DOI QR코드

DOI QR Code

Ultrasonic guided wave approach incorporating SAFE for detecting wire breakage in bridge cable

  • Zhang, Pengfei (Institute of Advanced Manufacturing Engineering, Zhejiang University) ;
  • Tang, Zhifeng (Institute of Advanced Digital Technologies and Instrumentation, Zhejiang University) ;
  • Duan, Yuanfeng (College of Civil Engineering and Architecture, Zhejiang University) ;
  • Yun, Chung Bang (College of Civil Engineering and Architecture, Zhejiang University) ;
  • Lv, Fuzai (Institute of Advanced Manufacturing Engineering, Zhejiang University)
  • Received : 2018.04.11
  • Accepted : 2018.06.20
  • Published : 2018.10.25

Abstract

Ultrasonic guided waves have attracted increasing attention for non-destructive testing (NDT) and structural health monitoring (SHM) of bridge cables. They offer advantages like single measurement, wide coverage of acoustical field, and long-range propagation capability. To design defect detection systems, it is essential to understand how guided waves propagate in cables and how to select the optimal excitation frequency and mode. However, certain cable characteristics such as multiple wires, anchorage, and polyethylene (PE) sheath increase the complexity in analyzing the guided wave propagation. In this study, guided wave modes for multi-wire bridge cables are identified by using a semi-analytical finite element (SAFE) technique to obtain relevant dispersion curves. Numerical results indicated that the number of guided wave modes increases, the length of the flat region with a low frequency of L(0,1) mode becomes shorter, and the cutoff frequency for high order longitudinal wave modes becomes lower, as the number of steel wires in a cable increases. These findings were used in design of transducers for defect detection and selection of the optimal wave mode and frequency for subsequent experiments. A magnetostrictive transducer system was used to excite and detect the guided waves. The applicability of the proposed approach for detecting and locating wire breakages was demonstrated for a cable with 37 wires. The present ultrasonic guided wave method has been found to be very responsive to the number of brokenwires and is thus capable of detecting defects with varying sizes.

Keywords

Acknowledgement

Supported by : Natural Science Foundation of China, Science and Technique Plans of Zhejiang Province

