• 한국해안해양공학회지
• /
• 제15권3호
• /
• pp.159-166
• /
• 2003

본 연구에서는 천해 파랑 계산에 널리 사용되어지고 있는 확장형 완경사 방정식과 계산 효율은 같게 유지하면서 Laplace방정식을 직접 풀 수 있는 유한 요소 모형에 대해서 연구하였다. 기존의 확장형 완경사 방정식을 사용하는 경우와 같은 계산효율을 유지하기 위하여 파동장을 수심방향으로 1층인 유한요소로 나누고, 요소내의 포텐셜을 수면에 위치한 절점에 대한 포텐셜만으로 표시하도록 한 후, Galerkin 기법을 적용하여 수치모형을 구성하였다. 요소 내 수평방향에 대해서는 통상의 보간함수를 채택하였으며, 수심방향에 대해서는 진행파의 수심방향 거동인 함수를 사용하여 보간함수를 구성하였다. 모형의 개발은 우선 연직 2차원 문제를 대상으로 하였다. 개발된 모형의 검증을 위하여 연직 2차원에서의 파랑 반사 및 전달문제에 적용한 결과, 개발된 유한 요소 모형은 계산상의 효율면에서나 해의 정확도 면에서 기존의 확장형 완경사 방정식에 기초한 모형과 같은 수준을 보임을 확인하였다.

• 한국해안해양공학회지
• /
• 제8권2호
• /
• pp.146-150
• /
• 1996

파랑은 해안 구조물의 안정성 및 지형 변화 분석을 위해서 가장 중요한 동역학적 요소의 하나로서, 해안공학분야에서 매우 중요하게 취급된다. 그러나 바람에 의해 발생한 파랑은 매우 불규칙한 형태를 갖고 있으며, 해저 지형과 수심이 변하게 심하게 변하는 천해역으로 전파할 때 굴절, 회절 그리고 천수 효과에 의하여 변형된다. 최근 Vincent등(1989)은 수중 타원형 천퇴에서 단순파 및 불규칙파의 변형에 대한 수리모형 실험을 보고하였다. 이들은 단순파와 불규칙파의 경우 천퇴에서의 굴ㆍ회절 복합 현상에 의한 파랑변형 형태가 판이하게 다르다는 것을 발견하였다. 수년동안 불규칙파 변형에 대한 이론 및 수치해석 연구가 계속되어, 파랑변형에 대한 이론 연구 및 수리 모형 연구는 상당히 발전되었으나, 실제 현상을 예측하기 위해서는 현장관측결과와 수치해석에 의한 해와의 비교 등이 필요하다. 본 연구에서는 여러 종류의 기기를 이용하여 영일만에서의 입사파와 변형된 파를 현장 관측하고, Chae와 Jeong(1992)의 타원형 모형을 이용하여 수중 천퇴 배후에서 불규칙파 변형에 대한 수치모형 실험을 실시하였다. 이들 2종류의 비교 결과가 잘 일치함으로써, 불규칙파 수치모형의 현장 적용성을 입증하였다.

• 호남수학학술지
• /
• 제39권1호
• /
• pp.27-40
• /
• 2017

In this paper, we construct exact traveling wave solutions of various kind of partial differential equations arising in mathematical science by the system technique. Further, the $Painlev{\acute{e}}$ test is employed to investigate the integrability of the considered equations. In particular, we describe the behaviors of the obtained solutions under certain constraints.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.576-585
• /
• 2016

The current control methods of Y-connected 7 Phase BLDC motor are sine wave current control and square wave control. The sine wave current control method needs dq axis transformation of $7{\times}7$ matrix for current control and very complex. Also this method is not suitable for multi Phase BLDC motor of trapezoidal back emf wave. Therefore, in Y connected multi phase BLDC motor, the square wave current control methods are required. Generally, in the 3Phase BLDC system, Average current control method is used for current control. The average current is obtained that the summation of absolute value of each phase current magnitude is divided by the number of conduction phase. However, if average current control method is applied to multi-phase system, there is a problem that each phase currents are different. This problem affects unbalance of each phase torque and fluctuation of total torque. This paper proposed each phase current control method of Y connected 7Phase BLDC system. Proposed method is used for PI controller of each phase for each phase current control. This method can perfect square wave current control. Also, configuration of the method is easier than DQ axis transformation. Proposed method is verified through simulation and experiments.

