• Journal of electromagnetic engineering and science
• /
• v.3 no.1
• /
• pp.50-56
• /
• 2003

This paper proposes a coding scheme of control channel for mobile packet communication to maximize the minimum Hamming distance, which is based on shifting of basis vectors of Reed Muller code with optimized dynamic puncturing and/or(partial) sequence repetition. Since the maximum likelihood decoding can be performed using the extremely simple FHT(Fast Hadamard Transformation), it is suitable for real time optimum decoding of control channel information with very little complexity. We show applications of the proposed coding method to TFCI(Transport Format Combination Indicator) code in split and normal modes of 3GPP W-CDMA system. We also discuss how this method can reduce rate indication error over AWGN(Additive White Gaussian Noise) as well as fading channels when the proposed coding scheme is applied to 1xEV-DV system of $3^{rd}$TEX> generation partnership project 2(3GPP2) to indicate the data rate transmitted on the reverse traffic channel by a Mobile Station(MS).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.9
• /
• pp.32-39
• /
• 2006

In this paper, an iterative subspace-based calibration algorithm for a CDMA-based antenna array in the presence of unknown gain and phase error is presented. The algorithm does not depend on the array geometry and does not require a prior knowledge of the Directions Of Arrival (DOA) of the signals. The method requires the code sequence of a reference user only. The proposed algorithm is based on the subspace method and root finding approach, and it provides estimates of the calibration vector, the DOA and the channel impulse response, by using the code sequence of a reference user. The performance of the proposed algorithm was investigated by means of computer simulations and was verified using field data measured through a custom-built W-CDMA test-bed. The data show that experimental results match well with the theoretical calibration algorithm. Also, teh study propose an efficient algorithm using the simulated annealing technique. This algorithm overcomes the requirement of initial guessing in the subspace-based approach.

• ETRI Journal
• /
• v.29 no.4
• /
• pp.463-469
• /
• 2007

A phase-locked loop (PLL) is described which is operable from 0.4 GHz to 1.2 GHz. The PLL has basically the same architecture as the conventional analog PLL except the locking information is stored as digital code. An analog-to-digital converter is embedded in the PLL, converting the analog loop filter output to digital code. Because the locking information is stored as digital code, the PLL can be turned off during power-down mode while avoiding long wake-up time. The PLL implemented in a 0.18 ${\mu}m$ CMOS process occupies 0.35 $mm^2$ active area. From a 1.8 V supply, it consumes 59 mW and 984 ${\mu}W$ during the normal and power-down modes, respectively. The measured rms jitter of the output clock is 16.8 ps at 1.2 GHz.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.453-458
• /
• 2007

The importance of the evaluation and verification of small-size cogeneration system has been emphasized because there is no KS-code related to the small-size cogeneration system. The evaluation method of small-size engine cogeneration system was investigated by the reference of Japan evaluation code, JIS B-8122 and international standard organization, ISO-8528. Evaluation method was introduced such as start-test, rapid-load-up and rapid-load-down, etc. The evaluation method was applied to the 300kW small-size gas engine cogeneration system newly developed. The precise and strict evaluation and verification of the system will help the developing cogeneration system to optimum condition. It will also be a base document of KS-Code.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.446-452
• /
• 2018

To improve the accuracy and safety of irradiation tests in High flux Advanced Neutron Application ReactOr (HANARO), the nuclear energy deposition rate, which is called nuclear heating, was estimated for an irradiation capsule with an iridium sample in the irradiation hole in order. The gamma rays emitted from the radioisotopes (RIs) of the structural materials such as flow tubes of fuel assemblies and heavy water reflector tank were considered as radiation source. Using the ORIGEN2.1 code, emission rates of delayed gamma rays were calculated in consideration of the activation procedure for 8 years and 2 months of HANARO operation. Calculated emission rates were used as a source term of delayed gamma rays in the MCNP6 code. By using the MCNP code, the nuclear heating rates of the irradiation capsules in the inner core, outer core, and heavy water reflector tank were estimated. Calculated nuclear heating in the inner core, outer core, and heavy water reflector tank were 200-260 mW, 80-100 mW, and 10 mW, respectively.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.21-24
• /
• 2000