References

  1. Bartels, K.A., Kwun, H. and Hanley, J.J. (1996), "Magnetostrictive sensors for the characterization of corrosion in rebars and prestressing strands", Nondestruct. Eval. Bridge. Highways, 2946, 40-50.
  2. Bartoli, I., Marzani, A., Lanza Di Scalea, F. and Viola, E. (2006), "Modeling wave propagation in damped waveguides of arbitrary Cross-Section", J. Sound Vib., 295(3), 685-707. https://doi.org/10.1016/j.jsv.2006.01.021
  3. Beena, K., Shruti, S., Sandeep, S. and Naveen, K. (2017), "Monitoring degradation in concrete filled steel tubular sections using guided waves", Smart Struct. Syst., 19(4), 371-382. https://doi.org/10.12989/sss.2017.19.4.371
  4. Cho, S., Jo, H., Jang, S., Park, J., Jung, H., Yun, C., Spencer Jr, B.F. and Seo, J. (2010), "Structural health monitoring of a cable-stayed bridge using wireless smart sensor technology: data analyses", Smart Struct. Syst., 6(5-6), 461-480. https://doi.org/10.12989/sss.2010.6.5_6.461
  5. Ditri, J.J. and Rose, J.L. (1992), "Excitation of guided elastic wave modes in hollow cylinders by applied surface tractions", J. Appl. Phys., 72(7), 2589-2597. https://doi.org/10.1063/1.351558
  6. Dorvash, S., Pakzad, S.N. and LaCrosse, E.L. (2014), "Statistics based localized damage detection using vibration response", Smart Struct. Syst., 14(2), 85-104. https://doi.org/10.12989/sss.2014.14.2.085
  7. Gazis, D.C. (1959), "Three-dimensional investigation of the propagation of waves in hollow circular cylinders. I. Analytical foundation", J. Acoust. Soc. Am., 31(5), 568-573. https://doi.org/10.1121/1.1907753
  8. Giurgiutiu, V., Reynolds, A. and Rogers, C.A. (1999), "Experimental investigation of E/M impedance health monitoring for spot-welded structural joints", J. Intel. Mat. Syst. Str., 10(10), 802-812. https://doi.org/10.1106/N0J5-6UJ2-WlGV-Q8MC
  9. Hayashi, T., Song, W.J. and Rose, J.L. (2003), "Guided wave dispersion curves for a bar with an arbitrary Cross-Section, a rod and rail example", Ultrasonics, 41(3), 175-83. https://doi.org/10.1016/S0041-624X(03)00097-0
  10. Huynh, T. and Kim, J. (2016), "Compensation of temperature effect on impedance responses of PZT interface for prestressloss monitoring in PSC girders", Smart Struct. Syst., 17(6), 881-901. https://doi.org/10.12989/sss.2016.17.6.881
  11. Jang, S., Jo, H., Cho, S., Mechitov, K., Rice, J.A., Sim, S., Jung, H., Yun, C., Spencer Jr., B.F. and Agha, G. (2010), "Structural health monitoring of a cable-stayed bridge using smart sensor technology: Deployment and evaluation", Smart Struct. Syst., 6(5-6), 439-459. https://doi.org/10.12989/sss.2010.6.5_6.439
  12. Jiles, D.C. (1995), "Theory of the magnetomechanical effect", J. Phys. D: Appl. Phys., 28(8), 1537. https://doi.org/10.1088/0022-3727/28/8/001
  13. Kim, J., Swartz, A., Lynch, J.P., Lee, J. and Lee, C. (2010), "Rapid-to-deploy reconfigurable wireless structural monitoring systems using extended-range wireless sensors", Smart Struct. Syst., 6(5-6), 505-524. https://doi.org/10.12989/sss.2010.6.5_6.505
  14. Kim, Y.Y. and Kwon, Y.E. (2015), "Review of magnetostrictive patch transducers and applications in ultrasonic nondestructive testing of waveguides", Ultrasonics, 62, 3-19. https://doi.org/10.1016/j.ultras.2015.05.015
  15. Kirby, R. (2008), "Modeling sound propagation in acoustic waveguides using a hybrid numerical method", J. Acoust. Soc. Am., 124(4), 1930-1940. https://doi.org/10.1121/1.2967837
  16. Legg, M., Yucel, M.K., Kappatos, V., Selcuk, C. and Gan, T. (2015), "Increased range of ultrasonic guided wave testing of overhead transmission line cables using dispersion compensation", Ultrasonics, 62, 35-45. https://doi.org/10.1016/j.ultras.2015.04.009
  17. Lim, H.J., Kim, Y., Sohn, H., Jeon, I. and Liu, P. (2017), "Reliability improvement of nonlinear ultrasonic modulation based fatigue crack detection using feature-level data fusion", Smart Structu. Syst., 20(6), 683-696. https://doi.org/10.12989/SSS.2017.20.6.683
  18. Liu, G.R. and Achenbach, J.D. (1994), "A strip element method for stress analysis of anisotropic linearly elastic solids", J. Appl. Mech., 61(2), 270-277. https://doi.org/10.1115/1.2901440
  19. Loveday, P.W. (2012), "Guided wave inspection and monitoring of railway track", J. Nondestruct. Eval., 31(4), 303-309. https://doi.org/10.1007/s10921-012-0145-9
