• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.8-12
• /
• 1974

1. If one unity is given to the prongs whose ends touch each other for estimating the internal stresses occuring in it, the internal stresses which are developed in the open prongs can be evaluated by the ratio to the unity. In accordance with the above statement, an equation was derived as follows. For employing this equation, the prongs should be made as shown in Fig. I, and be measured A and B' as indicated in Fig. l. A more precise value will result as the angle (J becomes smaller. $CH=\frac{(A-B') (4W+A) (4W-A)}{2A[(2W+(A-B')][2W-(A-B')]}{\times}100%$ where A is thickness of the prong, B' is the distance between the two prongs shown in Fig. 1 and CH is the value of internal stress expressed by percentage. It precision is not required, the equation can be simplified as follows. $CH=\frac{A-B'}{A}{\times}200%$ 2. Under scheduled drying condition III the kiln, when the weight of a sample board is constant, the moisture content of the shell of a sample board in the case of a normal casehardening is lower than that of the equilibrium moisture content which is indicated by the Forest Products Laboratory, U. S. Department of Agriculture. This result is usually true, especially in a thin sample board. A thick unseasoned or reverse casehardened sample does not follow in the above statement. 3. The results in the comparison of drying rate with five different kinds of wood given in Table 1 show that the these drying rates, i.e., the quantity of water evaporated from the surface area of I centimeter square per hour, are graded by the order of their magnitude as follows. (1) Ginkgo biloba Linne (2) Diospyros Kaki Thumberg. (3) Pinus densiflora Sieb. et Zucc. (4) Larix kaempheri Sargent (5) Castanea crenata Sieb. et Zucc. It is shown, for example, that at the moisture content of 20 percent the highest value revealed by the Ginkgo biloba is in the order of 3.8 times as great as that for Castanea crenata Sieb. & Zucc. which has the lowest value. Especially below the moisture content of 26 percent, the drying rate, i.e., the function of moisture content in percentage, is represented by the linear equation. All of these linear equations are highly significant in testing the confficient of X i. e., moisture content in percentage. In the Table 2, the symbols are expressed as follows; Y is the quantity of water evaporated from the surface area of 1 centimeter square per hour, and X is the moisture content of the percentage. The drying rate is plotted against the moisture content of the percentage as in Fig. 2. 4. One hundred times the ratio(P%) of the number of samples occuring in the CH 4 class (from 76 to 100% of CH ratio) within the total number of saplmes tested to those of the total which underlie the given SR ratio is measured in Table 3. (The 9% indicated above is assumed as the danger probability in percentage). In summarizing above results, the conclusion is in Table 4. NOTE: In Table 4, the column numbers such as 1. 2 and 3 imply as follows, respectively. 1) The minimum SR ratio which does not reveal the CH 4, class is indicated as in the column 1. 2) The extent of SR ratio which is confined in the safety allowance of 30 percent is shown in the column 2. 3) The lowest limitation of SR ratio which gives the most danger probability of 100 percent is shown in column 3. In analyzing above results, it is clear that chestnut and larch easly form internal stress in comparison with persimmon and pine. However, in considering the fact that the revers, casehardening occured in fir and ginkgo, under the same drying condition with the others, it is deduced that fir and ginkgo form normal casehardening with difficulty in comparison with the other species tested. 5. All kinds of drying defects except casehardening are developed when the internal stresses are in excess of the ultimate strength of material in the case of long-lime loading. Under the drying condition at temperature of $170^{\circ}F$ and the lower humidity. the drying defects are not so severe. However, under the same conditions at $200^{\circ}F$, the lower humidity and not end coated, all sample boards develop severe drying defects. Especially the chestnut was very prone to form the drying defects such as casehardening and splitting.

