DOI QR코드

DOI QR Code

Numerical simulation of slit wall effect on the Taylor vortex flow with radial temperature gradient

  • Liu, Dong (School of Energy and Power Engineering Jiangsu University) ;
  • Chao, Chang-qing (School of Energy and Power Engineering Jiangsu University) ;
  • Zhu, Fang-neng (School of Energy and Power Engineering Jiangsu University) ;
  • Han, Xi-qiang (Beijing Shenwu Environment & Energy Technology Co., Ltd.) ;
  • Tang, Cheng (School of Energy and Power Engineering Jiangsu University)
  • Received : 2014.09.14
  • Accepted : 2015.08.20
  • Published : 2015.12.31

Abstract

Numerical simulation was applied to investigate the Taylor vortex flow inside the concentric cylinders with a constant radial temperature gradient. The reliability of numerical simulation method was verified by the experimental results of PIV. The radial velocity and temperature distribution in plain and 12-slit model at different axial locations were compared, and the heat flux distributions along the inner cylinder wall at different work conditions were obtained. In the plain model, the average surface heat flux of inner cylinder increased with the inner cylinder rotation speed. In slit model, the slit wall significantly changed the distribution of flow field and temperature in the annulus gap, and the radial flow was strengthen obviously, which promoted the heat transfer process at the same working condition.

Keywords

References

  1. Taylor, G. I., 1923, "Stability of a viscous liquid contained between two rotating cylinders," Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character, Vol. 223, pp. 289-343. https://doi.org/10.1098/rsta.1923.0008
  2. Yang, W. M. 2010, "Transformational phenomenon in the field of Taylor-Couette flow," Experimental Techniques, Vol. 34, No. 6, pp. 42-48. https://doi.org/10.1111/j.1747-1567.2009.00564.x
  3. Kedia, R., Hunt, M. L., and Colonius, T., 1998, "Numerical Simulations of Heat Transfer in Taylor-Couette Flow," Journal of heat transfer, Vol. 120, No. 1, pp. 65-71. https://doi.org/10.1115/1.2830066
  4. Lee, Y. N., and Minkowycz, W. J., 1989, "Heat transfer characteristics of the annulus of two-coaxial cylinders with one cylinder rotating," International journal of heat and mass transfer, Vol. 32, No.4, pp. 711-722. https://doi.org/10.1016/0017-9310(89)90218-4
  5. Liu, D., Yang, X. Y., and Ding, J., 2012, "Axial Wall Slits Effect on the Helical Flow in the Gap between two Concentric Cylinders," International Journal of Fluid Machinery and Systems, Vol.5, No.2, pp. 60-64. https://doi.org/10.5293/IJFMS.2012.5.2.060
  6. Hayase, T., Humphrey, J. A. C., and Greif R., 1992, "Numerical calculation of convective heat transfer between rotating coaxial cylinders with periodically embedded cavities," Journal of Heat Transfer, Vol.114, No.3. pp. 589-597. https://doi.org/10.1115/1.2911322
  7. Kang, C. W., Yang, K. S., and Mutabazi, I., 2009, "The effect of radial temperature gradient on the circular-Couette flow," Journal of computational fluids engineering, Vol.14, No.3, pp. 16-24.
  8. Poncet, S., Haddadi, S., and Viazzo, S. 2011, "Numerical modeling of fluid flow and heat transfer in a narrow Taylor-Couette-Poiseuille system," International Journal of Heat and Fluid Flow, Vol.32, No.1, pp. 128-144. https://doi.org/10.1016/j.ijheatfluidflow.2010.08.003
  9. Liu, D., Zhu J., and Wang, Y. Z. et al., 2014, "Numerical Simulation of the slit wall effect on flow stability in Taylor Vortex Flow Regime," Journal of Drainage and Irrigation Machinery Engineering, Vol.32, No.3, pp. 1-5.
  10. Liu,D., Lee,S. H., and Kim, H. B., 2010, "Effect of a constant radial temperature gradient on a Taylor-Couette with axial wall slits," Fluid Dynamics Research, Vol.42, No.6:065501. https://doi.org/10.1088/0169-5983/42/6/065501
  11. Kumar, M. A., and Prasad, B. V., 2012, "Computational investigations of impingement heat transfer on an effused concave surface," International Journal of Fluid Machinery and Systems, Vol.5, No.2. pp. 72-90. https://doi.org/10.5293/IJFMS.2012.5.2.072