• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.1
• /
• pp.178-184
• /
• 2007

In the present work, the vermicomposting index was investigated using leakage water from sludge to develop the process of mechanization and automation in the earthworm-cast treatment. The in situ sewage sludge was used batch and continuous experiments. Due to different treatment processes, the physico-chemical characteristics of liquid extracted from sludge was the similar change pattern. However, some items, such as Oxidation Reduction Potential (ORP), pH, Electrical Conductivity (EC) and $NH_3-N$, showed the distinct changes between pre- and post-vermicomposting. Also, The ORP and EC were the best parameters for the vermicomposting index. These results offered that the present vermicomposting technology was an actual earthworm-cast treatment.

• Journal of Korean Society on Water Environment
• /
• v.21 no.1
• /
• pp.34-39
• /
• 2005

The performance of elutriated acid fermentation with slurry-type piggery waste was investigated, especially to evaluate the effects of temperature and pre-treatment. In the first phase, the acid elutriation reactor with piggery waste after centrifugation operated at both mesophilic and thermophilic conditions to evaluate the effect of temperature. Solubilization yield($gVFAs/gSCOD_{prod.}$) and acidification rate($gVFAs/gSCOD_{prod.}$) in the thermophilic digestion were 0.45 and 0.55, which were higher than those of the mesophilic digestion, 0.25 and 0.45. In addition, the acid elutriation reactor at thermophilic temperature is more effective in removing e-coli. In the second phase, the acid elutriation reactor was fed with piggery waste before centrifugation. With piggery wastes before centrifugation, the solubilization yield and the acidificaton rate were 0.40 and 0.80, respectively, which were higher than the rates using piggery waste after centrifugation at both mesophilic and thermophilic conditions. The higher sludge volume reduction of 80% benefits sludge management. Furthermore, economical advantages can be achieved by removing the pre-treatment process, such as centrifugation. Consequently, the treatment with piggery waste before centrifugation proved to be effective. Also, the optimum temperature condition was estimated at mesophilic or thermophilic conditions, considering solubilization yields and acidification rates, though the system should be heated.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.1
• /
• pp.103-108
• /
• 2000

As it is forbidden to landfill the organic sludge generated in water treatment plant from 2001, disposal coast of the sludge will be highly incersed. Therefore, This Study was conducted to recyle the sludge of water supply plant as inorganic fertilizer for agricultural areas and forests using the Chemical and the Hydrothermal methods. As the result, we could manufacture sutiable inorganic fertilizer, removing organics and harmful heavy metals by the Chemical and the Hydrothermal method.

• KSBB Journal
• /
• v.26 no.5
• /
• pp.407-411
• /
• 2011

Microbial fuel cell (MFC) wes enriched using sludge in wastewater treatment. The microbial community of activated sludge and enriched MFC were analyzed by FISH (fluorescent in situ hybridization) and 16S rDNA sequencing. Bacteroidetes group were pre-dominant in activated sludge by FISH. ${\alpha}$ group, ${\gamma}$ group and Acintobacter group were dominant and they were similar to distribution. The average value of 10 peak of MFC is 0.44C. When MFC wase enriched by sludge, ${\gamma}$-Proteobacteria, Plantomycetes group increased 70% and 60%, respectively. In results of 16S rDNA sequencing, Sphiringomonas sp. was comprised in ${\alpha}$ proteobacteria and Enterobacter sp., Klebsiella sp., Acinetobacter sp., Bacillus sp. were comprised in ${\gamma}$ proteobacteria and Chryseobacterium sp. was comprised in Flavobacteria were isolated from sludge.

• Membrane and Water Treatment
• /
• v.5 no.1
• /
• pp.1-14
• /
• 2014

A pilot-scale hybrid membrane bioreactor (HMBR) for real municipal wastewater treatment was developed by adding biofilm carriers into a conventional membrane bioreactor, distribution and dynamic changes of the extracellular polymeric substances (EPS) and their roles in membrane fouling were investigated. The results showed that the concentrations of loosely bond EPS (LB-EPS) and tightly bond EPS (TB-EPS) in activated sludge, carrier biofilm and sludge cake layer have been increased significantly with the running time of HMBR, during operation of the HMBR, EPS demonstrated positive correlations with membrane fouling. Compared to TB-EPS, LB-EPS showed more significant correlations with sludge physical properties and specific resistance to filtration (SRF) in HMBR, and thus demonstrated that LP-EPS have a stronger potential of fouling than TB-EPS. It was also found that a lower organic loading in HMBR could result a significant increase in EPS concentration, which would in turn influence membrane fouling in HMBR. This critical investigation would contribute towards a better understanding of the behavior, composition and fouling potential of EPS in HMBR operation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.42-47
• /
• 2008

