• Journal of the Mineralogical Society of Korea
• /
• v.27 no.4
• /
• pp.311-320
• /
• 2014

A magnetic separation study was conducted for a soil sampled from a landfill site where steel slag had been dumped for a long time. Heavy metal concentrating effect was evaluated by analyzing heavy metal content of magnetically separated soil and passed through soil. The effect was compared between soil after soil-washing process and original landfill soil and the effect was also tested between wet condition-magnetic separation and dry condition-magnetic separation. Separated ratio was relatively higher in non-soil washed sample. The water content has no significant effect on the separation rate. The concentrating effect of Fe, Pb, Cu, and Cd were 3.2, 2.1, 12.1, 2.5, 1.5 and 17.4, 7.0, 15.7, 9.6, 7.0 respectively for non-soil washed sample and soil washed sample. We can expect a bigger volume reduction effect from soil-washed samples. The volume reduction effect was obtained from the separation in dry condition. However, when the separation ratio is too high the volume reduction effect decreases. The magnetic separation leads to a volume reduction and concentration of heavy metals into a portion of soil in case of paramagnetic particles contained soil.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.10
• /
• pp.1454-1459
• /
• 2012

An improved detection of radiation-induced paramagnetic faults was developed to identify the irradiation status of basil and clove. The effectiveness of different sample pretreatments, including freeze-drying (FD), oven-drying (OD), alcoholic-extraction (AE), and water-washing and alcoholic-extraction (WAE), were examined. All non-irradiated samples showed a single central signal ($g_0$=2.006), whereas radicals representing two additional side peaks ($g_1$=2.023 and $g_2$=1.986) with a mutual distance of 6 mT were detected in the irradiated samples. AE and WAE produced the best results for irradiated clove in terms of intensities of radiation-specific ESR signals and their ratios to the central signal. However, FD provided the highest intensities of radiation-specific ESR signals for basil, whereas their ratios to the major signal were better in the cases of AE and WAE. Signal noise, particularly due to $Mn^{2+}$ signals, was observed, whereas it decreased in AE and WAE pretreatments. Based on our results, AE and WAE can improve the detection conditions for radiation-specific ESR signals in irradiated samples.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.3
• /
• pp.341-349
• /
• 2017

Blood decontamination is an important factor in success of the orthodontic bracket. The purpose of this study is to evaluate the shear bond strength affected by blood decontamination. The shear bond strength was measured on blood decontamination before and after primer photopolymerization. And the adhesive remnants type and surface patterns was evaluated under scanning electron microscopy. A total of 50 human premolars were prepared. Group I was attached using conventional resin-acid etching method as control group. Group II and III were blood contaminated before curing primer and groups IV and V were blood contaminated after curing primer. Group II and IV were treated only with cotton pellet and Groups III and V were treated with cotton pellet after water washing. The mean shear bond strengths were in the order of groups I, V, III, II, and IV. In scanning electron micrographs group III and V showed more uniform surface than group II and IV. The ARI was significantly different between the control group and the experimental groups (p <0.05).

• Korean journal of applied entomology
• /
• v.17 no.3 s.36
• /
• pp.155-160
• /
• 1978

This experiment was carried out to develope a technique for labelling pine gall midge with ·radioactive phosphorus and calcium. This technique evolved would help to obtain basic information on the appropriate concentration of $^{32}P\; and\; ^{45}Ca$ in tagging and determination of adult flight ranges which considered as one of the factors in dissemination. 1. Labelling at the larval stage of pine gall midge by injection of $^{45}Ca$ into pine tree trunk appeared not to be effective for tagging the adults because radioactivity was gradually decreased to background by emergence. 2. The radioactivities of larvae in the galls gradually increased in September but from October 1 the activity was gradually decreased for 10 days then equilibrium was maintained thereafter. The results seem to indicate that larval diet termination occured early October. 3. A maximum level of radiation was detected at 3 weeks after $^{32}P$ injection and thereafter it was gradually reduced. This result implies that $^{32}P$ is not appropriate radioisotope in labelling pine gall midge through trunk injection method. 4. After washing in running water for 10 minutes, the optimum$^{32}P$ concentration for treated overwintered larvae and pupae was found to be 0.5 micro curie per ml. for 30 minutes dipping.

