• Economic and Environmental Geology
• /
• v.26 no.1
• /
• pp.41-54
• /
• 1993

The Ulsan Fe-W deposit, which can be classified as a calcareous skarn deposit, is represented by ore pipe consisting principally of magnetite and lesser amounts of scheelite with minor sulphides, sulphosaits, arsenides, sulpharsenides, etc. At Ulsan mine, metasomatic processes of skarn growth may be divided broadly into two stages based on the paragenetic sequence of calc-silicate minerals and their chemical composition; early and late skarn stages. Early stage has started with the formation of highly calcic assemblages of wollastonite, diopsidic clinopyroxene and nearly pure grossular, which are followed by the formation of clinopyroxenes with salite to ferrosalite composition and grandite garnets with intermediate composition. Based on these calc-silicate assemblages, the temperatures of early skarn formations have been in the ranges of $550^{\circ}$ to $450^{\circ}$. The calc-silicate assemblages formed during the earlier half period of late skarn stage show the enrichment of notable iron and slight manganese, and the depletion of magnesium; clinopyroxenes are hedenbergitic, and grandite garnets are andraditic. The formation temperatures during this skarn stage are inferred to have been in the range of $430^{\circ}$ to $470^{\circ}C$ at low $X_{CO_2}$ by data from fluid inclusions of late andraditic garnets. The later half period of late skarn stage is characterized by the hydrous alteration of pre-existing minerals and the formation of hydrous silicates. The main iron-tungsten mineralization representing prominent deposition of magnetite immediately followed by minor scheelite impregnation has taken place at the middle of early skarn stage, while complex polymetallic mineralization has proceeded during and after the late skarn stage. Various metals and semimetals of Fe, Ni, Co, Cu, Zn, As, Mo, Ag, In, Sn, Sb, Te, Pb and Bi have been in various states such as native metal, sulphides, arsenides, sulphosaits, sulpharsenides and tellurides.

• Applied Microscopy
• /
• v.15 no.1
• /
• pp.31-58
• /
• 1985

The morphological study on different types of cells of reproductive organ including spermatogenesis in the adult planaria was performed to observe their cytochemical and ultrastructural characteristics. 1. Spermatogenesis The circular luminated material appears immediately inside the nuclear envelope of early spermatid and is found also in the nucleus of sperm, but typical acrosomal structures cannot be observed. Approximately ten of small-sized mitochondria occur around the nucleus in the transitional phase from primary spermatocyte to secondary spermatocyte, but in sperm a long mitochondrion is closely associated with nucleus, parellel to long axis of it. The sperm has a relatively long head connected with two tails via hollow neck. 2. Reproductive organ The penis bulb and the bursa stalk were observed. (1) Penis bulb The cells constituted penis bulb are classified into six types on the basis of ultrastructure of the cells and cytochemistry of the cytoplasmic granules. 1) A-type cells: These cells exhibiting low electron density are mainly occupied by large nucleus. These cells possess two different types of granules: highly electron-dense round granules with an average size of $0.9{\mu}m$, and electron-dense granules exhibit PAS-positive reaction. 2) B-type cells contain PAS-positive granules with the size of about $0.4{\mu}m$. They are rich in free ribosomes and mitochondria. 3) C-type cells are found to be dark cells due to high electron-density. These cells are largely occupied by large nucleus. 4) D-type cells: These cells are seen as light cells which have poorly developed cell organelles. 5) E-type tells: These cells contain a large number of glycogen granules which occupy most of cell. 6) F-type cells: These arc parietal epidermal cells surrounding the genital antrum. These cells are characterized by their finger-like shapes and the presence of a number of electron-dense, irregularly-shaped structures inside cells. The relatively large electron-lucent granules can be also found. The F-type cells possess numerous microvilli on their free surfaces. (2) Bursa stalk The cells constituted bursa stalk are classified into 3 types on the basis of cell shapes and presences of electron-dense or electron-lucent granules. 7) G-type cells with a long cytoplasmic process. They have large nuclei and poorly developed cell organelles. 8) H-type cells: These cells are characterized by the presence of a long cytoplasmic process and relatively highly electron-dense cytoplasmic profile. They have poorly developed cell organelles. 9) I-type cells contain large electron-lucent granules which exhibit negative reactions with three kinds of cytochemical staining methods used in this experiment. The fine electron-dense structures can be found inside these granules.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.4
• /
• pp.301-308
• /
• 2004

This experiment was carried out to classify heading date of forage rye cultivars, and study agronomic characteristics, dry matter yield per ha and forage quality of winter rye cultivars in Suwon for 2 year from 2002 to 2003. The earliest cultivars among forage winter rye cultivars were Olhomil and Vitagrazer, which the heading date was April 21. The latest cultivar was Danko, which was May 5. Koolgrazer was April 26 and Homil 22 was April 30, respectively. Therefore, we classified the cultivars into three groups according to their heading date. The earliest group includes Olhomil, Vitagrazer, Paldanghomil, the middle group includes 5 cultivars which are Koolgrazer, Barrgazer, Maton, Wintergrazer and Homil22, and the latest group contains Humbolt and Danko. The number of tiller per $m^{2}$ of most cultivars were more than 1,000. The cultivar which has lowest tiller was Humbolt, which dry matter yield was the largest, and its tiller was 789. The lodging happened after each precipitation. Danko was the cultivar that has lowest lodging frequency. There has been little disease and insect and the difference in the quality of each cultivar. The yield of dry matters per ha of Humbolt was increased $123\%$, Vita grazer $121\%$, Maton $113\%$ comparing the standard cultivar, Kool grazer of 12,409kg, and Homil 22 was almost the same with the standard cultivar.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.4
• /
• pp.335-340
• /
• 2004

