• 문화기술의 융합
• /
• 제8권3호
• /
• pp.507-514
• /
• 2022

본 연구에서는 출산 경험이 있는 여성을 대상으로 젖병 세척기 사용 시 손목 회전 동작에서 나타나는 근활성도 및 세척 방법에 따른 세척 청결도, 사용성 평가를 비교 분석하고자 한다. 이를 위하여 자동 젖병 세척기와 수동 젖병 세척기 사용 시 전완근의 근활성도, 세척 청결도는 장비를 활용하여 정량 평가하였으며, 변인들의 효과 분석을 실시하여 다음과 같은 결론을 얻었다. 첫째, 근활성도는 자동 젖병 세척기가 수동 젖병 세척기를 사용할 때 보다 낮은 것으로 나타났다. 둘째, 청결도는 자동세척(정방향+역방향)시 세척력이 제일 우수한 것으로 판단되며, 그 다음으로 자동세척(정방향), 수동세척 순으로 나타났다. 셋째, 젖병 세척기 사용에 대한 사용성 평가는 자동 젖병 세척기가 수동 젖병 세척기에 비하여 높은 만족도를 보였다. 이러한 결론을 통해 자동 젖병세척기 사용에 대한 효과성을 입증함으로서 본 연구는 향후 제품 고도화의 기초자료로 활용할 수 있을 것으로 판단된다.

• 한국기계가공학회지
• /
• 제9권2호
• /
• pp.60-65
• /
• 2010

Injection molding process is one of the popular manufacturing methods to produce plastic parts with high efficiency and low cost. The tub-drum for drum type washer is made by an insert injection molding process with aluminum alloy insert of windmill type and has a big and complex structure consisted of many ribs to sustain the strength. In this paper, the volumetric shrinkages of rib part and bottom part surrounded by a windmill type insert are analyzed according to the vertical and circumferential direction of tub-drum. Volumetric shrinkage and its difference according to the height or radius of tub drum inform the designer to reduce the warpage of tub drum, and the optimal design of tub drum can be done from the those results. The change of volumetric shrinkage according to packing pressure is also analyzed. It is very important to analyze the volumetric shrinkage of tub drum because it generates the wearing phenomena at the rotating part connected to an aluminum alloy insert due to the warpage of tub drum.

• 한국토양환경학회지
• /
• 제3권3호
• /
• pp.109-116
• /
• 1998

본 연구에서는 유류 오염토양 복원을 위한 효율적인 세척 공정과 장비를 구성하여 현장 적용 가능성을 검토하였다 토양세척 장비는 co-current식 전세척장치와 counter-current식 세척조로 구성된다. 토양 이송 및 부분 세척이 이루어지는 전세척장치를 통과한 토양과 물은 세척용액이 첨가되는 세척조로 유입되며, 적정 운전 조건하에서 내벽에 부착된 나선형 웨어에 의해 일정 입경을 기준으로 토양이 분리되며, 동시에 각 웨어 사이에 부착된 임펠러의 교반력에 의해 토양내 오염물질이 탈착된다. 실험 결과, 전세척장치는 토양주입량 1 kg/min, 진탕비 1, 회전속도 50 rpm에서 최대 세척효율 83.6%(#4-)을 보였으며 세척조에서는 토양.물 주입위치 15 cm, 회전속도 5 rpm, 경사각 $6^{\circ}$, 세척용액 주입유량 0.8 L/min일 때 최대 세척효율인 97.9% (#4-)를 나타내었다.

• 한국강구조학회 논문집
• /
• 제12권2호통권45호
• /
• pp.143-150
• /
• 2000

마찰접합용 고장력 볼트 셋트의 관련 규격에서 허용하는 치수공차 범위 내에서 너트 구멍의 편심과 와셔 구멍 지름의 공차는 체결 시 편심에 의한 접촉면적의 결손을 초래하고 체결력의 산포를 유발하는 요인이 된다. 편평한 너트 자리면과 와셔의 접촉시 분포되는 압력의 비선형성을 고려하여 편평한 자리면 형상을 원호곡면으로 바꾸면 초기 선 접촉은 체결이 진행됨에 따라 면 접촉으로 발전한다. 원호 접촉면은 편심에 의한 접촉면적의 결손을 감소시켜 접촉상태가 양호해지므로 자리면 마찰토크(체결력) 안정화에 기여하게 된다. 유한요소법으로 너트와 와셔 접촉면의 압력을 구하고 나사면과 자리면의 마찰계수는 토크계수 A, B급이 포함되도록 조합하고 최대편심 시 토크계수를 계산하였다. 토크계수의 분포로부터 원호자리면의 적정 곡률반지름이 결정된다.