• Journal of Technologic Dentistry
• /
• v.33 no.4
• /
• pp.369-378
• /
• 2011

Purpose: This study was carried out for the purpose of obtaining basic data necessary for developing the future oral health promotion program of the elderly by surveying the actual condition of managing dental prosthesis in the elderly. Methods: It collected materials targeting 346 elderly brackets in over 65 years old who dwell in Seoul and Gyeonggi-do Province for about 10 months from September 2010 to June 2011, analyzed 312 copies except 34 copies, which are inappropriate for data processing due to being insufficient in response among these things, and obtained the following results. Results: In the actual condition of missing tooth, a case of missing tooth was indicated to be 78.8%. In case of missing tooth, the number of missing teeth was indicated to be 75.6% for under 5 pieces and 19.1% for over 21 pieces. In the actual condition of managing prosthesis, a case with dental prosthesis treatment was indicated to be 77.6%. A kind of prosthesis was indicated to be the highest in fixed partial dentures with 36.5%. In a method of rinsing dentures, 47.7% of the elderly responded as saying of washing it out with water. The appearance of removing dentures at night was indicated to be the highest in doing so with 63.1%. Satisfaction with prosthesis of being mounted now was indicated to be moderate with 50.4%. As for the appearance of having experience of education on how to manage prosthesis, it was indicated to be high with 50.4% in having none. In a kind of prosthesis depending on averagely monthly income, the ratio of total dentures was high when averagely monthly income is low. On the other hand, a case with high income was indicated to have high ratio in implants. The satisfaction with prosthesis was low when averagely monthly income is low. Also, in the experience of education on how to manage prosthesis, the ratio of responses as saying of having no experience of education on how to manage prosthesis was indicated to be high when averagely monthly income is low. Conclusion: Examining the above results, a developmental plan is considered to be necessary such as developing continuous and systematic oral health promotion program for managing elderly people's managing dental prothesis.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.4
• /
• pp.268-274
• /
• 2012

To perform quick measurements of black carbon (BC) particles deposited on foliar surfaces of forest tree species, we investigated an optical method for measuring the amount of BC extracted from foliar surfaces and collected on quartz fiber filters. The seedlings of Fagus crenata, Castanopsis sieboldii, Larix kaempferi and Cryptomeria japonica were exposed to submicron BC particles for one growing season (1 June to 7 December 2009). At the end of the growing season, the leaves or needles of the seedlings were harvested and washed with deionized water followed by washing with chloroform to extract the BC particles deposited on the foliar surfaces. The extracted BC particles were collected on a quartz fiber filter. The absorption spectrum of the filters was measured by spectrophotometer with an integrating sphere. To obtain the relationship between the absorbance of the filter and the amount of BC particles on the filter, the amount of BC particles on the filter was determined as that of elemental carbon (EC) measured by a thermal optical method. At wavelengths below 450 nm, the absorption spectrum of the filter showed absorption by biological substances, such as epicuticular wax, resulting in the low coefficient of determination ($R^2$) in the relationship between the amount of EC on the filter ($M_{EC}$, ${\mu}g\;C\;cm^{-2}$ filter area) and the absorbance of the filter. The intercept of the regression line between $M_{EC}$ and the absorbance of the filter at 580 nm ($A_{580}$) was closest to 0. There was a significant linear relationship between the $A_{580}$ and $M_{EC}$ ($R^2$=0.917, p<0.001), suggesting that the amount of BC particles collected on the filter can be predicted from the absorbance. This optical method might serve as a simple, fast and cost-effective technique for measuring the amount of BC on foliar surfaces.

• Journal of Korean Medical classics
• /
• v.22 no.3
• /
• pp.79-95
• /
• 2009

Background : Eye diseases refer to a wide range of disconveniences from conjunctivitis, pterygium, glaucoma to even blindness. Acupuncture has been widely used in Korea throughout the history and provides an efficient method in the treatment of them. Objectives : Establish a distinctive and efficient acupuncture method for the treatment of eye diseases based in literature research. Method : We reviewed four Korean medical literature, "Guide to Swollen Sore Treatment[治腫指南]", "Treasured Mirror of Eastern Medicine[東醫寶鑑]", "Experiential Prescriptions of Acupuncture and Moxibustion[鍼灸經驗方]", and "Essential Rhymes on Acupuncture and Moxibustion by Master Saam[舍岩鍼法]", and analyzed the therapeutic characteristics in the treatment of eye diseases. Result : 1. According to "Guide to Swollen Sore Treatment[治腫指南]", various methods were applied in the treatment of eye diseases. We can cite salt water washing method after needling, pricking bloodletting method using three-edged needle, surgery method using bent needle and lance needle, or sore treatment using sliced bean-curd and ground Aristolochiae Fructus among others. Acupuncture points like GV20[百會], BL1[睛明], EX-HN5[太陽], GB20[風池], GV24[神庭], GB1[瞳子髎], and GB15[臨泣] were mostly needled. 2. In "Treasured Mirror of Eastern Medicine[東醫寶鑑]", pricking bloodletting method were most frequently used in comparison to single acupuncture or moxibustion methods. Applied points were GV20[百會], BL1[睛明], LI4[合谷], EX-HN5[太陽], GB37[光明], BL18[肝兪], GB20[風池], BL2[攢竹], GB1[瞳子髎], and ST36[三里]. Also selections of adjacent points were considered important. 3. In respect to treatment methods "Experiential Prescriptions of Acupuncture and Moxibustion [鍼灸經驗方]" has some similarity to "Treasured Mirror of Eastern Medicine[東醫寶鑑]" as pricking bloodletting method were mostly used. Also focused on normal Qi flow through meridian. Points like BL18[肝兪], BL1[睛明], LU5[尺澤], EX-HN5[太陽], LI4[合谷] were used. 4. "Essential Rhymes on Acupuncture and Moxibustion by Master Saam[校勘舍岩道人鍼法]" considered visceral pattern identification method fundamental in the diagnosis and treatment of eye diseases. Specifically, Liver, Heart, Stomach, Lung, Kidney identification methods are presented. Combined both corresponding and connecting meridians supplementation and draining methods according to mother-child relation. Also Saam master's own experiential prescriptions are noted. Conclusions : After previous study on stroke, we could also find various efficient methods according to eye diseases, through literature research of korean medical classics. This study will concurrently result in establishing distinctive therapeutic method characteristic of Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.128-133
• /
• 2020

