• 산업기술연구
• /
• 제31권B호
• /
• pp.81-90
• /
• 2011

Centrifuge modeling and numerical analysis on works of breakwater construction were performed to investigate the behavior of caisson type of breakwater and foundation treated with the method of DCM (Deep Cement Mixing) under the condition of wave action in field. In centrifuge modeling, construction sequence of breakwater caisson such as preparation of ground, treatment of DCM, installation of rubble mound, placement of breakwater caisson and lateral loading on the breakwater due to wave action were reconstructed. Lateral movement of model breakwater and ground reaction in the vertical direction were monitored during test. Stress concentration ratio between the untreated ground and the treated ground with DCM was evaluated from measurement of vertical stresses on each ground. Numerical analysis with the software of PLAXIS was carried to compare with Results of centrifuge model test. It was found that stability of model breakwater was maintained during stage of construction and the compared results about stress concentration ratio were in relatively good agreements.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2002년도 하계 학술대회 논문집
• /
• pp.424-431
• /
• 2002

마이크로파 주파수는 일반적으로 1㎓-30㎓ 정도로서 주파수가 매우 높기 때문에 도체뿐만 아니라 절연체와 공기 중에서도 전류가 흐르는 성질을 갖는다. 자유공간에서의 마이크로파를 전자파라고도 하며 그 속도는 빛의 속도와 동일하며 자유공간에서 1cm-30cm 파장 범위를 가지므로 센티파라고도 한다. 전자방사(electromagnetic radiation)은 공간을 통하여 시간에 따라 변하는 전자계(electric and magnetic field)에 의한 에너지의 전파(propagation)이며 파동이론과 (wave theory)와 미립자이론(corpuscular theory)에 의해 해석될 수 있다. 전자파 이론(electromagnetic wave theory)의 기초는 1864년 Maxwell이 전자기 현상에 관하여 지배방정식을 수립함으로써 정립되었으며 1888년 Hertz에 의해 마이크로파의 존재가 실험적으로 증명되었다. 이후 마이크로파 기술은 2 차 세계대전을 거치면서 크게 발전하였으며 초기의 레이더 및 통신 등과 같은 군용 기술에서 마이크로파 건조 및 센싱과 같은 산업응용 기술로 발전하게 되었다. 특히 마이크로파 센서기술 및 가열기술은 농업 및 식품분야에 응용되어 마이크로파 응용제품을 선보이게 되었다. (중략)

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.508-508
• /
• 2012

CST microwave studio is used to simulate the plasma profile of the 450mm CCP source. Standing wave effect becomes important at the high frequency as the electrode radius increases. To solve plasma non-uniformity problem, we designed multi electrode chamber to decreasing standing wave effect. Simulation showed the ratio of input power of each electrode is related with electric field strength. The multi electrode was constructed and measured by 2D probe arrays using floating harmonic method. Uniformity of 450 mm CCP was changed by the ratio of input power of each electrode. We described this dependence with circuit model.

• 한국해양공학회지
• /
• 제7권1호
• /
• pp.81-91
• /
• 1993

Studies on the flow pattern due to reclamation in the Myunggi-Nocksan region are carried out based on field observations and numerical experiments. Serial time series measurement of current, temperature and salinity were conducted for 1 tidal period at intervals of 1 hour from surface to bottom on station located at 128.deg. 54' 44" E, 35.deg. 01' 04" N in April and June 1992. Surface current opposite to the subsurface current causes turbulent mixing to make homogeneous salinity pattern in vertical section. Reclamation has little effect on the wave pattern and flow patterns are also nearly similar except on the nearby region of reclamation where flow speed somewhat weakened.

• 대한전자공학회논문지
• /
• 제7권2호
• /
• pp.13-20
• /
• 1970

진행파형 메이저에 사용할 수 있는 테이프 메안더라인의 지연방정식을 전자계의 쌍대성에 의하여 유도하였다. 프린트동판을 포토칭하여 메안더라인을 제작하였으며, 메안더라인의 공극폭, 테이프폭, 회로폭의 변화에 따른 지연곡선의 변화를 상위브릿지 방법으로 측정하여 이론곡선과 비교고찰하였다.

