• 한국포장학회지
• /
• 제23권1호
• /
• pp.17-26
• /
• 2017

유럽의 포장 폐기물 통계를 다양한 관점에서 확인하기 위해서 Eurostat의 데이터베이스 중심으로 유럽의 포장 폐기물 발생 및 처리의 연도별 변화, 유럽 국가들의 재생률과 재활용률 목표 그리고 유럽 국가별 재활용률로 정리하여 분석하였다. 2005년부터 2013년까지 기간 동안의 모든 포장 폐기물 발생량에서 포장 재료 중 종이 및 판지가 가장 많이 생산되었음을 확인하였으며, 주요 포장 재료의 점유율 성장 추이에서는 대체적으로 포장 재료 간 일정한 추세를 확인하였다. 또한 유럽 연합 회원국들은 포장 폐기물 재생률과 재활용률 목표 지침을 제정하고 있는데, 2008년 이 지침이 제정된 후로 대부분의 EU 국가들이 잘 지키고 있었다. 마지막으로 Eurostat에서는 포장 폐기물의 양과 재활용된 양을 유리, 종이 및 판지, 금속, 플라스틱, 목재 등의 포장 재료별로 폐기물의 재활용 비율을 산출하고 있는데, 유럽의 전체 포장 폐기물의 재활용 비율의 경우 계속해서 증가하는 추세를 확인하였다. 이를 통해 EU 국가별로 포장 재료별 폐기물의 양과 재활용된 양을 비교 분석하고 이러한 추세 변화에 따른 GDP 감소와 경제적 슬럼프와 같은 포장 폐기물과 재활용에 따른 간접적인 영향력도 확인할 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제4권1호
• /
• pp.89-95
• /
• 2009

현행 "건설폐기물의 재활용 촉진에 관한 법률" 시행령 별표1에서는 다양한 성상으로 배출되는 건설폐기물의 종류를 17가지로 구분하고 이중 제17호의 혼합폐기물은 건설폐토석을 제외한 나머지 15가지 성상의 건설폐기물중 둘 이상의 건설폐기물이 혼합된 것으로 정의하고 있다. 이중 폐콘크리트, 폐아스콘과 같은 건설폐재류는 대부분이 순환골재와 같이 재활용되고 있으며 폐금속과 같은 유가성 자재류는 대부분 분리 판매되어 2차 제품 제조등에 활용되고 있다. 그러나 폐목재, 폐합성수지, 폐섬유 등과 같은 가연성 폐기물의 경우 발열량이 높고 인체에 해로운 중금속 함유량이 적어 RDF나 RPF와 같은 에너지 연료로 활용이 가능하지만 상당량이 혼합폐기물 형태로 배출되어 단순 소각 및 매립되고 있는 실정이다. 그러므로 본 연구에서는 단순하게 외관상의 분류만을 고려하여 설정한 현행 "건폐법"과는 달리 최초 발생단계에서부터 최종처리까지 건설폐기물의 흐름을 보다 효율적으로 제어할 수 있도록 건설폐기물의 분류를 크게 가연성, 불연성, 가연성 불연성 혼합, 기타 등으로 분류하였다. 가연성 폐기물의 경우 기존의 소각 폐기물을 중심으로 폐목재, 폐섬유 등 기존의 소각 폐기물을 중심으로 분류를 하고 불연성은 재활용이 원활한 건설폐재류와 기타로 구분, 혼합건설폐기물은 발생 자체부터 서로 다른 물질이 결합되어 있어 분리 자체가 어려운 폐기물을 대상으로 하였다. 또한 이상에서 폐기물은 지정폐기물을 제외하고 모든 기타 폐기물로 분류하도록 하였으며 기본적으로 건설현장에서 발생하는 폐기물은 1차적으로 가연성, 불연성, 혼합폐기물로 분류하여 배출하는 시스템이 되도록 폐기물의 분류를 실시하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.380-383
• /
• 2004

The coarse and fine aggregates that make up the majority of concrete are resources. But, the raw naturals that make up concrete are our earth's resources and there is not a replenishable stock. Also industrial waste and life waste leaped into a pollution source. Therefore, as construction continue, quarries are exhausted and new sources must be discovered. The purpose of this paper is to investigate an application of recycled coal ash plastics in the construction field. The study examined the physical and mechanical properties of recycled coal ash plastics aggregate. In the results, although the absorption and specific gravity of SLAs increases slightly as the fly ash content increases, the compressive strength and modulus of elastic of concrete made with SLAs remains relatively constant when mortar type and volume fraction are also held constant. These values are always lower than natural-weight aggregate concretes.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 Proceeding of CIN-KIN Joint Symposium 2000 on M.E.T. Under STCW 78/95 and SINO-KOREA MARITIME CONTACT IN MID-CENTURIES
• /
• pp.83-91
• /
• 2000