  20. Makar, J., and Desnoyers, R. (2001), "Magnetic field techniques for the inspection of steel under concrete cover", NDT & E Int., 34(7), 445-456. https://doi.org/10.1016/S0963-8695(00)00051-7
  21. Min, J., Yun, C. and Hong, J. (2016), "An electromechanical impedance-based method for tensile force estimation and damage diagnosis of post-tensioning systems", Smart Struct. Syst., 17(1), 107-122. https://doi.org/10.12989/sss.2016.17.1.107
  22. Mu, J. and Rose, J.L. (2008), "Guided wave propagation and mode differentiation in hollow cylinders with viscoelastic coatings", J. Acoust. Soc. Am., 124(2), 866-874. https://doi.org/10.1121/1.2940586
  23. Nucera, C. (2012), "Propagation of nonlinear waves in waveguides and application to nondestructive stress measurement", Ph.D. Dissertation, University of California, San Diego, United States.
  24. Park, G., Sohn, H., Farrar, C.R. and Inman, D.J. (2003), "Overview of piezoelectric impedance-based health monitoring and path forward", Shock Vib. Digest, 35(6), 451-464. https://doi.org/10.1177/05831024030356001
  25. Park, H., Sohn, H., Yun, C., Chung, J. and Kwon, I. (2010), "A wireless guided wave excitation technique based on laser and optoelectronics", Smart Struct. Syst., 6(5-6), 749-765. https://doi.org/10.12989/sss.2010.6.5_6.749
  26. Park, S., Grisso, B.L., Inman, D.J. and Yun, C. (2007), "MFCbased structural health monitoring using a miniaturized impedance measuring chip for corrosion detection", Res. Nondestruct. Eval., 18(2), 139-150. https://doi.org/10.1080/09349840701279937
  27. Puthillath, P. and Rose, J.L. (2010), "Aircraft bond repair patch inspection using ultrasonic guided waves", Review of Progress in Quantitative Nondestructive Evaluation, San Diego, California, USA, July,
  28. Qin, L., Ren, H., Dong, B. and Xing, F. (2015), "Development of technique capable of identifying different corrosion stages in reinforced concrete", Appl. Acoust., 94, 53-56.
  29. Rose, J.L., Avioli, M.J., Mudge, P. and Sanderson, R. (2004), "Guided wave inspection potential of defects in rail", NDT & E Int., 37(2), 153-161. https://doi.org/10.1016/j.ndteint.2003.04.001
  30. Rose, J.L. and Royer, R.L. (2008), "A guided wave health monitoring approach for civil structures", Proceedings of the 26th IMAC: Conference and Exposition on Structural Dynamics 2008, Orlando, Florida, USA, February,
  31. Shull, P.J. (2016), Nondestructive Evaluation: Theory, Techniques, and Applications, CRC press, Boca Raton, Florida, USA.
  32. Sohn, H., Lim, H.J., DeSimio, M.P., Brown, K. and Derriso, M. (2014), "Nonlinear ultrasonic wave modulation for online fatigue crack detection", J. Sound Vib., 333(5), 1473-1484. https://doi.org/10.1016/j.jsv.2013.10.032
  33. Treyssede, F. (2008), "Elastic waves in helical waveguides", Wave Motion, 45(4), 457-470. https://doi.org/10.1016/j.wavemoti.2007.09.004
  34. Treyssede, F. (2016), "Dispersion curve veering of longitudinal guided waves propagating inside prestressed Seven-Wire strands", J. Sound Vib., 367, 56-68. https://doi.org/10.1016/j.jsv.2015.12.050
  35. Wang, H., Tao, T., Li, A. and Zhang, Y. (2016), "Structural health monitoring system for Sutong Cable-stayed Bridge", Smart Struct. Syst., 18(2), 317-334. https://doi.org/10.12989/sss.2016.18.2.317
  36. Yim, J., Wang, M.L., Shin, S.W., Yun, C., Jung, H., Kim, J. and Eem, S. (2013), "Field application of elasto-magnetic stress sensors for monitoring of cable tension force in cable-stayed bridges", Smart Struct. Syst., 12(3-4), 465-482. https://doi.org/10.12989/sss.2013.12.3_4.465
  37. Zhang, X., Tang, Z., Lv, F. and Yang, K. (2017), "Scattering of torsional flexural guided waves from circular holes and Crack-Like defects in hollow cylinders", NDT & E Int., 89(7), 56-66. https://doi.org/10.1016/j.ndteint.2017.03.007
  38. Zima, B. and Rucka, M. (2017), "Non-Destructive inspection of ground anchors using guided wave propagation", Int. J. Rock Mech. Min. Sci., 94, 90-102.

Cited by

  1. Numerical and Experimental Investigation of Guided Wave Propagation in a Multi-Wire Cable vol.9, pp.5, 2019, https://doi.org/10.3390/app9051028
  2. A Guided Wave Transducer with Sprayed Magnetostrictive Powder Coating for Monitoring of Aluminum Conductor Steel-Reinforced Cables vol.19, pp.7, 2019, https://doi.org/10.3390/s19071550