• 청정기술
• /
• 제4권2호
• /
• pp.11-22
• /
• 1998

광증감제로서 과황산 이온, 황산 이온, 질산 이온, 아질산 이온 및 염소 이온을 이용한 반응조건하에서 수용액중 벤젠의 광증감 산화반응을 조사하였다. 과황산 이온이 가장 효과적인 광증감제로 나타난 반면, 황산 이온 및 아질산이온은 벤젠의 광증감 산화반응에 증감역할을 수행하지 못하였다. 아질산 이온은 다른 이온과 공존할 때 생성된 ${\cdot}OH$라디칼을 소멸시켜 벤젠의 광증감 산화반응을 저해하는 것으로 나타났다.

• 한국자기학회지
• /
• 제10권1호
• /
• pp.7-10
• /
• 2000

Co계 비정질합금을 400~46$0^{\circ}C$에서 열처리 한 후 냉각조건에 따른 자기특성의 변화를 조사하였다 42$0^{\circ}C$에서 30분 열처리 한 뒤 큐리점까지 노냉 후 수냉 시킨 경우 초투자율이 수냉 또는 노냉 했을 때보다 60-100% 정도 증가했다. 냉각속도에 따른 자기적 특성 변화를 내부음력 및 이온쌍의 규칙도(ordering) 관점에서 고찰하였다

• Nuclear Engineering and Technology
• /
• 제30권3호
• /
• pp.181-193
• /
• 1998

The COBRA-TF liquid droplet entrainment models have been assessed and improved through various experiments. The COBRA-TF code uses the Wurtz entrainment model in the film mist flow regime and the mechanistic model based on the critical Weber number and critical vapor velocity in the hot wall flow regimes, respectively. The Wurtz model has been replaced with the modified Sugawara model. The assessment against the experiments by Hewitt, Keeys, Yanai, and Whalley showed the modified Sugawara model better predicts the steam-water as well as the air-water experiments for the film mist flow regime. For hot wall flow regime, the COBRA-TF entrainment model was modified using two methods, one with an increased critical Weber number and the other with the Yonomoto's critical vapor velocity model. The modified models were assessed using the FLECHT-SEASET bottom reflood tests. The results showed that the Yonomoto model best predicts the quenching time, whereas the local maximum rod temperature was not affected much.

• 한국해양공학회지
• /
• 제1권2호
• /
• pp.67-73
• /
• 1987

The feasibility for a practical use of underwater wet arc welding process is experimentally investigated by using low hydrogen and high oxide type electrodes and TMCP steel plates. Main results are summarized as follows: 1)The absorption speed of the coated low hydrogen and high titanium oxide type eletrodes becomes constant after about 30 minutes in water, and more steeping time in water does not influnce welding arc behavior. 2) By bead appearance and X-ray inspection, the high titanium oxide type electrode is better than the low hydrogen type in underwater arc welding process. 3) The mechanical properties of underwater wet arc welds depend upon welding conditions more than those of in-air welds, and the optimum welding condition can be obtained. 4) Because of quenching effect by rapid cooling rate in underwater wet welding, the maximum hardness of HAZ is increased relatively higher in underwater wet welding, process.

• 한국압력기기공학회 논문집
• /
• 제17권2호
• /
• pp.90-100
• /
• 2021

Molten corium-concrete interaction (MCCI) is one of the most important phenomena that can lead to the potential hazard of late containment failure due to basemat penetration during a severe accident. In this study, MCCI analytical models of the CORQUENCH code were prepared through verification calculations of several experiments, which had been performed using concrete types similar to those of the calandria vault floor in CANDU-6 plants. The behaviors of thermal-hydraulic variables related to MCCI phenomena were analyzed under the conditions of dry floor and water flooding during the severe accident stemming from a hypothetic station blackout. Uncertainty analyses on the ablation depth were also carried out. It was estimated that the concrete ablation was not interrupted due to the continuous MCCI process under the dry condition but was terminated within 24 hours under the water flooding condition. It was confirmed that the water flooding as a mitigating action was effective to achieve the quenching and thermal stabilization of the melt discharged from the calandria vessel, showing that the present models are capable of reasonably simulating MCCI phenomena in CANDU-6 plants. This study is expected to provide the technical bases to the accident management strategy during the late-phase severe accidents.