• Economic and Environmental Geology
• /
• v.36 no.5
• /
• pp.321-328
• /
• 2003

The epithermal gold and base metal deposit of the Tanggeung district of West Java consists of four major veins(Celak, Cigodobras, Cilangkap and Pasirbedil) with NS to N10$^{\circ}$∼20$^{\circ}$E and N75$^{\circ}$W strikes. The veins occur within fractures cutting the crystal and lithic tuff of Jampang Formation(Oligo-Miocene) in and around the Mt. Subang of the western Java, Indonesia. The ore mineralization is characterized by the occurrence of pyrite, sphalerite, galena, chalcopyrite, and small amounts of bornite and Fe-oxides. Hydrothermal alteration, associated with the mineralization, was dominantly silicified and enveloped by the phyllitic(sericitic), argillic and propylitic alteration containing the disseminated pyrite. Gangue minerals consist of interstratified smectite-illite, chlorite, sericite, and minor kaolinite. The presence of vapor-rich fluid inclusions in quartz veins suggests that boiling occurred locally throughout ore deposition. Fluid inclusion studies suggest that the ore fluid evolved from initial high temperatures(〓34$0^{\circ}C$) to later lower temperatures(〓19$0^{\circ}C$). Salinities range from 0.0 to 8.3 wt percent NaCl equiv. The relatively high increase in salinity(up to 8.3 wt percent NaCl equiv) might be explained by a local boiling and by a participation of magmatic fluids, supported by the sulfur isotope results. Evidence of fluid boiling suggests that the pressure decreased from 200 bars to 120 bars. This corresponds to the depths of approximately 750 to 1,200 m in a hydrothermal system that changed from lithostatic to hydrostatic conditions. Using homogenization temperatures and paragenetic constraints, the calculated $\delta$$^{34}$ S values of $H_2S$ in ore fluid are -0.2 to 1.8 permil close to the 0 permil isotopic value of magmatic sulfur.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.58.1-58.1
• /
• 2010

In solar cell module manufacturing, single solar cells has to be joined electrically to strings. Copper stripes coated with tin-silver-copper alloy are joined on screen printed silver of solar cells which is called busbar. The bus bar collects the electrons generated in solar cell and it is connected to the next cell in the conventional module manufacturing by a metal stringer using conventional hot air or infrared lamp soldering systems. For thin solar cells, both soldering methods have disadvantages, which heats up the whole cell to high temperatures. Because of the different thermal expansion coefficient, mechanical stresses are induced in the solar cell. Recently, the trend of solar cell is toward thinner thickness below 180um and thus the risk of breakage of solar cells is increasing. This has led to the demand for new joining processes with high productivity and reduced error rates. In our project, we have developed a new method to solder solar cells with a laser heating source. The soldering process using diode laser with wavelength of 980nm was examined. The diode laser used has a maximum power of 60W and a scanner system is used to solder dimension of 6" solar cell and the beam travel speed is optimized. For clamping copper stripe to solar cell, zirconia(ZrO)coated iron pin-spring system is used to clamp both joining parts during a scanner system is traveled. The hot plate temperature that solar cell is positioned during lasersoldering process is optimized. Also, conventional solder joints after $180^{\circ}C$ peel tests are compared to the laser soldering methods. Microstructures in welded zone shows that the diffusion zone between solar cell and metal stripes is better formed than inIR soldering method. It is analyzed that the laser solder joints show no damages to the silicon wafer and no cracks beneath the contact. Peel strength between 4N and 5N are measured, with much shorter joining time than IR solder joints and it is shown that the use of laser soldering reduced the degree of bending of solar cell much less than IR soldering.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.4
• /
• pp.551-560
• /
• 2014

Twenty-four male 1-year old swamp buffaloes (Bubalus bubalis) were randomly allocated to 4 groups. One group grazed on guinea grass (GG) and another on guinea grass and the legume Stylosanthes guianensis (GL). The other two groups were kept in pens and fed freshly cut guinea grass and concentrate at an amount of 1.5% (GC1.5) and 2.0% (GC2.0) of body weight, respectively. The effect of the different feeding intensities on carcass characteristics and meat quality were assessed. The mean body weight at slaughter was 398 (${\pm}16$) kg. Average daily gain was higher in concentrate-supplemented groups (570 and 540 g/d in GC1.5 and GC2.0, respectively) when compared to GG (316 g/d) and GL (354 g/d) (p<0.01). Likewise, the warm carcass weight was higher in GC1.5 and GC2.0 compared to GG and GL. Dressing percentage was 48.1% and 49.5% in GC1.5 and GC2.0 in comparison to 42.9% and 44.8% observed in GG and GL, respectively. Meat of Longissimus throracis from GC1.5 and GC2.0 was redder in color (p<0.01), while water holding capacity (drip and thawing loss) was improved in pasture-fed groups (p<0.05). Protein and fat content of Longissimus thoracis was higher in animals supplemented with concentrate (p<0.01), as was cholesterol content (p<0.05), whereas PUFA:SFA ratio was higher and n-6/n-3 ratio lower (p<0.01) in pasture-fed buffaloes. Results of the present study showed that the supplementation of pasture with concentrate enhances the growth and carcass characteristics of swamp buffaloes expressed in superior dressing percentage, better muscling, and redder meat with a higher content of protein and fat, whereas animals grazing only on pasture had a more favorable fatty acid profile and water holding capacity. In conclusion, the supplementation of concentrate at a rate of about 1.5% of body weight is recommended to improve the performance and carcass quality of buffaloes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.6
• /
• pp.781-790
• /
• 2011