This paper illustrates a new idea methods and results of WPD oil applied to marine diesel engines. in recent years, we must make an effort to develop an advanced technique for recycling of waste plastics in order to utilize scrapped plastics as fuel source for diesel engine. It is very important and necessary for us to cope with the increasing calorific value and the growing need of environment protection. The experiment fuel oil was obtained by mixing of diesel oil, WPD and water.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.592-596
• /
• 2001

A TACUB jig was applied to separate waste plastics [polystyrene (PS), acrylonitrile butadiene styrene (ABS), and polyethylene terephthalate (PET)] used in copy machine. The effect of water pulsation including amplitude and frequency on the separation performance was investigated for the feeds containing two or three plastics. Good results are obtained under suitable conditions. Grades of 99.8% PS,99.3% ABS, and 98.6% PET are recovered as the products in the upper, middle and bottom layers respectively. Based on these results, a processing plant fer recycling of plastics from scrapped copy machines is now under construction.

• Journal of the Korean Wood Science and Technology
• /
• 제42권5호
• /
• pp.597-604
• /
• 2014

Laboratory-scale landfills (simulated landfills) were designed to determine the formaldehyde released into air and leachate from medium density fiberboard (MDF). Simulated landfills were constructed using cylindrical plastic containers containing alternating layers of soil and MDF for a total of five layers. The highest concentration of formaldehyde was found in the air and leachate from the MDF only treatment compared to treatments containing MDF and soil. At the end of the study (28 days), formaldehyde concentrations in air and leachate from treatments containing MDF and soil decreased by 70 percent and 99 percent, respectively, while the treatment containing MDF only still released formaldehyde into the air and leachate. Therefore, waste MDF after storing 4 weeks in water may be recycled as compost or mulch based on formaldehyde leaching. Also, these data indicate soil restricts formaldehyde release into air and leachate and provides new information about the fate of wood-based composite waste containing UF resin disposed in landfills.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.840-845
• /
• 2003

Polymer concrete (PC) using unsaturated polyester resins based on recycled polyethylene terephthalate (PET) plastic waste were used in our study for grasping its mechanical properties such as compressive strength, tensile strength and flexural strength, etc. by changing its quantity of resin, filler and dilution(SM) respectively. As a result of it, compressive, tensile and flexural strength of PC indicated 752kgf/$cm^2$, 80kgf/$cm^2$, and 243kgf/$cm^2$, kind of satisfaction successively. Judging from the above results, polymer concrete (PC) using unsaturated polyester resins as a coupling are suitable for construction material both in the aspect of ECO-building materials and in the aspect of superior strength of PC so that it is good possibility of success as a product.

• 환경위생공학
• /
• 제10권2호
• /
• pp.13-22
• /
• 1995

Most of small- scale livestock facility have difficulties to treat organic wastewater by activated sludge process as distinguished feces and urine. The organic wastewater discharged have characteristics of slurry, high concentration of BOD, 55 etc. This study was performed to estimate suitable condition for the application of packing materials, air flow, pollutant load and so on as important parameter to treat organic wastewater by thermopile oxlc process. As a result obtained at this experiments the most suitable condition for BOD load, air flow indicate 3.0kg · m$^{-3}$ day$^{-1}$,50 ∼ 100L· min$^{-1}$ m$^{-3}$, respectively, and we knew that it was necessary to add waste contained high calories to degrade about 80% of pollutant among waste- water. It showed that plastic material can be used as packing media because it can be provided as inhabitation for microorganism owing to intensity of material and characteristic of keeping moisture.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.245-252
• /
• 2005

An underground research facility (KURF) is under construction at KAERI for the in situ studies related to the validation of a HLW disposal system. For the safe construction and long-term researches at KURF, mechanical stability of the facility should be evaluated. In this study, 3D mechanical stability analysis using the rock mass properties determined from various in situ as well as laboratory tests was carried out. From the analysis, it was possible to predict the rock deformation, stress concentration, and plastic zone developed before and after the excavation. A test blasting was performed to characterize the site dependent dynamic response, which can be used for the prediction of the blasting impact on the facilities in KAERI.

• 자원리싸이클링
• /
• 제6권2호
• /
• pp.12-21
• /
• 1997

Plastics waste constitutes approximately 23% by volume of the municipal solid waste(MSW) generated in the U.S. each year, and have slow rate of degradation in the environment. Therefore, there is a great deal of public pressure to recycle plastics, and more than 100 million people participate in the curbside recycling programs. Despite the high level of public interest, only 3.5% of the plastic are recycled, which is substantially lower than the recycle rates of other materials such as paper fibers, glass, and iron. Although a large part of the reason is due to the low price of virgin polymers, which in turn is due to the low price of oil, it is possible to make the plastics recycling as a profitable business by developing advanced technologies. In this communication, various methods of separating pplastics from metals and from each other are discussed.