Improvement of Liquid Droplet Entrainment Model in the COBRA-TF Code

  • Published : 1998.06.01

Abstract

The COBRA-TF liquid droplet entrainment models have been assessed and improved through various experiments. The COBRA-TF code uses the Wurtz entrainment model in the film mist flow regime and the mechanistic model based on the critical Weber number and critical vapor velocity in the hot wall flow regimes, respectively. The Wurtz model has been replaced with the modified Sugawara model. The assessment against the experiments by Hewitt, Keeys, Yanai, and Whalley showed the modified Sugawara model better predicts the steam-water as well as the air-water experiments for the film mist flow regime. For hot wall flow regime, the COBRA-TF entrainment model was modified using two methods, one with an increased critical Weber number and the other with the Yonomoto's critical vapor velocity model. The modified models were assessed using the FLECHT-SEASET bottom reflood tests. The results showed that the Yonomoto model best predicts the quenching time, whereas the local maximum rod temperature was not affected much.

Keywords

References

  1. NUREG/CR-3064 v.1;5 COBRA/TRAC- A Thermal-Hydraulics Code for Transient Analysis of Nuclear Reactor Vessels and Primary Coolant Systems M. J. Thurgood;J. M. Kelly;T. E. Guidotti;R. J. Kohrt;K. R. Crowell
  2. JAERI-M 93-133 Improvement of COBRA-TF code models for liquid entrainments in film-mist flow A. Ezzidi;T. Okubo;Y. Murao
  3. AIChE Journal v.21 no.2 Inception Criteria for Droplet Entrainment in Two-Phase Concurrent Film Flow M. Ishii;M. A. Grolmes
  4. RISO Report No. 372 An Experimental and Theoretical Investigation of Annular Steam-Water Flow in Tubes and Annuli at 30 to 90 bar J. Wurtz
  5. One-Dimensional Two-Phase Flow G. B. Wallis
  6. J. of AIChE v.22 The Interfacial Drag and the Height of the Wall Layer in Annular Flows W. H. Henstock;T. J. Hanratty
  7. KAERI/AR-450/96 A State-of-the-art Report on Modeling of Liquid Entrainment Phenomena in Two-Phase Flow J. J. Jeong;K. S. Ha;W. P. Chang
  8. Nuclear Engineering and Design v.154 A Simple Model for Vertical Annular and Horizontal Stratified Two-phase flows with liquid entrainment and Phase Transitons: One-dimensional Steady State Conditions V. Stevanovic;M. Studovic
  9. Nuclear Engineering and Design v.122 Droplet deposition and entrainment modeling based on the three-fluid model S. Sugawara
  10. AIChE. Journal v.1 no.3 Fundamentals of the Hydrodynamic Mechanism of Splitting in Dispersion Processes J. O. Hinze
  11. J. of Fluids Engineering v.105 Generation and Size Distribution of Droplet in Annular Two-Phase Flow I. Kataoka;M. Ishii;K. Mishima
  12. J. of Heat Transfer v.105 A Solution for Dispersed Flow Heat Transfer Using Equlibrium Fluid Conditions G. L. Yoder;W. M. Rohsenow
  13. JAERI-R 96-024 A Study of Entrainment at a break and in the core during SBLOCA in PWR T. Yonomoto
  14. AERE-R 5374 Liquid Entrainment in Adiabatic Steam-Water Flow G. F. Hewitt(et al.)
  15. AERE-R 6293 Liquid Entrainment in Adiabatic Steam-Water Flow at 500 and 1000 psia R. K. F. Keeys(et al.)
  16. Nuclear Engineering and Design v.50 Multi-fluid modeling of annular two-phase flow T. Saito(et al.)
  17. NUREG/IA-0127, GRS-101, MPR-1346 Reactor Safety Issues Resolved by the 2D/3D program P. S. Damerell(et al.)(edited)
  18. EPRI NP-1459 PWR FLECHT-SEASET Unblocked Bundle, Forced and Gravity Reflood Task Volume 1 M. J. Loftus(et al.)
  19. EPRI NP-4111 Analysis of FLECHT-SEASET 163-Rod Blocked Bundle Data Using COBRA-TF C. Y. Paik(et al.)