• Resources Recycling
• /
• v.17 no.2
• /
• pp.16-29
• /
• 2008

According to the statistical data of the Ministry of Environment, 47million tons of construction waste were generated, and 96.7% of them was recycled in 2005. However, the recycled products seem to be remained under low quality. Because mixed demolition and construction waste, so called DC Waste, including concrete, brick, plaster, lumber, plastics building materials, paper and some dirt and stone, is very variable and difficult to estimate its exact composition, it is regarded as having little or no value to the construction industry. 'The Research group on recycling of construction waste' was started by the Housing & Urban Research Institute(KNHC), which is sponsored as a large scale national project by the Ministry of Construction and Transportation. This research group intends to establish recycling system through planing, processing, developing practical technology, and eventually contribute to save natural resource and to vitalize the industry. In this paper an overview of DC waste management and recycling technology is given in some detail. Particularly, "recycling law of construction waste" and recent research trends on recycling of construction waste are discussed.

• Proceedings of the Korea Contents Association Conference
• /
• 2012.05a
• /
• pp.113-114
• /
• 2012

본 연구는 건설폐기물로 분류되는 석분 슬러지를 성토재로 활용가능성을 분석하기 위한 목적으로 수행하였으며, 강도증진의 방안으로 쏘일 시멘트 효과를 이용하여 양생기간에 따른 일축압축강도를 분석한 결과 성토재로서의 이용가능성을 모색할 수 있는 것으로 판단된다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.61-62
• /
• 2012

This study is for analyzing possibility of utilizing as cement from waste concrete. The scrapped fine powder which contains a large amount of hydrate of cement can supercede lime stone, and greenhouse gas reductions are expected. However, Fine Aggregate powder efficient separation technology development is essential for that limestone substitution effect and reduce greenhouse gas emissions in order to facilitate through the recycling of the scrapped fine powders.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.70-75
• /
• 1999

The purpose of this study is to recycle the waste concrete which is generated in large quantities as crushed stone in construction works. This study deals with the comparative analysis on the construction works and engineering properties of recycled aggregate concrete through physical experiment. The experimental variables are the kinds of aggregates, some different aggregate composition, and W/C ratio(0.40, 0.45, 0.50). It is able to find from the experimental results that the recycled aggregate concrete is good as general concrete on the construction works and engineering propperties. In addition to, the reliable regression analysis equations between compressive strength and various experimental data for recycled aggregate concrete are presented.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.15 no.3
• /
• pp.1-6
• /
• 2019

The basalt fiber, which is found to be non-toxic and harmless to the human body, is expected to become a trend for industrial fibers as they have better properties of non-combustion, heat-resistant, soundproof, absorbent, moistureproof, wear-resistant, corrosion resistant, lightweight, and high strength properties. Thus, in this study, we analyzed the chemical compositions of basalt produced at seven sites on Jeju Island for making a high value inorganic insulation material. The results showed that the MgO content of basalt collected from the eastern part of Jeju Island was higher than 7.5 percent, while that of the western region was less than 6 percent.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.299-306
• /
• 2023

Environmental pollution problems are occurring due to the negative treatment of basalt waste in Jeju Island. This study identifies the characteristics of permeable block with basalt with physical and chemical adsorption mechanisms and examines their applicability and functionality as building materials. This experiment is basic data for evaluating the functionality of the permeable block by analyzing flexural strength, compressive strength, permeability coefficient, carbon dioxide, and fine dust adsorption rate by producing a permeable block using a basalt waste rock. As the basalt waste stone replacement rate increased, the flexural strength and compressive strength tended to decrease, and as the replacement rate increased, the water permeability coefficient, absorption rate, carbon dioxide, and fine dust adsorption rate tended to increase. Therefore, it is judged that the permeable block using the basalt waste rock is superior to the existing permeable block.