• Journal of Mechanical Science and Technology
• /
• 제19권8호
• /
• pp.1611-1620
• /
• 2005

This paper shows the use of wavelet transformation combined with inverse acoustics to reconstruct the surface velocity of a noise source. This approach uses the boundary element analysis based on the measured sound pressure at a set of field points, the Helmholtz integral equations and wavelet transformation for reconstructing the normal surface velocity field. The reconstructed field can be diverged due to the small measurement errors in the case of nearfield acoustic holography (NAH) using an inverse boundary element method. In order to avoid this instability in the inverse problem, the reconstruction process should include some form of regularization for enhancing the resolution of source images. The usual method of regularization has been the truncation of wave vectors associated with small singular values, although the order of an optimal truncation is difficult to determine. In this paper, a wavelet transformation is applied to reduce the computation time for inverse acoustics and to enhance the reconstructed vibration field. The computational speed-up is achieved, with solution time being reduced to $14.5\%$.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.303-308
• /
• 2003

In this paper, wave numerical modeling was experimented for the analysis of impact factors for the wave transmission as the incident wave and topographic conditions in the narrow channel sea. Recently, Although the results of many researcher for the wave modelling, numerical equations have limited to simulation of wave transformation effects. Despite of thispresent problems, the models was used to design the coastal structures in barrow channel sites. Finally, this paper estimated the wave model(mild slope eq. model) as the analysis of the wave energy transmission according to changing of impact factors(width of channel, bottom slope in channel, incident wave angle, wave period). As the results of numerical experiment, the major impact factors which influence to wave energy transmission were the width of channel and incident wave direction. But in the case that the width of channel is larger than 3L(L=Length of wave), the reduction of wave energy was small.

• 산업기술연구
• /
• 제17권
• /
• pp.261-275
• /
• 1997

The objective of this paper is to develop two numerical model for predicting the wave height with set-up/down near the surfzone on a arbitrary beach profile. Two wave models, regular wave model and random wave model, are based on the energy flux equation with the energy dissipation effects. The developed numerical models are verified by comparison of numerical results with analytical solutions that are derived under the simple conditions. The characteristics of parameters included in each model are then investigated and decided to the range of behaviour by the sensitivity analysis. For sensitivity analysis, we carried out total 46 laboratory tests. Finally, the developed numerical models are applied to the field where the wave height near the surfzone has been measured. From the applications of numerical models, it is concluded that the developed numerical models may accurately predict the wave height with the set-up/down near the surfzone on a arbitrary beach profile.

• 동력기계공학회지
• /
• 제3권3호
• /
• pp.14-21
• /
• 1999

The wave nature of heat conduction has been developed in situations involving extreme thermal gradients, very short times, or temperatures near absolute zero. Under the excitation of a periodic surface heating in a finite medium, the hyperbolic and parabolic heat conduction equations and the damped wave equations in heat flux are presented for comparative analysis by using the Green's function with the integral transform technique. The Kummer transformation is also utilized to accelerate the rate of convergence of these solutions. On the other hand, the temperature distributions are obtained through integration of the energy conservation law with respect to time. For hyperbolic heat conduction, the heat flux distribution does not exist throughout all the region in a finite medium within the range of very short times(${\xi}<{\eta}_l$). It is shown that due to the thermal relaxation time, the hyperbolic heat conduction equation has thermal wave characteristics as the damped wave equation has wave nature.

• 한국해양공학회지
• /
• 제16권2호
• /
• pp.1-5
• /
• 2002

In the past, ports have been mainly developed in natural harbors but nowadays ports are built wherever they can be economically justified. Therefore, construction of breakwater in area that establishment of structure is disadvantageous is risen according to the change of conditions to the location for ports. In case of building gravity breakwater in such point, need that plane shapes of more reasonable section permitting wave overtopping is necessary. One of the earliest methods for solving unsteady incompressible flow including free surfaces is the MAC(Marker And Cell) method by Harlow and Welch (1965). Recently. VOF(Volume Of Fluid) method to improve several drawbacks of MAC method is suggested by Hirt and Nichols(1981) and utilized extensively in fields of hydrodynamics. Wave overtopping phenomenon is simulated including wave breaking for permeable breakwater by numerical analysis and investigated features of wave overtopping behind structure using VOF method.

• 한국해안·해양공학회논문집
• /
• 제22권3호
• /
• pp.163-170
• /
• 2010

평면파 근사식에 기초한 지형에 의한 파랑변형 모형인 산란체법과 변환행렬법을 비교하여 특성을 분석하였다. 산란체법의 결과가 기존 엄밀해에 보다 근접하고 내재한 물리현상을 보다 명확히 설명하는 것으로 평가된다. 이들은 해석해로 계산이 빠르고 용이하며 지형이 비교적 단순한 경우에는 상당한 정밀도를 보인다.