This study was conducted to demonstrate the manufacturing process for producing high-quality solar salt. The design criteria of the manufacturing process, which was studied in a previous study, was applied to an actual manufacturing system to evaluate its performance. The design factors applied were the drying air temperature and the temperature of the washing water. They were 100℃ or less and 10℃ or less, respectively. Two standards were applied to the process performance evaluation. Standard (I) was the international food standard for solar salt, and standard (II) was the quality standard for high-quality solar salt production. The main quality evaluation items were the moisture content and salinity, and the color characteristics were also measured (p<0.05). The manufacturing process of solar salt consisted of five steps, and the quality change was measured for each step. The measured quality was appropriate to the standard (I) from the third-step process. In addition, the quality of the high-quality solar salt was suitable for the standard (II) from the fourth-step process. Therefore, the performance of the proposed solar salt production process met international standards. The improvements in the production of high-quality solar salt will improve international competitiveness in the future.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.730-738
• /
• 1992

Filtration characteristics according to membrane materials were studied In the ultrafiltration of anaerobic digestion broth as a post treatment method. A series of resistances for different membranes were quantitatively assessed on the basis of the resistance-in-series model. Flux behavior observed with the digestion broth was irrelevant to initial water permeabilities of each membrane. The fluoro polymer membrane showed the most significant improvement of flux with increase of cross-flow velocity, which suggests that the cake layer formed on this membrane is more weakly attached to the membrane surface than those on the other membranes. Flux reduction during longtime running was attrib-used to the polarization layer resistance ($R_p$) as well as the fouling layer resistance($R_f$). Continuous increase of $R_p$ may reflect the variation in the characteristics of cake layers, which could result from size, shape, and structure changes due to lysis and growth of biomass. Hydrophilic cellulosic membrane had a much lower fouling tendency than hydrophobic polysulfone membrane. The depressurization method induced a small increase in flux of $5-10L/m^2/h$. During washing and cleaning, filtrability of each membrane was rapidly recovered within 15 minutes until a stationary value was reached.

• Korean Journal of Microbiology
• /
• v.37 no.1
• /
• pp.61-65
• /
• 2001

Epifluorescence microscopy was used to observe epiphytic bacteria directly on plant leaf surfaces as well as indirectly in the leaf liberating solution by staining with fluorochromes of 4',6-diamidino-2-phenylindole (DAPI) and acridine orange(AO). Epiphytic bacteria could not be well observed on the leaf surface by staining with AO due to an intrusive orange or red background fluorescence. However, DAPI gave us clear epifluorescent images of the bacteria on the leaf. On the contrary, epiphytic bacteria in the liberating leaf solution were well observed on filters stained by both types of fluorochrome, although DAPI showed better fluorescent images than AO and not necessarily required a washing step of the filters stained. The optimum conditions of the DAPI stains were 5 $\mu$g/ml for 5 min both for leaves and for filters of the liberating solution. It was confirmed that a critical step in the epifluorescence microscopy of leaf surfaces was to minimize release of water from the leaf. For this, the stained leaf samples were put on a filter paper, kept in a dry oven at $70^{\circ}C$ for 2 min instead of air-drying, and then immediately observed by epifluorescence microscopy. The established technique was applied to enumerate epiphytic bacteria on oak tree leaf surfaces.