• 설비공학논문집
• /
• 제22권10호
• /
• pp.697-703
• /
• 2010

In recent semiconductor manufacturing clean rooms, air washers are used to remove airborne gaseous contaminants from the outdoor air introduced into a clean room. Meanwhile, there is a large amount of exhaust air from a clean room. From an energy conservation point of view, heat recovery is useful for reducing the outdoor air conditioning load required to maintain a clean room. Therefore it is desirable to recover heat from the exhaust air and use it to cool or heat the outdoor air. In the present study, numerical analysis was conducted to evaluate the recovered heat of an exhaust air heat recovery type air washer system, which is the key part of an energy saving outdoor air conditioning system for semiconductor clean rooms. The present numerical results showed relatively good agreement with the available experimental data.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.844-849
• /
• 2008

In recent semiconductor manufacturing clean rooms, in order to improve clean room air quality, air washers are used to remove airborne gaseous contaminants such as $NH_3$, SOx and organic gases from outdoor air introduced into clean room. Meanwhile, there is a large quantity of exhaust air from clean room. From the energy saving point of view, heat recovery is useful for the reduction of air conditioning energy consumption for clean room. Therefore it is desirable to recover heat from the exhaust air and use it to reheat the outdoor air. However, so far there have not been sufficient studies of analyzing the comparison of the amounts of energy consumption and saving. In the present study, an experiment was conducted to investigate the energy consumption and heat recovery of a fin-coil type air washer system for semiconductor manufacturing clean rooms.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권4호
• /
• pp.585-595
• /
• 2008

Process design of multi-stage forging for a bolt with nonaxisymmetric washer cam has been studied by using finite element method. For shape complexity of the bolt, it is impossible to manufacture in a single stage forging. To design multi-stage forging for the bolt the forging load and fiber flow of each step have been analyzed by using commercial finite element code DEFORM-3D. Simulated results have been compared with experimental ones. Multi-stage forging process has been designed with four stages. The workpiece should be eccentric shape until third forging stage. And then bolt head and washer of eccentrical shape is created in last stage. As a results, It was predicted that shape of product would be good and effective strain would be uniformly distributed in the product. Also, it was predicted whether defects would exist or not by reviewing the fiber flow.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.488-492
• /
• 2007

In this study, experiment was done to verify the relationship between sprayed water's pH and gas removal efficiency of the Air Washer system. The experiment was done with sprayed water's pH in between pH 4.7 to 7.7, and Ion Chromatography analysis was used to identify the system's gas removal efficiency. As a result, $NH_3$ is removal efficiency decreased under 50% above pH 7, and $SO_X$ and $NO_X$ removal efficiency decreased under pH 6. Through this research, the optimum pH operating condition of the Air Washer System was conformed to be in range between pH6 to pH6.5.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.12-17
• /
• 2004

By using an experimental approach recently developed to determine the torque-tension relationship for bearing frictional characteristics of several typical bolted joints were studied. The experimental approach allows the direct determination of the bearing friction between the nut and its bearing surface. Detailed friction studies were made on the influences of the size and shape of the hole, the use of a slot in a bolted joint, contact area and position, and other factors such as turning speed, coating, and the use of wax on the bearing surface. The contact area and position of the washer have a marginal effect on the bearing friction. The organic coating on the nuts reduces the bearing friction significantly. Nuts with organic coating over a washer with zinc finish provide the smallest and the most consistent bearing friction. The results from the experimental investigation will be helpful for the better design of bolted joints bearing friction. The results from the experimental investigation Will be helpful for the better design of bolted joints.

• 한국표면공학회지
• /
• 제51권5호
• /
• pp.309-315
• /
• 2018

The purpose of this study is to assess the mechanical properties of the ceramic abutment with washer. In this study, ceramic abutment were used, tested with $30^{\circ}$ compression load, shear fatigue, adaptation accuracy test(rotation angle, contact interval), removal torque force test, torsional breaking force test. The $30^{\circ}$ compression load was 729 N, the shear fatigue load was 275 N, adaptation accuracy test of rotation angle was within $3^{\circ}$, contact interval within $10{\mu}m$, and removal torque force test value is $18.88N{\cdot}cm$, torsional breaking force test value is $35.52N{\cdot}cm$. Ceramic abutment with a washer fitted have sufficient mechanical strength and may be substituted for titanium abutment.