• 한국환경과학회지
• /
• 제8권2호
• /
• pp.255-261
• /
• 1999

To investigate the effects of strong acidic electrolytic water on the chloroplast, barley leaves were treated with strong acidic electrolytic water(pH 2.5). And to investigate the effects of weak acidic electrolytic water on the chloroplast development, etiolated barley leaves were treated with weak acidic electrolytic water(pH 6.5) during greening period. Chl contents, Fo, Fv, and Chl fluorescence quenching coefficient in barley leaves were measured during and after treatment of acidic electrolytic water. The following results were obtained. Chl a, b, and carotenoid were decreased with treatment of strong acidic electrolytic water. Chl contents were significantly decreased than that of the control after 5 min. These results provide evidence that the strong acidic electrolytic water dissimilate the Chl and so that the value of Fo was slightly increased. The strong acidic electrolytic water damaged PS II because Fo was increased and Fv, Fm, and Fv/Fm ratio were decreased. qP, qNP and qE were decreased. On the other hand qI was increased than that of the control. But Chl content and Chl fluorescence patterns were a little changed as the pH increase over 4.0 Chl a, b, and carotenoid were increased with treatment of weak acidic electrolytic water during greening period. Chl contents were significantly increased than that of control after 12 hours greening. These results provide evidence that the weak acidic electrolytic water accelerated the chlorophyll synthesis. And the weak acidic electrolytic water accelerated PS II development because Fv, Fm, qP and Fv/Fm ratio were increased than that of the control.

• 한국식품저장유통학회지
• /
• 제23권3호
• /
• pp.387-392
• /
• 2016

이 연구의 목적은 이종산업인 섬유산업에서 사용되고 있는 천연염색의 원료인 천연염료의 항산화 활성을 확인하는 것으로 이를 위해 총 페놀 함량 분석, DPPH 라디칼소거능, ABTS 라디칼 소거능 및 단일항산소 억제 효과를 분석하였다. 7종의 천연염료 열수추출물에서 DPPH 라디칼 소거 활성을 나타내는 $IC_{50}$ 값은 0.012~0.239 mg/mL를 나타내어 일부 색소 추출물의 DPPH 소거 활성이 우수하다는 것을 알 수 있었다. 특히 폴리페놀함량이 높은 자단향과 아선약 추출물의 $IC_{50}$ 값이 각각 $12.4{\mu}g/mL$, $24.2{\mu}g/mL$로 높은 DPPH 라디칼 소거 활성을 확인하였다. 단일항산소 억제 효과 역시 아선약, 자단향 추출물에서 각각 0.19, 0.21 mg/mL을 나타내어 높은 소거 활성을 띄는 것으로 강한 빛에 의해 야기되는 단일항산소(singlet oxygen)를 억제할 수 있는 것을 알 수 있었다. 총 페놀 함량도 열수추출물에서 높은 수준을 나타내었다. 반면, 플로라워터의 항산화 활성은 열수추출물 대비 미비한 효과를 보였으나 한련초의 경우 열수추출물 보다 우수한 결과를 나타내었다. 플로라워터의 경우 액상시료를 첨가하여 수행되는 실험 방법에 의해 정량적 수치를 명확히 나타내기 어렵기 때문에 연구 방법적 측면에서 개선이 필요할 것으로 판단된다. 결론적으로 일부 천연색소 추출물은 생물체의 산화적 스트레스로부터 야기되는 활성산소를 억제하는 중요한 역할을 하며, 보다 심도 깊은 연구를 진행한다면 새로운 생물 소재로 활용성이 높을 것으로 사료된다.

