• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.8-15
• /
• 2008

Wastewoods (logging residues) generated in Korea were used to make lignocellulosic fillers for papermaking. Lignocellulosic fillers could play great roles to increase retention efficiency and thus decrease turbidity of white water in papermaking process. In addition, lignocellulosic fillers could be used to improve physical properties of paper through their high affinity to cellulosic fibers, leading to the less use of chemical additives like retention aids. Wastewoods including Pinus densiflora and Quercus variabilis were chemically and mechanically treated for making fine particles passing through 100 mesh wire. The newly generated fillers showed larger particle size distribution than ground calcium carbonates but similar distribution to talc. In particular, pretreatment by hot water was more effective to generate smaller particle size than by alkali treatment. Lignocellulosic particles mixed with ground calcium carbonates under intense hybridizing condition greatly contributed to surface coverage of organic fillers in addition to filling to lumen and pits.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.1
• /
• pp.49-58
• /
• 2013

A selected halogenated organic contaminant, monochlorophenol was successfully degraded by photocatalytic reaction in a circulating batch system. The photocatalytic degradation in most cases follows first-order kinetics. The photocatalytic reaction rate increased in the $TiO_2$ dosage range of 0.1 g/L to 0.4 g/L, then decreased with further increase of the dosage. Also the degradation rate increased over the range of the retention time from 0.49 min. to 0.94 min., then decreased with further increase of the retention time in the circulating batch reactor. The photocatalytic activity was enhanced by addition of metal impurities, platinum(Pt) and palladium(Pd) onto the photocatalysts. The photocatalytic degradation rate increased with the increase of Pt and Pd in the content range of 0 to 2wt %, then decreased with further increase of the metal contents. Therefore the metal loading to $TiO_2$ influence the degradation rate of a halogenated organic compound by acting as electron traps, consequently reducing the electron/positive hole pair recombination rate.

• Membrane and Water Treatment
• /
• v.15 no.1
• /
• pp.41-50
• /
• 2024

Presence of hazardous dyes in water cause considerable risks to the human health and environment due to their potential toxicity and ecological disruptions. Therefore, in the present research, to suggest an alternative method for the retention of toxic Azocarmine G (ACG) dye from aqueous media, natural and H₂SO₄-modified acacia sawdust were performed for the first time as low-cost and efficient adsorbents. Based on batch experiments, it was determined that the best conditions for the developed dye retention process were an initial pH of 2.0 and an equilibrium time of 240 min. Analysis of the data using both pseudo-first order and pseudo-second order kinetic models showed that the retention of ACG onto the adsorbents predominantly occurred through chemical adsorption. Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models were employed to provide insights into the interaction between the adsorbate and adsorbent and the mechanism of the adsorption process. Maximum monolayer adsorption capacities of natural and H₂SO₄-modified acacia sawdust were determined as 28.01 and 64.90 mg g^-1, respectively by Langmuir isotherm model. Results of the study clearly indicated that the modification of acacia sawdust with H₂SO₄ leads to a substantial increase in the adsorption performance of anionic dyes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.2 no.1
• /
• pp.55-59
• /
• 1973

This experiment was carried out to improve on the simple and conventional processing method by studying the characteristics of poultry meat. For the experiment, 20 hens culled and 20 broilers were slaughtered and divided into the following five groups; whole carcass, skinned carcass, debonned carcass, thigh muscle and breast muscle. Each group was ground by the super grinding machine. The results tobtained are summarized as follows; (1) The percentage of the ready-to-cook of cull hens and broilers was $64.32{\pm}2.11,\;67.96{\pm}1.16$, and of the water uptake, $105.43{\pm}1.9,\;104.13{\pm}0.2$, respectively. (2) In the chemical composition, broiler meat showed high moisture content and a little low fat content, as compared with cull hen meat. By groups, whole carcass ground meat contained lower maisture content, and higher fat and ash content than thigh muscle and breast muscle. (3) Thigh muscle and breast muscle group was higher than the other and whole carcass group was lower for the relative WHC and water retention.(4) The higher temperature the higher cooking loss percentage in all groups, and whole carcass group was the highest cooking loss percentage among the all groups.(5) The significant difference was little observed for the relative WHC, water retention and cooking loss percentage by groups between cull hen and Broiler.

• Korean Journal of Ecology and Environment
• /
• v.54 no.4
• /
• pp.315-326
• /
• 2021

The clear-water phase (CWP) is a notable limnological phenomenon in freshwater systems caused by predatory interactions between large filter-feeding zooplankton and phytoplankton. However, the mechanisms and factors that influence the extent of CWP, particularly in complex water systems with both fluvial and lacustrine characteristics, remain poorly understood. The present study evaluated CWP occurrence patterns at different sites in a large reservoir located in a temperate monsoon region (Lake Paldang, Korea); the relationships among factors associated with CWP occurrence, such as transparency, zooplankton diversity, and chlorophyll a concentration were investigated. Transparency exhibited significant correlations with precipitation and retention time, as well as the relative abundance of zooplankton (p<0.01), suggesting that a change in the retention time due to precipitation can alter CWP. Data collected before and after CWP occurrence were analyzed using paired t-test to determine variations in CWP occurrence based on the water system characteristics. The results demonstrated that various factors were associated with CWP occurrence in the fluvial-type and lacustrine-type sites. The correlation between zooplankton biomass and transparency was stronger in the lacustrine-type sites than in the fluvial-type sites. The lacustrine-type sites, where cladoceran emergence is common and is associated with long retention times, favored CWP occurrence. The results suggest that lacustrine-type sites, which are conducive to zooplankton development and have relatively long retention times, enhance CWP occurrence. Furthermore, CWP occurrence was notable in spring, and the present study revealed that site-specific CWP could occur throughout the year, regardless of the season.

