• Journal of the Korea Concrete Institute
• /
• v.16 no.4 s.82
• /
• pp.477-484
• /
• 2004

As a part of durability improvement of concrete-structure, penetrating water repellency of liquid type is applied to concrete surface. Besides, a related standard is made recently, but the standard has been prescribe for initial settlement state of penetrating water repellency of liquid type, to the exclusion of performance variation depending time and outdoor environment factor. For measurement of performance variation, we measured the weight of outdoor exposure specimen every regular intervals and check a measured value against a measured value of different condition specimen. Moreover, after the application of penetrating water repellent, measured a adhesive strength in tension between cement-polymer modified waterproof coatings and surface of specimen. The applied penetrating water repellent is a emulsified silicon type with a deep penetration depth. In view of the results so far achieved, the more a Quantity of application and active solid content does get, the deeper penetrating water repellency of emulsion type Penetrate get longer and supplied moisture increase in quantity, a penetrating water repellency of liquid type penetrates more deep, but a quantity of water absorption increase gradually. Perhaps this result is caused by a reduction of active solid content on concrete surface, because active ingredient is moved into the concrete by dissolution.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.26-34
• /
• 2008

Wool fabric having high moisture content were treated with fluorocarbon-based water and oil repellent finishing agents by pad-dry-cure system. Three types of finishing agents which were regular-type or nano-type were adapted to compare the surface chemical composition, water and oil repellent property, crease recovery angle, and durability to repeated laundering. From the surface chemical compositions resulted by ESCA and C1s curve-fitting, it was shown that the regular-type finishing agent were easily taken off from the finished wool fabrics after repeated laundering. On the other hand, the fluoroalkyl groups of nano-type finishing agents turned round from fabric surface to fiber internal after repeated laundering. The water repellency of the wool fabrics treated with regular-type agent had a little changes according to the treatment condition changes and sharply decreased with repeated laundering. However, these values when treated with nano-type agents increased with the concentration and cure temperature and were maintained after 20 times laundering. The wool fabrics treated with nano-type agent had a great oil repellency irrespective of treatment conditions. Furthermore, the wrinkle recovery values of the wool fabrics treated with nano-type agents were higher than those of the fabrics treated with regular-type agent and were unchanged after 20 times laundering.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.1
• /
• pp.37-42
• /
• 2019

Electrodeposited zinc layer is widely used as a sacrificial anode for a corrosion protection of steel. In this study, we modified the surface of electrodeposited zinc to have a hydrophobicity, which shows various advanced functionalities, such as anti-corrosion, anti-biofouling, anti-icing and self-cleaning, due to its repellency to liquids. Superhydrophobicity was realized on electrodeposited zinc layer with a hydrothermal treatment, creating nanostructures on the surface, and following Teflon coating. The superhydrophobic surface shows a great repellency to water with high surface tension, while liquid droplets with low surface tension easily adhered on the superhydrophobic surface. However, immiscible lubricant-impregnated superhydrophobic surface shows a great repellency to various liquids, regardless of their surface tension. Therefore, it is expected that the lubricant-impregnated surface can be an alternative of superhydrophobic surface, which have a drawback for some liquids with a low surface tension.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.781-787
• /
• 1996

Silicom oxide films with good water repellency were prepared by rf plasma-enhanced CVD (rf-PECVD) using four kinds of organosilicon compound, which had different number of methyl ($CH_3$) groups, and oxygen as gas sources. The differences in the deposition rates, film composition and film properties were studied in detail. Water repellency depended on the number of $CH_3$ groups in the organosilicon compounds and the partial pressure of oxygen in the plasma. The highest contact angle for water drops, about 95 degrees, was obtained when trimethy lmethoxy silane (TMMOS) was used. The contact angle decreased with the amount of oxygen gas introduced into the plasma. The dissociation of $CH_3$ groups by adding oxygen was comfirmed by Fourier transform infrared spectroscopy(FTIR) and X-ray photoelectron spectroscopy (XPS). The optical properties were estimated by double-beam spectroscopy and ellipsometry. The transmittance of the glass plate coated by the film prepared with tetramethoxy silane (TMOS) was about 90% and the refractive index of film was 1.44. This value was smaller than the refractive index of a glass plate(soda lime glass, refractive index is 1.515) and this film played a role of anti-refractive coating.

• Journal of the Korean Society of Visualization
• /
• v.19 no.3
• /
• pp.123-129
• /
• 2021

Many plants and animals in nature have superhydrophobic surfaces. This superhydrophobic surface has various properties such as self-cleaning, moisture collection, and anti-icing. In this study, the superhydrophobic properties of PTFE surface were treated by plasma etching. There were four important factors that changed the surface properties. Micro-sized protrusions were formed by plasma etching. The most influential parameter was RF Power. The contact angle of the pristine PTFE surface was about 113.8°. The maximum contact angle of the surface after plasma treatment with optimized parameters was about 168.1°. In this case, the sliding angle was quite small about 1°. These properties made it possible to remove droplets easily from the surface. To verify the self-cleaning effect of the surface, graphite was used to contaminate the surface and remove it with water droplets. Graphite particles were easily removed from the optimized surface compared to the pristine surface. As a result, a surface having water repellency and self-cleaning effects could be produced with optimized plasma etching parameters.