In this paper, We introduce effective handoff method from W-COMA system of 3$^{rd}$ generation to 15-95 system of 2$^{nd}$ generation. In case of this handoff, Ms should know long code state using traffic channel, timing information and pilot offset of 26 synchronous system during the compressed mode. So We establish additional common channel in order to obtain handoff information. Common channel transmits same information from all base stations and provides MS with timing information of zero offset. long code state and timing of super frame for sync. channel. Therefore during the compressed mode. MS can obtain information for handoff using common channel..

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.1990-1997
• /
• 2020

To support the safe operation of the Miniature Neutron Source Reactor (MNSR), a thermo-hydraulic transient model using the RELAP5/Mod3.2 code was simulated. The model was verified by comparing the results with the measured and the previously calculated data. The comparisons consisted of comparing the MNSR parameters under normal constant power operation and reactivity insertion transients. Reactivity Insertion Accident (RIA) for three different initial reactivity values of 3.6, 6.0, and 6.53 mk have been simulated. The calculated peaks of the reactor power, fuel, clad and coolant temperatures in hot channel were calculated in this model. The reactor power peaks were: 103 kW at 240 s, 174 kW at 160 s and 195 kW at 140 s, respectively. The fuel temperature reached its maximum value of 116 ℃ at 240 s, 124 ℃ at 160 s and 126 ℃ at 140 s respectively. These calculation results ensured the high inherently safety features of the MNSR under all phases of the RIAs.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.310-315
• /
• 1998

This study includes noise automatic inspection system for washing machine auto-transmission one of modern home necessary. We effort to find and certificate sound noisesource by sound power and sound intensity, and apply to frequency analysis in vibration related sound noise. Still more we have been studying to data acquisition and programming for MS VisualBasic version 5.0. System component is below. 1) Pentium PC for data acquisition. 2) DSO for noise acquisition. 3) S/W for comparison and decision. 4) I/F Board for data communication. Wave form data through the DSO are converting to ASCII code data. The ASCII code through binary converting S/W are to be decision fitness or the badness comparison S/W. Finally, we will making noise monitoring system and automatic inspection system.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.4
• /
• pp.207-215
• /
• 2009

In recent digital communication systems, the performance of Turbo Code used as the error correction coding method depends on the interleaver size influencing the free distance determination and iterative decoding algorithms of the turbo decoder. However, some iterations are needed to get a better performance, but these processes require large time delay. Recently, methods of reducing the number of iteration have been studied without degrading original performance. In this paper, the new method combining ME (Mean Estimate) stopping criterion with SDR (sign difference ratio) stopping criterion of previous stopping criteria is proposed, and the fact of compensating each method's missed detection is verified Faster decoding realizes that reducing the number of iterative decoding about 1~2 times by adopting our proposed method into serially concatenation of both decoder. System Environments were assumed DS-CDMA forward link system with intense MAI (multiple access interference).

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.1
• /
• pp.1-14
• /
• 2018

The Global Positioning System (GPS) provides more accurate positioning estimation performance by processing L1 and L2 signals simultaneously through dual frequency signal processing technology at the L-band rather than using only L1 signal. However, if anti-spoofing (AS) mode is run at the GPS, the precision (P) code in L2 signal is encrypted to Y code (or P(Y) code). Thus, dual frequency signal processing can be done only when the effect of P(Y) code is eliminated through the L2 signal processing technology. To do this, a codeless technique or semi-codeless technique that can acquire phase measurement information of L2 signal without information about W code should be employed. In this regard, this paper implements L2 signal processing technology where two typical codeless techniques and four typical semi-codeless techniques of previous studies are applied and compares their performances to discuss the optimal technique selection according to implementation environments and constraints.