• Membrane and Water Treatment
• /
• 제15권1호
• /
• pp.31-39
• /
• 2024

The flow in a nanopore of filtration membrane is often multiscale and consists of both the adsorbed layer flow and the intermediate continuum fluid flow. There is a controversy on which interface the slippage should occur in the nanopore filtration: On the adsorbed layer-pore wall interface or on the adsorbed layer-continuum fluid interface? What is the difference between these two slippage effects? We address these subjects in the present study by using the multiscale flow equations incorporating the slippage on different interfaces. Based on the limiting shear strength model for the slippage, it was found from the calculation results that for the hydrophobic pore wall the slippage surely occurs on the adsorbed layer-pore wall interface, however for the hydrophilic pore wall, the slippage can occur on either of the two interfaces, dependent on the competition between the interfacial shear strength on the adsorbed layer-pore wall interface and that on the adsorbed layer-continuum fluid interface. Since the slippage on the adsorbed layer-pore wall interface can be designed while that on the adsorbed layer-continuum fluid interface can not, the former slippage can result in the flux through the nanopore much higher than the latter slippage by designing a highly hydrophobic pore wall surface. The obtained results are of significant interest to the design and application of the interfacial slippage in nanoporous filtration membranes for both improving the flux and conserving the energy cost.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.176-179
• /
• 2008

In a numerical simulation of open channel turbulent flows, the determination of wall roughness height for wall function was studied. The roughness constant, based on the law-of-the -wall for flow on rough walls, obtained by experimental works for pipe flows is employed in general wall functions. However, this constant of wall function is the function of Froude number in open channel flows. Thus, the wall roughness should be determined by taking into account the effect of Froude number. In addition, the wall roughness should be corresponding to Manning's roughness coefficient widely used for open channels. In this study, the relation between wall roughness height as an input condition and Manning's roughness coefficient was investigated, and an equation for effective wall roughness height considering the characteristics of numerical models was proposed as a function of Manning's roughness coefficient.

• 한국가시화정보학회지
• /
• 제20권3호
• /
• pp.27-35
• /
• 2022

A problem on the sloshing flow of highly-viscous fluid in a rectangular box was revisited by both of theoretical approach and experimental visualization method. Based on the theoretical prediction that a linear shape of free surface is prevailing in bulk zone, it has been studied an analogy between a near wall coating flow in sloshing problem and dip coating flow in Landau-Levich problem. Phenomenological observation confirms that, in the case of highly-viscous fluid, I.e., R_e ≪ 1, viscous dominant near-wall flow in sloshing problem is identical to dip coating flow generated by drag-out of the plate being in both motion of vertical translation and horizontal rotation.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.42-42
• /
• 2003

• 한국수자원학회논문집
• /
• 제52권4호
• /
• pp.255-264
• /
• 2019

산지하천 만곡부의 홍수피해를 줄이고자 사다리꼴 단면의 돌출줄눈을 하천옹벽에 설치하였다. 본 연구에서는 사다리꼴 형상에 의한 흐름저항 효과를 파악하고자 개수로 측벽에 사다리꼴 돌출줄눈을 설치하여 수리실험을 수행하였다. 벽면조도가 k형에 해당하는 ${\lambda}_{nv}$가 6, 9, 12인 경우에 대해 유량에 따른 흐름특성을 파악하였다. 흐름저항은 돌줄줄눈의 설치간격이 멀어짐에 따라 전반적으로 증가하였다. 고유량 조건에서 최대마찰계수는 ${\lambda}_{nv}$가 9일 때 발생하였다. 사다리꼴 돌출줄눈은 정사각형 돌출줄눈과 비교해 흐름저항은 상대적으로 작았지만, 사다리꼴의 형상저항은 전체 흐름저항의 평균 62%를 차지했다. 벽면조도 증가에 따른 흐름저항 효과를 극대화하기 위한 사다리꼴 돌출줄눈의 최적 설치간격은 돌출줄눈 높이의 9~12배 범위임을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권1호
• /
• pp.25-33
• /
• 2005

When a circular tube with uniform heat generation within the wall was placed in a cross flow, heat flows by conduction in the circumferential direction due to the asymmetric nature of the fluid flow around the perimeter of the circular tube The circumferential heat flow affects the wall temperature distribution to such an extent that. in some cases, significantly different results may be obtained for geometrically similar surfaces. In the present investigation, the effect of circumferential wall heat conduction is investigated for forced convection around circular tube in cross flow of air and water Two-dimensional temperature distribution $T_w(r,{\theta})$ is calculated through the numerical analysis. The difference between one-dimensional and two-dimensional solutions is demonstrated on the graph of local heat transfer coefficients. It is observed that the effect of working fluid is very remarkable.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1903-1908
• /
• 2003

The motion of a small, heavy rigid particle in the shear flow on a stationary wall is investigated in the context of Stokes flow. The lift force proposed by Saffman(1965) and later modified by Mclaughlin(1991) and Mei(1992) is considered in the prediction of the particle motion far away from the wall. Later, the expression of the lift force is modified to take into account the effect of wall(Cherukat and Mclaughlin, 1994). In the analysis the gravity and buoyancy effect are also taken into account. An analytical and numerical results for the terminal velocities and trajectories of the particle after the enough lapse of time are presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.575-576
• /
• 2014

The Hull Mounted Sonar Dome housing the sonar sensor array is a ship's structure protruded from ship bottom, which is under turbulent flow. The flow of sonar surface is highly disturbed and turbulent. In this case the wall pressure fluctuations within the turbulent boundary layer are one of the most important flow induced self noise sources of the SONAR system. We investigate the characteristics of the wall pressure fluctuations of the hull mounted sonar dome through the model test in the cavitation tunnel. This paper contains the wall pressure fluctuation spectra at various free stream velocities.

• International Journal of Fluid Machinery and Systems
• /
• 제8권4호
• /
• pp.304-310
• /
• 2015

Numerical simulation was applied to investigate the Taylor vortex flow inside the concentric cylinders with a constant radial temperature gradient. The reliability of numerical simulation method was verified by the experimental results of PIV. The radial velocity and temperature distribution in plain and 12-slit model at different axial locations were compared, and the heat flux distributions along the inner cylinder wall at different work conditions were obtained. In the plain model, the average surface heat flux of inner cylinder increased with the inner cylinder rotation speed. In slit model, the slit wall significantly changed the distribution of flow field and temperature in the annulus gap, and the radial flow was strengthen obviously, which promoted the heat transfer process at the same working condition.

• 대한기계학회논문집B
• /
• 제35권7호
• /
• pp.717-722
• /
• 2011

본 연구의 목적은 국부감육이 일어나고 있는 위치들을 분석하고, 그와 관련된 난류매개변수를 밝혀내는데 있다. 축소 제작된 배관계 티부분에서의 실험과 수치해석이 이루어졌으며, 실제로 배관계 부품내에서의 유동특성을 유추하기 위하여 그 결과들이 비교 검토되었다. 국부감육율과 난류 매개변수간의 상관관계를 결정하기 위하여 급수가열기 주 배관에서의 티 부품에 대한 수치해석이 수행되었고, 실제적인 국부감육 발생 위치를 찾아내기 위해 알칼리 금속염을 사용하여 감육 유로가시화 실험을 수행하였으며, 이를 기초로 한 난류매개 변수와 국부감육의 두께가 비교 분석되었다. 이러한 결과 값 비교를 통하여 얻어낸 바로는 기하학적 형태에 기인하는 배관 벽면에서의 박리로 인한 반경 방향 유속 Vr이 국부 감육 현상과 가장 연관성이 높은 것으로 나타났다.