• Textile Coloration and Finishing
• /
• v.27 no.2
• /
• pp.119-125
• /
• 2015

The effects of e-beam irradiation on water-repellency and washing durability of water-repellent finished chemically-recycled PET(CR-PET) fabrics were investigated. As results, more doses of e-beam irradiation damaged the fabric surface more severely. It was thought because the high densed energy was formed, where the more e-beam was converged. The contact angle measurement showed that as the dose of e-beam irradiation increased, water wettability of the CR-PET fabric increased slightly. It was thought to be due that the surface etching by e-beam irradiation let water droplet permeate into the fabric surface better. The concentration of the water-repellent finishing agent was more important factor than curing temperature as finishing parameter. It was considered because the water-repellent finishing agent used in this study got to cure sufficiently at low temperature. Consequently, e-beam irradiation improved the washing durability of water-repellent finishing on the CR-PET fabrics.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.5
• /
• pp.577-584
• /
• 1996

Silicon oxide films with high hardness and water repellency were prepared by microwave plasma-enhanced CVD using four kind of organosilicon compound-fluoro-alkyl silane mixtures as source gases. An argon gas was used as a carrier gas for fluoro-alkyl silane. The substrate temperatures during deposition were controlled by resistant heating at a constant value between 50 and $300^{\circ}C$. The hardness of the films increased, but the deposition rate and the contact angle for a water drop decreased with increasing substrate temperature. The number of methoxy groups also affected the water repellency and hardness. The deposited films became more inorganic with increasing substrate temperature because of the thermal dissociation of reactants.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.143-144
• /
• 2002

A series of alcohols with perfluorinated segments $F(CF_2)_m(CH_2)_n-OH$, with m=8, 10 and n=4, 6, 10, were synthesized. First, the alcohols were reacted with fatty acid to produce several esters $(F(CF_2)_m(CH_2)-OOC-R$ with m=8, 10 and n=2, 4, 8,) containing perfluoro group by condensation reaction, and characterized by FT-IR, GC, and surface tension. The esters were soluble in ethyl ether, toluene, hexane, ethyl acetate, chloroform, and acetone, but insoluble in methyl alcohol, ethyl alcohol and isopropyl alcohol. Preliminary experiments on 1,2-dichloroethane solutions showed a remarkable decrease of surface tension upon addition of the esters. Also, the esters films ranged from 100 to $122^{\circ}$, depending on the structure of fatty acid esters. As the separate experiment, the water-repellency of coated paper and cotton was evaluated. As a result, the water droplet dropped in surface was not permeated for two weeks.

• Journal of Adhesion and Interface
• /
• v.15 no.4
• /
• pp.151-160
• /
• 2014

A series of terpolymers based on stearyl methacrylate (SMA), n-methyol acrylamide (n-MAM), and 2-(perfluorooctyl) ethyl acrylate (PFOEA) were synthesized by changing PFOEA contents up to 8 wt% in order to obtain optimal water-repellent properties. In addition, various contents of m-isopropenyl-${\alpha}$,${\alpha}^{\prime}$-dimethylbenzyl isocyanate (TMI) from 1 to 4 wt% were added to the above terpolymers with 4 wt% of PFOEA content. The emulsion polymerization was carried out using tridecyl alcohol (EO)7 (TDA-7) as a nonionic surfactant, alkyl dimethyl amine derivatives (ADAD) as a cationic surfactant, and 2,2'-azobis(2-amidinopropane dihydrochoride) (AAPDL) as an initiator. The synthesized copolymers were characterized by FT-IR spectroscopies, contact angle, surface energy, and water-repellency. Surface and thermal properties were analyzed by SEM, TGA, and DSC. It was found that water repellency increased with increasing the contents of PFOEA and TMI.

• Structural Engineering and Mechanics
• /
• v.86 no.1
• /
• pp.109-118
• /
• 2023

Any place where exercise is common, such as a club, sports hall, or school, is considered a place for teaching sports. When doing sports, a very safe environment for sports should be chosen. The athlete should consider the safety of sports facilities and equipment, and if there is a defect, he should refrain from exercising in these places. The safety of sports facilities is very effective in creating people's sports activities, with the benefits of staying away from physical harm, enjoying sports, and having mental peace. Everyone has the right to participate in sports and recreation and to ensure that they enjoy a safe environment. The ability to manage and solve issues that may arise plays the most critical role in creating a safe environment. The quality of construction materials used for the construction of sports facilities is of great importance. In this work, the resistance and water repellency of concrete constituents for the construction of sports buildings have been investigated by nanoscience. Nano-concrete material solves the main problem of concrete surfaces, i.e., the entry of water and humidity into the structure. It also gives it a self-cleaning ability with its water repellency. Nanoparticles are placed between pores and cover the cracks, which causes roughness in the surface structure of concrete. The high roughness of the surface of the coated concrete caused its super-hydrophobicity. In hydrophobic surfaces, the higher the contact angle, the more hydrophobic the surface will be. In order to investigate the hydrophobic properties, silica nanoparticles, silica nanoparticles, and fly ash were prepared on concrete, and their properties were analyzed.