영향을 미치는 것으로 보고되고 있다. 현재까지는 임계속도에 대하여 주로 이론적인 분석만 제시되었는데 실질적인 임계속도효과를 효율적으로 평가하기 위해서는 궤도 및 노반의 지지강성을 현장조건과 유사하게 고려하는 것이 필요하다. 그래서 본 논문에서는 유한요소해석을 이용하여 궤도 및 노반의 지지조건을 고려한 임계속도해석을 수행하였다. 궤도조건은 자갈궤도와 콘크리트궤도로 구분하였으며 노반의 지지강성은 10~300MPa범위에서의 임계속도영향을 평가하였다. 해석결과 노반의 지지강성에 따른 변형증폭을 확인하였으며, 궤도지지조건에 대한 임계속도영향도 매우 큰 것으로 나타났다.

• 비파괴검사학회지
• /
• 제35권6호
• /
• pp.381-388
• /
• 2015

The speed and oscillation directions of elastic waves propagating in the [ab0] direction of a silicon single crystal were obtained by solving Christoffel's equation. It was found that the quasi waves propagate in the off-principal axis, and hence, the directions of the phase and group velocities are not the same. The maximum deviation of the two directions was $7.2^{\circ}$. Two modes of the pure transverse waves propagate in the [110] direction with different speeds, and hence, two peaks were observed in the pulse echo signal. The amplitude ratio of the two peaks was dependent on the initial oscillating direction of the incident wave. The pure and quasi-transverse waves propagate in the [210] direction, and the oscillation directions of these waves are perpendicular to each other. The skewing angle of the quasi wave was calculated as $7.14^{\circ}$, and it was measured as $9.76^{\circ}$. The amplitude decomposition in the [210] direction was similar to that in the [110] direction, since the oscillation directions of these waves are perpendicular to each other. These results offer useful information in measuring the crystal orientation of the silicon single crystal.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.353-357
• /
• 2007

본 연구의 목표는 고 에너지원이 고 출력 펄스 레이저를 이용하여 금속 표면에서 발생하는 충격파를 분석하고 이를 다른 분야에 적용하는 것이다. 금속 표면 일정 단면에 펄스 레이저를 조사시키면 충격파가 발생하며 이 충격파는 음향 임피던스에 의해 레이저가 조사된 반대 방향으로 극 초음속(4000m/s 이상)으로 매우 짧은 시간동안 진행하며 다른 표면에서도 고 에너지에 의해 충격파가 발생한다. 이와 함께 얇은 금속은 순간 탄성변형을 일으킨다. 짧은 시간에 발생하는 모든 현상은 ICCD카메라를 통해 확인 할 수 있다. 이 실험의 목적은 고 에너지에 의해 발생한 충격파를 이용하여 미립자를 매우 빠른 속도로 가속하는데 있다.

• 설비공학논문집
• /
• 제18권1호
• /
• pp.17-23
• /
• 2006

This study is to investigate the pressure wave characteristics and the maximum pressure rise generated by instantaneous valve closure at the end of the straightening polybutylene piping system. Experiments were conducted under the following conditions: initial pressure $1\~5$ bar, flow velocity $\~0.5-3.0m/s$ and water temperature $25^{\circ}C$. Results indicated that the peak pressure generated by quick valve closure reached Joukowsky's value. We also found that the maximum pressure rise and the pressure history depended on not only initial steady pressure but also flow velocity.

• 소음진동
• /
• 제11권2호
• /
• pp.346-353
• /
• 2001

In this study dynamic characteristic of catenary system that supplies electrical power to KTX Korean high-speed trains are investigated. A simulation program based on 3-span and 6-span finite element models of the catenary is developed. The influences of the various design parameters on the dynamic responses of the catenary are determined. The main design parameters include tension on the contact and messenger wires and the stiffness of the droppers connecting the two wires. The vibrational responses are primarily determined by the reflections of the propagating wave, and the dropper stiffness is found to be the dominant factor that influences overall dynamic characteristics of the catenary.

• 설비공학논문집
• /
• 제12권7호
• /
• pp.697-702
• /
• 2000

This study is to investigate the pressure wave characteristics and the maximum pressure rise generated by instantaneous valve closure at the end of the straightening copper piping system. Experiments were conducted under the following conditions : initial pressure 1~5 bar, flow velocity 0.6~3.0 m/s and water temperature $20^{\circ}C$ . Results indicated that the peak pressure generated by quick valve closure reached Joukowsky's value. And we also found that the maximum pressure rise and the pressure history were depended on not only closing time but also flow velocity.

• 천문학회보
• /
• 제42권1호
• /
• pp.31.1-31.1
• /
• 2017

Spiral structure in disk galaxies is modeled with ncollisionless N-body simulations including live disks, halos, and bulges with a range of masses. Two of these simulations make long-lasting and strong two-arm spiral wave modes that last for about 5 Gyr with constant pattern speed. These two had a light stellar disk and the largest values of the Toomre Q parameter in the inner region at the time the spirals formed, suggesting the presence of a Q-barrier to wave propagation resulting from the bulge. The relative bulge mass in these cases is about 10%. Models with weak two-arm spirals had pattern speeds that followed the radial dependence of the Inner Lindblad Resonance. In addition to these, we also report a few more cases where two-armed spirals are developed and are maintained for a several rotation time scales.