• The Journal of the Acoustical Society of Korea
• /
• 제18권2E호
• /
• pp.18-23
• /
• 1999

This paper proposes a method of separately determining three intrinsic mechanical parameters of an unknown object in the framework of ultrasound inverse scattering tomography. Those parameters are the speed of sound, density, and absorption whose values are given as the solution of an inhomogeneous Helmholtz wave equation. The separate reconstruction method is mathematically formulated, the integral equations are discretized using the sinc basis functions, and the Newton-Raphson method is adopted as a numerical solver in a measurement configuration where the object is insonified by an incident plane wave over 360˚ and the scattered field is measured by detectors arranged in a rectangular fashion around it. Two distinct frequencies are used to separate each parameter of three Gaussian objects that are either located at the same position or separately from each other. Computer simulation results show that the separate reconstruction method is able to separately reconstruct the three mechanical parameters. The absorption parameter turns out to be a little difficult to reconstruct as compared with the other two parameters.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.24-29
• /
• 2012

$(TMTSF)_2BF_4$ containing non-centrosymmetric anions is well known to exhibit a metal insulator transition around 37 K by ordering of the anions with a $q_2$=(1/2, 1/2, 1/2) wave vector. We established pressure-temperature phase diagram of the $(TMTSF)_2BF_4$ compound and showed that it can belong to the general phase diagram of the $(TMTSF)_2X$ family. Application of hydrostatic pressure decreases the anion ordering transition temperature and the superconducting state is finally stabilized below 3.77 K under 7.7 kbar. Magnetoresistance measurement on the $(TMTSF)_2BF_4$ under 7.8 kbar is performed but neither the field-induced spin-density-wave state nor the rapid oscillation is observed up to 9 T.

• Smart Structures and Systems
• /
• 제22권4호
• /
• pp.481-493
• /
• 2018

Ultrasonic guided waves have attracted increasing attention for non-destructive testing (NDT) and structural health monitoring (SHM) of bridge cables. They offer advantages like single measurement, wide coverage of acoustical field, and long-range propagation capability. To design defect detection systems, it is essential to understand how guided waves propagate in cables and how to select the optimal excitation frequency and mode. However, certain cable characteristics such as multiple wires, anchorage, and polyethylene (PE) sheath increase the complexity in analyzing the guided wave propagation. In this study, guided wave modes for multi-wire bridge cables are identified by using a semi-analytical finite element (SAFE) technique to obtain relevant dispersion curves. Numerical results indicated that the number of guided wave modes increases, the length of the flat region with a low frequency of L(0,1) mode becomes shorter, and the cutoff frequency for high order longitudinal wave modes becomes lower, as the number of steel wires in a cable increases. These findings were used in design of transducers for defect detection and selection of the optimal wave mode and frequency for subsequent experiments. A magnetostrictive transducer system was used to excite and detect the guided waves. The applicability of the proposed approach for detecting and locating wire breakages was demonstrated for a cable with 37 wires. The present ultrasonic guided wave method has been found to be very responsive to the number of brokenwires and is thus capable of detecting defects with varying sizes.

• 한국산학기술학회논문지
• /
• 제10권9호
• /
• pp.2535-2544
• /
• 2009

뇌파연구는 비교적 안전하게 뇌상태에 관한 다양한 정보를 제공한다. 상담자나 피검자는 뇌파의 측정, 분석, 관리 등 일련의 과정에 대해 편리하게 사용자 TCO를 절감할 수 있어야 하고, 원하는 정보에 실시간 접근이 가능해야 한다. 기존 환경이 전문가의 판단에 따른 수작업 형태였다면, 본 논문이 제안한 시스템은 3-Tier 클라이언트/서버 IT기 술 및 BQT를 포함하는 뇌파기술을 융합하고 최적화시킨 스마트 뇌파케어시스템이다. 이 시스템은 편리한 웹 인터페이스를 통해 전 과정을 완전히 자동화하여 실시간서비스를 실현하였다. 본 연구로 개발된 이 시스템은 현재, 필드에서 서비스를 진행하고 있으며, DB에 수집된 자료는 연구자들에게 임상연구의 용도로 제공되고 있다.

• 전기전자학회논문지
• /
• 제7권2호
• /
• pp.218-222
• /
• 2003

전자파 방사 및 측정 시험설비로 표준 시험장인 야외시험장을 사용하고 있으나 시험장 구축의 어려움으로 이를 대체할 수 있는 대용시험장을 사용하여 측정시험을 할 수 있도록 하고 있다. 본 논문에서는 최적화된 측정시스템을 구성하기 위한 대용시험시설인 GTEM CELL(Gigahertz Transverse Electro Magnetic Cell)의 구조분석 및 설계를 하기 위하여 내부도체(Septum)의 넓이 및 두께 변화에 따른 내부도체의 특성임피던스 변화를 살펴보았다.