The effects of seedtime and maturity stage on nutritive value of five maize stover varieties, including conventional maize (Kexiangyu 11, CM), fodder maize (Huqing 1, FM), high oil maize (Gaoyou 115, HOM), sweet maize (Kexiangtianyu 1, SM) and waxy maize (Kexiangluoyu 1, WM), were examined based on chemical composition, in vitro gas production and in situ incubation techniques. Maize stover was sampled at d 17 and d 30 after tasseling, and designated as maturity stage 1 and stage 2, respectively. The average dry matter (DM) organic matter (OM), crude protein (CP) and fiber contents were the greatest for HOM, SM and FM, respectively. CM had the highest in vitro organic matter disappearance (IVOMD) and volatile fatty acid (VFA) concentration. The highest ammonia nitrogen ($NH_3$-N) concentration in the incubation solution, and effective degradability of DM ($ED_{DM}$) and neutral detergent fiber ($ED_{NDF}$) were observed in SM. Advanced maturity stage increased (p<0.05) DM content, $ED_{DM}$ and $ED_{NDF}$, but decreased (p<0.05) OM and CP contents, and decreased (p<0.05) b and a+b values, IVOMD and molar proportion of valerate in the incubation solution for maize stover. Maize sown in summer had greater (p<0.05) OM content, but lower DM, CP, neutral detergent fiber (NDF) and acid detergent fiber (ADF) content compared with maize sown in spring. Maize sown in summer had greater (p<0.001) IVOMD, $NH_3$-N concentration in the incubation solution and $ED_{NDF}$, but lower (p<0.01) ratio of acetate to propionate compared to maize sown in spring. The interaction effect of variety${\times}$seedtime was observed running through almost all chemical composition, in vitro gas production parameters and in situ DM and NDF degradability. The overall results suggested that SM had the highest nutrient quality, and also indicated the possibility of selecting maize variety and seedtime for the utilization of maize stover in ruminants.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.4
• /
• pp.55-61
• /
• 2001

There are many reservoirs used as the source of water supply and they show various specific characteristics in water quality depend seasonal. Especially, there were not a little variations of water quality in summer, as a natural consequence it follows that stratification occured phenomenon and changed anaerobic condition in the bottom of reservoir, and then accumulated Fe and Mn substance in soil and sediment were resolved into water, it attributes to coloration. G purification plant located in Y gun is very small plant in which coloration occurs by Fe and Mn in every summer. Using this plant as a model, the removal methods of Fe and Mn were studied. After prechlorination plus LAS coagulation, Fe, Mn, $NH_3-N$ were decreased from 7.290 mg/l to 0.080 mg/l, from 0.480 mg/l to 0.075 mg/l, from 0.55 mg/l to 0.04 mg/l. But $THM_{s}$ was increased from 0.050 mg/l to 0.044 mg/l. It shows that the prechlorination plus LAS coagulation treatment process in purification plant is effective to remove Fe and Mn ion.

• ALGAE
• /
• v.28 no.1
• /
• pp.111-119
• /
• 2013

Marine microalgae are a promising source of organisms that can be cultured and targeted to isolate the broad spectrum of functional metabolites. In this study, two species of cyanobacteria, Chlorella ovalis Butcher and Nannchloropsis oculata Droop, one species of bacillariophyta, Phaeoductylum tricornutum Bohlin, and one species of Dinophyceae, Amphidinium carterae (Hulburt) were cultured and biomasses used to evaluate the proximate comical compositions. Among the determined proximate chemical compositions of the cultured marine microalgae, the highest content of crude proteins and lipids were exhibited in P. tricornutum and A. carterae, respectively. Solvent-solvent partition chromatography was subjected to fractionate each of the cultured species and separated n-hexane, chloroform, ethyl acetate, and aqueous fractions. Nitric oxide production inhibitory level (%) and cytotoxicity effect on lipo-polysaccharide-induced RAW 264.7 macrophages were performed to determine the anti-inflammatory activity. N. oculata hexane and chloroform fractions showed significantly the strongest anti-inflammatory activity at $6.25{\mu}g\;mL^{-1}$ concentration. The cancer cell growth inhibition (%) was determined on three different cell lines including HL-60 (a human promyelocytic leukemia cell line), A549 (a human lung carcinoma cell line), and B16F10 (a mouse melanoma cell line), respectively. Among the extracts, C. ovalis ethyl acetate and A. carterae chloroform fractions suppressed the growth of HL-60 cells significantly at 25 and $50{\mu}g\;mL^{-1}$ concentrations. Thus, the cultured marine microalgae solvent extracts may have potentiality to isolate pharmacologically active metabolites further using advance chromatographic steps. Hence, the cultured marine microalgae can be described as a good candidate for the future therapeutic uses.