For the purpose of reduction of production cost in the industrial papermaking process, the use of waste paper has been more and more increased as a fibrous raw material, and the closed system of white water became closed more than ever. "Scum" indicates the floated sludge by a flotation during primary wastewater treatment process in paper mills. If the scum is used as the raw material, it could reduce both the raw material and solid waste treatment cost with even small quantity. In this study, the element survey and the toxicity measurement was carried out for recycling scum. A load factor of stock preparation process in paper mills was measured by somerville screen. Physical properties of paper sheet containing the accepted scum from the stock of AOCC or KOCC were evaluated. The result of this study shows that recycling scum has potential to be used in paper making system. It also might be able to reduce the required energy used by the pressing or drainage process, the raw material cost, and solid waste treatment cost due to the recycling of scum.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.441-451
• /
• 2000

Sludge produced from water treatment plants contains plenty of aluminum due to addition of coagulants, polyaluminum chloride(PACI) which has been widely used in most of water treatment plants. however. the whole of PACI is imported from other countries. In this research. the effective methods for recycling PACI from sludge of water treatment plants were developed and evaluated. Aluminum chloride hexahydrate($AlCl_3{\cdot}6H_2O$) was obtained by sparging HCl gas aluminum extracted from sludge using hydrochloric acid (HCI). This aluminum chloride hexahydrate was solidified by decomposition at $180^{\circ}C$. and dissolved in water to produce PACI. The optimum extraction rate was obtained at the condition of 10 minutes of reaction time. $105^{\circ}C$ of reaction temperature. 27.65%(W/W) of HCI concentration. The KS experiment proved that manufactured aluminum chloride hexahydrate was 98.7% degree and the recycled PACI coagulants agreed with the KS standard. The optimum temperature of decomposition was $180^{\circ}C$ and the basicity of the PACI was decided upon the extent of decomposition The compared experiments between purchased coagulant and manufactured coagulant presented that both coagulants had same performance for turbidity, DOC, $UV_{254}$ absorbance. and chlorophyll-a.

• Journal of Animal Environmental Science
• /
• v.1 no.1
• /
• pp.77-82
• /
• 1995

In order to investigate the purification effects of livestock waste water, Modified Activated-Sludge Process(MASP) containing marine silica and volcanic ash-rock as the contact media and Sawdust-Soil Filter Method were used. The results obtained are as follows: 1. MASP which treated two metric tons' livestock waste water a day decreased BOD by 97.5% from 4,400.0mg/I to 108.8mg/I and SS by 98.0% from 5,335.0mg/I to 111.0mg/I. 2. MASP decreased BOD by 93.9% from 2,549.1mg/I to 156.6mg/I and SS by 96.3% from 3,521.9mg/I to 132.0mg/I when ten metric ton's livestock waste water was treated a day. 3. BOD and SS were decreased by 83.4% from 45.1mg/I to 7.5mg/I and by 83.4% from 47.5mg/I to 7.9mg/I when the supernatant layer treated by MASP was purified by Sawdust-Soil Filter Method.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.117-124
• /
• 2018

For the effective removal of phosphorus in water, a novel type of composite was prepared by combining Poly Alumiun Chloride, widely used in sewage/wastewater treatment plants, and Humic Acid particles, which are known to have phosphorus removal ability, with CI. The surface of the ferromagnetic CI particles was oxidized and activated, and then PAC and HA were synthesized to finally produce CIPAC and CIHA. CIPAC and CIHA prepared by this study showed similar results to the phosphorus removal efficiencies of PAC and HA coagulants. The novel composite has a larger weight than the conventional coagulant, and the coagulated sludge precipitates rapidly. The sludge could be easily separated in a short time if the external magnetic field was given by the ferromagnetic force of CIPAC and CIHA prepared with CI as support. Therefore, it can be concluded that if phosphorus removal is carried out using CIPAC and CIHA prepared through this study with external magnetic field, the sedimentation rate will be much faster than that of conventional coagulant. Thus it is possible to obtain a high economic benefit in the sludge recovery part.

• Membrane and Water Treatment
• /
• v.9 no.5
• /
• pp.343-351
• /
• 2018

As membrane fouling is based on various factors, it is a complex phenomenon that is hard to estimate. This study investigated membrane fouling in a thermophilic jet loop membrane bioreactor (JLMBR). With this purpose, four different empirical membrane fouling models with different sludge retention times were applied on the flow data obtained in the system. As a result of the model implementation, it was found for all sludge retention times that, standard blocking is effective in the first 1.5 hours of filtration, while cake filtration was dominant in the remaining duration. Additionally, it was observed that as the sludge retention time increases, membrane fouling rate decreases.