펄프종이기술 (Journal of Korea Technical Association of The Pulp and Paper Industry)

한국펄프종이공학회 (Korea Technical Association of the Pulp and Paper Industry)
권호 표지

Application of Synthetic Mineral Microparticles with Various Metal Species

  • Lee, Sa-Yong (Department of Wood and Paper Science, North Carolina State Univ.) ;
  • Hubbe, Martin A. (Department of Wood and Paper Science, North Carolina State Univ.)
  • 발행 : 2008.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Synthetic mineral microparticles (SMM) is a patented system which has been developed to promote drainage of water and retention of fine particles during papermaking. It is shown in patents that the SMM system can have advantages in both of drainage and retention, compared with montmorillonite (bentonite), which is one of the most popular materials presently used in this kind of application. Turbidity and gravity drainage time were measured using a Britt-Jar test with representative SMM formulations, in order to confirm the efficacy of SMM covering a wide range of compositions and discover effects of some key variables that have the potential to lead to unexpected advantages in terms of the effectiveness of the microparticles, when used in combination with a cationic polyacrylamide treatment of papermaking furnish. An iron silicate showed highest retention performance, as well as suitably fast drainage time relative to other metal silicate and bentonite. Zinc silicate improved retention and drainage. SMM synthesized from aluminum sulfate ($Al_2(SO_4){_3}$) did not show a benefit in retention and drainage, relative to bentonite. SMM synthesized from aluminum chloride ($AlCl_3$) performed better in drainage and retention than bentonite when the Al/Si ratios were 0.76 and 1.00. It was found that when the Al/Si ratio and neutralization are considered, pH variation due to the change of Al/Si ratio can be a key factor to control the size of primary metal silicate particles and the degree of coagulation of the primary particles.

키워드

참고문헌

  1. Drummond, D.K., Synthetic Mineral Microparticles for Retention Aid Systems, U.S. Pat. 6,184,258 B1 (2001)
  2. Drummond, D.K., Synthetic Mineral Microparticles, U.S. Pat. 5,989,714 (1999)
  3. Drummond, D.K., Synthetic Mineral Microparticels and Retention Aid and Water Treatment Systems and Methods Using Such Particles, U.S. Pat. 6,183,650 B1 (2001)
  4. Housecroft, C.E. and Sharpe, G., Inorganic Chemistry, Pearson Education Limited, Essex, England (2001)
  5. Moffett, R.H., On-site production of a silica-based microparticulate retention and drainage aid, TAPPI J. 77(12): 133-138 (1994)
  6. Hubbe, M.A., Reversibility of Polymer-Induced Fiber Flocculation by Shear. 1. Experimental Methods, Nordic Pulp Paper Res. J. 15(5): 545 (2000) https://doi.org/10.3183/NPPRJ-2000-15-05-p545-553
  7. Hubbe, M.A., Reversibility of Polymer-Induced Fiber Flocculation by Shear. 2. Multi-Component Chemical Treatments, Nordic Pulp Paper Res. J. 16(4): 226 (2001)
  8. Hubbe, M.A., Microparticle Programs for Drainage and Retention, in Micro and Nanoparticles in Papermaking, Ch. 1, Rodriguez (ed.), TAPPI Press (2005)
  9. Hubbe, M.A., Retention and Hydrodynamic Shear, Tappi J. 69(8): 116 (1986)
  10. Iler, R.K., The Chemistry of Silica -Solubility, Polymerization, Colloid and Surface Properties, and Biochemistry, J. Wiley & Sons, New York (1979)
  11. Bottero, J.Y., Porier, J.E. and Fiessinger, F., Study of Partially Neutralized Aqueous Aluminum Chloride Solutions: Identification of Aluminum Species and Relation between the Composition of the Solutions and Their Efficiency as a Coagulant, Progress in Water Technology, 1(1): 601 (1980)
  12. Bottero, J.Y. and Fiessinger, F., AluminumChemistry in Aqueous Solution, Nordic Pulp and Paper Res. J., 4(2): 81 (1989) https://doi.org/10.3183/NPPRJ-1989-04-02-p081-089
  13. Bottero, J. Y., Tchoubar, D., Cases, J. M., Fiessinger F., Investigation of the Hydrolysis of Aqueous- Solutions of Aluminum-Chloride. 2. Nature and Structure by Small-Angle X-Ray-Scattering, Journal of Physical Chemistry 86 (18): 3667 (1982) https://doi.org/10.1021/j100215a034
  14. Bottero, J. Y., Cases, J. M., Fiessinger, F., Poirier, J. E., Studies of Hydrolyzed Aluminum-Chloride Solutions. 1. Nature of Aluminum Species and Composition of Aqueous-Solutions, Journal of Physical Chemistry 84 (22): 2933 (1980) https://doi.org/10.1021/j100459a021
  15. Iler, R.K., The Effect of Surface Aluminosilicate Ions on the Properties of Colloidal Silica, Journal of Colloid and Interface Science 55(1): 25-34 (1976) https://doi.org/10.1016/0021-9797(76)90005-9