• International Journal of Highway Engineering
• /
• v.17 no.1
• /
• pp.25-33
• /
• 2015

PURPOSES : This paper, presents the results of a laboratory study aimed to verify the suitability of a particular type of Electric Arc Furnace (EAF) steel slag to be recycled in the lithic skeleton of both dense graded and porous asphalt mixtures for flexible pavements. METHODS : Cyclic creep and stiffness modulus tests were performed to evaluate the mechanical performance of three different asphalt mixtures (dense graded, porous asphalt, and stone mastic) prepared with two types of EAF steel slag. For comparison purposes, the same three mixtures were also designed with conventional aggregates (basalt and limestone). RESULTS : All the asphalt mixtures prepared with EAF steel slag satisfied the current requirements of the European standards, which support EAF steel slag as a suitable material for flexible pavement construction. CONCLUSIONS : Based on the experimental work, the use of waste material obtained from steel production (e.g. EAF steel slag) as an alternative in the lithic skeleton of asphalt mixtures can be a satisfactory and reasonable choice that fulfills the "Zero Waste" objective that many iron and steel industries have pursued in the past decades.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.3
• /
• pp.35-40
• /
• 2013

The present study was conducted to investigate the adsorption potential of red mud for fluoride removal. Different operation parameters such as the effect of contact time, initial concentration, pH, competing anions, seawater, adsorbent dose amount, and adsorbent mixture were studied. Nearly 3 hr was required to reach sorption equilibrium. Equilibrium sorption data were described well by Langmuir model and the maximum adsorption capacity of red mud was 5.28 mg/g. The fluoride adsorption at pH 3 was higher than in the pH range 5-9. The presence of anions such as sulfate, nitrate, phosphate, and bicarbonate had no significant effect on fluoride adsorption onto red mud. The fluoride removal by red mud was greater in seawater than deionized water, resulting from the presence of calcium and magnesium ion in seawater. The use of red mud alone was more effective for the removal of fluoride than mixing red mud with other industrial waste such as oyster shells, lime stone, and steel slag. This study showed that red mud has a potential application in the remediation of fluoride contaminated soil and groundwater.

• Conservation and Restoration of Cultural Heritage
• /
• v.1 no.1
• /
• pp.39-48
• /
• 2012

The first twenty-five years of scientific study within Korea on Korean traditional ceramics has been characterized as a bridging effort to understand the rich field of artistic ceramic masterpieces on one hand with analytic results gained from mounds of broken shards and kiln wastes on the other. First shard pieces were collected directly from the waste mounds, but most of the analyzed shards were provided by art historians and museum staffs directly involved in systematic excavations. The scientific study is viewed as one of many complimentary ways in learning about the multi-faceted ceramics culture, ultimately connecting human spirits and endeavors from the past to the present to the future. About 1350 pieces of analyzed shards have been so far collected and organized according to the production location and time period. From the experimental results of the analysis, the compositional and microstructural characteristics of bodies and glazes have been deduced for many kiln sites of Goryeo and Joseon dynasties. Except for a few local kilns, porcelain stone was used as body material in both dynasties. The principle of mixing a clay component with a flux material was used in Korean glazes as was in China. The clay component different from body clay was often used early on. In Gangjin a porcelain material appropriate for whiteware body was mixed for celadon glaze, and in Joseon Gwangju kilns glaze stone was chief clay material. The use of wood ash persisted in Korea even in making buncheong glazes, but in Joseon whitewares burnt lime and eventually crushed lime were used as flux material.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.1
• /
• pp.1-12
• /
• 2022

Stone has been used for various purposes, such as for building stones, megaliths, ornamental stones, hunting and grinding throughout history. The global stone production amounted to around 153 million tons in 2018 excluding quarry waste, up 0.8% on year. Of them, stone residues accounted for 71%. The worldwide stone trading decreased 1.5 million tons to 56.5 million tons in 2018. The average price of stone was 34.1 USD per square meter, down 2.5% from the previous year. It's down 7% when only considering trading between the world's top twelve exporters. But in the three leading countries, Italy, Greece and Brazil, the price saw a sharp increase. In 2018, stone imports and exports totaled 815 million square meters, raising over 20 billion USD of revenue. Imports were largely led by six countries: China, Italy, Turkey, India, Brazil, Spain and Portugal, from largest to smallest.) In terms of stone use per 1,000 population, it was 117 square meters in 2001, and it increased to 264 square meters in 2017 and 266 square meters in 2018. The volume more than doubled during the period, but it has been declining slightly in recent years. China, India, Saudi Arabia and Belgium were the only countries that the stone use per 1,000 population exceeded 1,000 square meters. The increase rate was steepest in China, India and the United States, from largest to smallest. The global stone production is likely to grow to 69.85 million tons by 2025, despite the global economic downturn.