• Journal of Nutrition and Health
• /
• v.24 no.2
• /
• pp.124-131
• /
• 1991

This study was to examine the effects of dietary protein levels and the sources of protein(animal and plant) on calcium and phosphorus metabo lism in 10 healthy Korean female adults. The 26­d day study consisted of a 6-day adaptation period and lO-day moderate protein(109 N, 550mg Ca) a and IO-day high protein( 14g N, 570mg Ca) pe­r riod. During the experimental period, the subjects w were divided into two groups, either consuming a animal protein diet(75 % animal protein) or plant protein diet(75 % plant protein). Calcium(300 mg) was supplemented to two subjects of each d dict group for the last 4 days. Feces, urine and diet were analyzed nitrogen. calcium and phos­p phorus. The apparent absorption of calcium was significantly increased as the protein intake was inc­r reased from 60g to 90g in animal protein diet. A Average calcium absorption rate was 30% and 46 % from high and moderate levels of animal p protein diet Urinary calcium excretion was not affected by t the amount of the protein intake in both animal and plant protein diet. There was significantly higher urinary calcium excretion(I34mg) in high I level of animal protein diet than that( 83mg) in h high level of plant protein diet. Calcium balance was improved as the protein intake increased and c calcium was supplemented. Phosphorus absorp­t tion was more efficient in the high animal diet(77.81 %) than in the high plant diet(55-65%). The overall results indicate that an increase of protein and calcium supplement in moderate pro­ttein intake can improve calcium balance due to the increase of calcium absorption.

• Journal of Animal Science and Technology
• /
• v.44 no.1
• /
• pp.55-60
• /
• 2002

Two experiments were conducted to investigate the effect of dietary supplementation of plant phytase (Phytazyme$^{(R)}$) in corn-soybean meal based diets on utilization of phytase-bound phosphorus in laying hens and evaluate nitrogen(N) digestibility and phosphorus(P) availability in breeders. In the experiment one, three levels of the Phytazyme$^{(R)}$(0.05, 0.1, and 0.2% of diet) were added to diets containing a half of control TCP level(0.96%) for 4 wks. Feed consumption, egg production rate, egg weight and eggshell quality were recorded weekly. At the end of experiment, 8 birds per treatment were sacrificed, liver weight were weighed and right tibiae were removed for determination of P content. The second experiment was conducted to evaluate the P availability and nitrogen digestibility in breeders fed same diets for 2 wks. Feed and excreta were collected to determine the P and N contents for the last three days of experiment two. Addition of Phytazyme$^{(R)}$ resulted in no effects on feed intake, egg product rate, egg weight and egg shell quality. P excretion decreased and its availability enhanced as phytase supplementation increased in diets. Dietary supplementation of Phytazyme$^{(R)}$ above 0.1% level in corn-soybean meal based diets did not have an adverse effect on production and decreased level of phosphorus in excreta.

• Journal of Environmental Health Sciences
• /
• v.24 no.1
• /
• pp.87-97
• /
• 1998

This study was performed to investigate the Natural mineral water quality at 47 sites in Chonnam area, samples were collected spring, summer, fall, winter for a seasonal variation in 1996. The results obtained were summarized as follows 1. The mean of F, pH, HCO$_3$, NO$_3$ -N were 0.19 mg/l, 6. 9, 34.99 mg/l, 1.40 mg/l and those of Na, K, Ca, Mg were 12.1 mg/l, 1.2 mg/l, 7.7 mg/l, 2.1 mg/l respectively. 2. The contents of F were reasonable at Multonggol as 1.35 mg/l and Yongbayui as 0.57 mg/l respectively, but there is no detected at Sidong and detected below 0.1 mg/l at Gubongsan, Hansansa area. 3. According to the geological effect, the content of F was showed higher in granite than in tuff, and index of pH was higher in tuff than in andesite, and content of HCO$_3$ was higher in andesite than in granite. 4. The K and O values were used as index of healthy and delicious water. As a result, thirtyfive sites(74.5%) was decided as healthy and delicious water. 5. The contents of NO$_3$-N were detected over 5 mg/l at Sukchonsa, Gajanggol, Yudalsan, Muchang, Kisan.