• Transactions on Electrical and Electronic Materials
• /
• 제9권4호
• /
• pp.143-146
• /
• 2008

In this study the thermal impact characteristics by forest fire are extensively investigated using temperature controlled ovens. The test conditions for thermal impact damage are simulated according to the characteristics of natural forest fire. The test pieces are suspension porcelain insulators made by KRI in 2005 for transmission lines. In the thermal impact cycle tests with $300\;^{\circ}C$ thermal impact gradient (-70 to $230\;^{\circ}C$), cycling in 10 minute periods, no critical failures occurred in the test samples even with long cycle times. But in tests with thermal impact gradient from room temperature to $200-600\;^{\circ}C$, cycling in 10 to 30 minute periods, there were critical failures of the porcelain insulators according to the thermal impact gradient and quenching method. In the case of thermal impact by forest fire, it was found of that duration time is more important than the cycling time, and the initiation temperature of porcelain insulator failures is about $300\;^{\circ}C$, in the case of water quenching, many cracks and fracture of the porcelain occurred. It was found that the thermal impact failure is closely related to the displacement in the cement by thermal stress as confirmed by simulation. It was estimated that the initiation displacement by the thermal impact of $300\;^{\circ}C$ is about 0.1 %. Above 1% displacement, it is expected that the most porcelain insulators would fail.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.335-335
• /
• 2008

눈에 안정한(1.53um) 인산염 레이저 유리를 제조하기 위한 기본 조성 (mole%)은 $55P_2O_5\cdot24BaO\cdot10K_2O\cdot4Al_2O_3\cdot6Yb_2O_3$로 하고, 활성 이온은 $Er^{+3}$로, sensitizer로는 $Cr^{+3}(Yb^{+3})$을 사용하였다. 혼합된 원료 조성은 대기와 원료로부터 혼입되는 OH group을 제거하기 위하여 open 시스템에서 가스 버블을 공급하였으며, 용융물에 공급된 시간 변화에 따라 분광학적 특성 변화를 조사하였다. OH oscillations linear 에 의해 quenching된 $Er^{+3}$ 형광방출 확률은 $3500cm^{-1}$ 에서 OH stretching vibration band의 흡수계수에 의존하고 있으며, 이때 $Er^{+3}$의 농도는 $1.6\times10^{19}$에서 $21.2\times10^{19}$ ion/$cm^2$ 범위에서 존재하였다.

• 한국재료학회지
• /
• 제8권11호
• /
• pp.1031-1037
• /
• 1998

Zircaloy-4와 Zr-2.5Nb 합금의 부식에 미치는 냉각속도와 소둔온도의영향을 조사하기 위해서 여러 가지 방법으로 열처리된 시편에 대해서 autoclave 부식시험을 실시하였다. 냉각속도의 영향을 조사하기 위해서 시편을 $1050^{\circ}C$에서 30분 가열 후 염빙수냉, 수냉, 유냉, 공냉, 노냉의 방법에 의해 열처리하였으며, 소둔온도의 영향을 조사하기 위해서 $\alpha$온도, $\alpha$+$\beta$온도, $\beta$온도구역에서 열처리하였다. $500^{\circ}C$부식시험 결과, Zircaloy-4합금에서는 nodule형 부식이 발생되는 반면에 Zr-2.5Nb 합금에서는 nodule형 부식이 발생되지 않았다. Zirfcaloy-4 합금에서는 nodule형 부식이 발생되는 반면에 Zr-2.5Nb 합금에서는 nodule형 부식이 발생되지 않았다. Zircaloy-4합금은 냉각속도가 빠를수록 내식성이 증가하는 반면에 Zr-2.5Nb합금은 냉각속도가 빠를수록 내식성이 감소하는 경향을 보였다. 또한 소둔온도가 증가할수록 Zr-2.5Nb 합금의 내식성은 감소하는 결과를 보였다. Zircaloy-4의 내식성은 Fe, Cr 원소의 기지내 분포와 석출물의 분포에 의해 지배를 받으며 Zr-2.5Nb 합금의 내식성은 기지조직내의 Nb 농도와 $\beta_{-Nb}$상에 의해 지배를 받는 것으로 사료된다.