• Journal of Information Processing Systems
• /
• v.17 no.6
• /
• pp.1157-1169
• /
• 2021

Modern graphics processor unit (GPU) architectures offer significant hardware resource enhancements for parallel computing. However, without software optimization, GPUs continuously exhibit hardware resource underutilization. In this paper, we indicate the need to alter different warp scheduler schemes during different kernel execution periods to improve resource utilization. Existing warp schedulers cannot be aware of the kernel progress to provide an effective scheduling policy. In addition, we identified the potential for improving resource utilization for multiple-warp-scheduler GPUs by sharing stalling warps with selected warp schedulers. To address the efficiency issue of the present GPU, we coordinated the kernel-aware warp scheduler and warp sharing mechanism (KAWS). The proposed warp scheduler acknowledges the execution progress of the running kernel to adapt to a more effective scheduling policy when the kernel progress attains a point of resource underutilization. Meanwhile, the warp-sharing mechanism distributes stalling warps to different warp schedulers wherein the execution pipeline unit is ready. Our design achieves performance that is on an average higher than that of the traditional warp scheduler by 7.97% and employs marginal additional hardware overhead.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.335-339
• /
• 2000

In the weaving process, tension control of the warp is important. The variation of the warp tension cause irregularities of the weft density and low quality of the woven fabrics. Due to the fact that the warp tension varies in depending on the difference between take-up velocity and let-off velocity, it is necessary to regulate the velocity of let-off in relation to that of take-up for keeping the warp tension. Futhermore, the diameter of warp beam changes in the weaving process. The changing diameter of warp beam cause changing inertia of warp beam and the velocity of the let-off. It makes the control of such a system more complex. In this paper, we propose a fuzzy controller for the warp tension control. From the computer simulation, it was observed that a developed fuzzy controller has a better performance than that of conventional PI controller.

• Textile Coloration and Finishing
• /
• v.11 no.6
• /
• pp.51-58
• /
• 1999

The dimensional properties on polyester warp knitted fabrics with various lengths of underlap were studied. The results indicated that loop density increased with decreasing loop length and loop density of satin warp knitted fabric are a little higher than that of reverse satin warp knitted fabrics at a constant loop length. As the distance of underlap becomes shorter, the weight per unit area and thickness increases, the bulkiness decreases and the shrinkage of knitted fabrics become larger toward wale in satin warp knitted fabric and toward the course in reverse satin warp knitted fabric.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.4
• /
• pp.1-9
• /
• 2019

LRR(Loose Round Robin) warp scheduling policy for GPU architecture results in high warp-level parallelism and balanced loads across multiple warps. However, traditional LRR policy makes multiple warps execute long latency operations at the same time. In cases that no more warps to be issued under long latency, the throughput of GPUs may be degraded significantly. In this paper, we propose a new warp scheduling policy which utilizes latency hiding, leading to more utilized memory resources in high performance GPUs. The proposed warp scheduler prioritizes memory instruction based on GTO(Greedy Then Oldest) policy in order to provide reduced memory stalls. When no warps can execute memory instruction any more, the warp scheduler selects a warp for computation instruction by round robin manner. Furthermore, our proposed technique achieves high performance by using additional information about recently committed warps. According to our experimental results, our proposed technique improves GPU performance by 12.7% and 5.6% over LRR and GTO on average, respectively.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.77-80
• /
• 2017

In this paper, we proposed a way to improve performance of GP-GPU by deletion of superscalar issue from its original form. At first, we simplified the structure of stream processor in order to eliminate superscalar issue. Under this condition, preservation of hardware size and increasing of thread number were followed by functional improvement of GP-GPU. As the number of thread was getting larger, we proposed the new model of warp scheduler which adjusts the group of thread. This superscalar issue-deleted warp scheduler transferred the instructions to warp which was activated by Round Robin Scheduling. Performance comparison was conducted by Gaussian filtering and the results indicated that our newly designed GP-GPU showing 7.89 times better in its performance than original one.

• Textile Coloration and Finishing
• /
• v.16 no.4
• /
• pp.26-35
• /
• 2004

This study surveys the tension differences between Korean domestic and foreign looms and analyses fabric mechanical properties due to warp and weft tension differences using KES-FB system. Paper is divided by two parts. In this 1st paper, fabric is designed as 5 harness satin weave using 75d/36f warp and 100d/192f weft polyester filaments, and is woven by $Omega^\circledR$ rapier loom by Textec Co.Ltd and Picanol$-GTX^\circledR$ rapier loom by Picanol Co.Ltd respectively. These grey fabrics are processed on the same dyeing and finishing processes. Weavability is also analysed by measuring warp tension variation according to the warp position, the relationship between shed amount and the warp tension on one fixed heald frame is surveyed, and the relationship between end breaks and warp and weft tensions is also discussed.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.101-105
• /
• 2005

This study surveys the warp and weft tension differences between projectile and air-jet looms and analyses the mechanical properties of worsted fabrics for garment with relation of these loom characteristics using KES-FB system. The paper is divided by two parts. In the 1st paper, the worsted fabric is woven as 5 harness satin weave using 1/40 Nm sirofil worsted warp yarn and 1/30 Nm worsted weft yarn by projectile(Sulzer) and air-jet looms(Picanol PAT and OMNI), respectively. The weavability is also analysed by measuring warp tension variation according to the warp position and weft tension of 3 kinds of looms. The relationship between shed amount and the warp tension is surveyed, and the relationship between end breaks and warp and weft tensions is also discussed.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.765-771
• /
• 2004

This study surveys the warp and weft tension differences among 3 types of rapier looms and analyses the mechanical properties of worsted fabrics for garment with relation of these looms characteristics using KES-FB system. Raper is divided by two parts. In the 1st paper, the worsted fabric is woven as 5 harness satin weave using 1/40 Nm sirofil worsted warp yam and 1/30 Nm worsted weft yam by rapier looms such as FAST-R, THEMA-11-E and PICANOL-GTX respectively. The weavability is also analysed by measuring warp tension variation according to the warp position and weft tension of 3 kinds of looms. The relationship between shed amount and the warp tension is surveyed, and the relationship between end breaks and warp and weft tensions is also discussed.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.2 s.130
• /
• pp.24-28
• /
• 2005

Monte Carlo simulation was performed on theoretical models of plywood warp for southern yellow pine plywood originating from the United States. The objective of the investigation was to determine which plywood layers was more warp sensitive to veneers that were manufactured to an undesired thickness. This study found that for a balanced panel (a panel of equal target thickness for each of five layers) manufactured veneers of undesired thickness would experience minimal warp. The veneers of undesired thickness placed in the center of the plywood panel also provided a minimum change of plywood warp properties. The panel warp was very sensitive to surface veneers constructed with undesired thickness. Conversely, this study confirms that monitoring of veneer thickness and proper allocations within the plywood lay-up were critical.

• Textile Coloration and Finishing
• /
• v.16 no.5
• /
• pp.48-53
• /
• 2004

This study surveys the tension differences between Textec and Vamatex looms and analyses fabric mechanical properties using KES-FB system according to warp and weft tension differences. Fabric is designed as 5 harness satin weave using 150d/48f warp and 200d/384f weft polyester filaments, and is woven by $Omega^{\circledR$-Panter rapier loom by Textec Co.Ltd and P1001es rapier loom by Vamatex Co.Ltd., respectively. These grey fabrics are processed on the same dyeing and finishing processes. Weavability is also analysed by measuring warp tension variation according to the warp position. The relationship between shed amount and the warp tension on one fixed heald frame is surveyed, and the relationship between end breaks and warp and weft tensions is also discussed.