• Horticultural Science & Technology
• /
• v.18 no.6
• /
• pp.839-844
• /
• 2000

In developing of soil wetting agents using the mixture of polyoxyethylene octylphenyl ether [$C_8H_{17}O$ $(C_2H_4O)_{10}H$, POE] and polyoxyethylene+polypropyleneoxide tridecylether (1:1, w/w, CM-1), the effect of base carriers such as zeolite and vermiculite on changes of concentration of POE and on initial wetting of peat-vermiculite media were determined. The concentration of POE in the treatment of zeolite was higher than that of vermiculite. The treatments of POE+CM-1 with zeolite or vermiculite as carrier were effective in initial water retention of root media having about 510 mL of water per pot, where those of AquaGro and control had 490 mL and 400 mL of water per pot, respectively. In the evaporative water loss, the treatment of zeolite and AquaGro were faster than those of control and vermiculite. The treatment of AquaGro had faster water movement in root media than those of POE+CM-1 regardless of carriers and same trends were observed in the volume of water infiltrating into root media. Also, increasing the amount of POE+CM-1 resulted in increased water retention capacity, evaporative water loss, water movement in root media and amount of water infiltrating into root media.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.1-10
• /
• 2008

Synthetic mineral microparticles (SMM) is a patented system which has been developed to promote drainage of water and retention of fine particles during papermaking. It is shown in patents that the SMM system can have advantages in both of drainage and retention, compared with montmorillonite (bentonite), which is one of the most popular materials presently used in this kind of application. Turbidity and gravity drainage time were measured using a Britt-Jar test with representative SMM formulations, in order to confirm the efficacy of SMM covering a wide range of compositions and discover effects of some key variables that have the potential to lead to unexpected advantages in terms of the effectiveness of the microparticles, when used in combination with a cationic polyacrylamide treatment of papermaking furnish. An iron silicate showed highest retention performance, as well as suitably fast drainage time relative to other metal silicate and bentonite. Zinc silicate improved retention and drainage. SMM synthesized from aluminum sulfate ($Al_2(SO_4){_3}$) did not show a benefit in retention and drainage, relative to bentonite. SMM synthesized from aluminum chloride ($AlCl_3$) performed better in drainage and retention than bentonite when the Al/Si ratios were 0.76 and 1.00. It was found that when the Al/Si ratio and neutralization are considered, pH variation due to the change of Al/Si ratio can be a key factor to control the size of primary metal silicate particles and the degree of coagulation of the primary particles.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.191-195
• /
• 2006

Multivariate data analysis tools were used to improve the understanding of the wet end chemistry and white water system of the Papermill at NorskeCanada Crofton Division. Specifically, the analysis was aimed at identifying what variables were contributing to increased retention aid use and wet end instability. Several models were developed using data sets with up to 88 process variables and over 3000 observations. It was found that increased retention aid use was driven primarily by PCC and TMP usage as well as the addition of Alaskan White Spruce to the TMP furnish.

• Membrane and Water Treatment
• /
• v.1 no.4
• /
• pp.253-271
• /
• 2010

A theoretical study for the flux enhancement by pulsation of transmembrane pressure is presented for osmotic pressure controlled ultrafiltration under laminar flow regime. The transient velocity profile is solved analytically using Green's function method. Time dependent convective diffusive equation is solved to quantify the membrane surface concentration and the permeate flux, numerically. The effects of the amplitude and frequency of pulsation on flux, surface concentration and observed retention are studied.

• The Journal of Korean Medicine
• /
• v.28 no.3 s.71
• /
• pp.183-196
• /
• 2007

Objective : This study was conducted in order to find the effects of Gammaekdaejo-tang (Ganmaidazao-tang, GDT) by subjecting rats to immobilization stress, thereby inducing depression, anxiety and acquisition-retention defects. Method : Rats treated with normal saline, GDT 200mg/kg and GDT 400mg/kg were subjected to stress by immobilization. Afterwards, behavior changes were observed by elevated plus maze test, acquisition test and retention test in the Morris water maze. The results were obtained by immunohistochemically measuring stress hormone (corticosteroid) levels in the blood. Results and Conclusions : 1. The open arm test in the elevated plus maze showed that compared with the normal group, the time spent decreased in the control group and increased in the GDT 400mg/kg group. 2. The locomotor activity test in the elevated plus maze revealed that the control group showed significant activity decrease compared with the normal group but significant increase in the GDT 400mg/kg group. 3. The acquisition test in the Morris water maze showed that the acquisitive ability of the control group significantly deteriorated on the 3rd and 4th day compared with the normal group, but improved significantly in the GDT 200mg/kg and GDT 400mg/kg groups. 4. The retention test on the 7th day in the Morris water maze revealed that the retentive ability of the control group significantly deteriorated compared with the normal group, but the retentive ability of the GDT 400mg/kg group significantly improved. 5. The blood levels of corticosteroid in the control group increased significantly compared with the normal group but the levels of corticosterone in the blood of the GDT 400mg/kg group significantly decreased.