This experiment was conducted to compare the dry matter yields and feed values of summer forage crops such as two cultivars of Maize, two cultivars of Sorghum hybrid and one Japanese millet at the Dae-Ho reclaimed tideland, Korea from 2002 to 2003. Seasonal changes of soil salt content maintained somewhat low at early stage and increased at growing stage and then decreased at harvest time. The dry matter yield was 6,102, 4,557 and 2,928 kg/ha, respectively, for Japanese millet Sorghum hybrid and Maize. The highest Crude protein(CP) content was recorded in sorghum hybrid. Neutral detergent fiber.(NDF) and acid detergent fiber(ADF) contents were highest in Japanese millet following Sorghum hybrid and Maize in turn. The highest sodium content in plant tissue was recorded in Japanese millet. These results suggest that Japanese millet is the most suitable summer forage crops for cultivation on reclaimed tideland in view of the good emergence and forage production.

• Korean Journal of Food Science and Technology
• /
• v.46 no.6
• /
• pp.682-688
• /
• 2014

The in vitro digestibility and molecular and crystalline structures of rice starches (Seilmi, Dasan1, and Segoami) with differing amylose content were investigated. Segoami had the highest amylose content (30.9%), whereas Dasan1 had the lowest amylose content (21.2%). The molecular weight ($\bar{M}_w$) of amylose and amylopectin in Segoami was much lower than that of the other two rice starches. Segoami had the highest proportion (8.7%) of amylopectin short branch chains (DP 6-12) and the lowest proportion of B1 chains (DP 13-24). The relative crystallinity, intensity ratio of $1047-1022cm^{-1}$ (1047/1022) and gelatinization enthalpy followed the order: Segoami>Seilmi~Dasan1. Segoami showed substantially low pasting viscosity. Rapidly digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) contents showed the highest value in Seilmi, Dasan1, and Segoami, respectively. The expected glycemic index (eGI) of Segoami was lower than that of the other two rice starches. Overall results suggested that the digestibility of rice starch could be highly influenced by their molecular and crystalline structure.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.39-39
• /
• 2018

최근 플라즈마 의학이 발달하면서 제트, 펜, 니들, 토치 등의 다양한 형태의 플라즈마 발생기가 개발되었으며 내부의 가스라인으로 가스의 종류, 유속, 조성 등을 조절하여 생물학적 효과를 극대화 할 수 있고 안정적으로 플라즈마 방전상태를 유지할 수 있으나 처리 면적이 좁아 실제 생물학적 시스템 (세포, 조직, 그리고 박테리아) 적용에 있어 한계점이 존재한다. 이러한 한계점을 극복하기 위해서 유전체격벽방전 (Dielectric barrier discharge, DBD) 방식을 이용한 플렉서블 활성종 발생기를 제작하고 생물학적 시스템에 적용하기 위한 방전 특성 평가를 진행하였으며, 간단한 in vitro 모델인 한천 젤을 이용하여 플라즈마 처리에 따른 전달물질의 침투거리를 확인하였다. 플라즈마 방전 시 생성되는 수산화기 [OH], 과산화수소 [$H_2O_2$], 초산소음이온 [$O_2{^-}$], 오존 [$O_3$], 그리고 산화질소 [$NO_x$]와 같은 산소 및 질소 활성종 (Reactive oxygen and nitrogen species, RONS)은 세포벽 또는 세포막의 주요 구성성분인 다당류와 인지질의 과산화 반응을 통해 구조를 변화시키고 생물학적 시스템의 표면의 pH를 낮춘다. 이러한 RONS의 작용은 살균, 소독 뿐만 아니라 약물의 침투를 돕는다. 일반적으로 한천 겔은 농도에 따라 생체 내 뇌 조직과 물리적 특성이 유사하고, 미생물학 기질, 방사선학 연구를 위한 조직모델로 사용되기 때문에 본 연구에서는 3%와 5% 농도의 한천 젤을 사용하여 침투거리를 확인하였다. 한천 젤은 $2.5{\times}2.5{\times}2.5cm^3$의 크기로 준비되었고 대조군으로 염료가 포함된 에멀젼을 0.01 g 도포하고, 실온에서 30분간 보존 후 단면을 잘라 현미경으로 침투거리를 확인하였으며, 실험군으로 플라즈마 전처리 후 에멀젼을 도포한 시표와 에멀젼 도포 후 플라즈마 처리한 시료에 대해 에멀젼 침투거리의 변화를 확인하였다. 본 연구의 플렉서블 활성종 발생기는 인체에 부착하여 사용되기 때문에 화상, 홍반을 유발을 방지하기위해 $40^{\circ}C$의 온도에서 실험을 진행하였고 이때에 플라즈마 방전조건은 $0.065W/cm^2$ 수준의 전력을 소모하는 1.7 kV의 전압, 16 kHz의 주파수로 10분간 처리하였다. 그 결과 3%의 한천 젤의 경우 침투거리 0.779 mm에서 0.826 mm, 0.942 mm까지 침투거리가 증가하였고 5%의 한천 젤의 경우 0.859 mm, 0.949 mm로 증가하였다. 이러한 침투거리 증가는 젤 표면의 다당류를 구성하고 있는 단량체가 플라즈마 처리시 화확적 구조가 끊어져 결론적으로 약물 침투가 증가된 것으로 판단된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.111-118
• /
• 2014

The present study concerns the leachability of alkali ions from hardened cement paste in terms of an increase in the pH together with the rate of alkali leaching. To evaluate the influence of mix design on the leaching capacity and rate of alkali, different water-cement ratios (W/C) and binders were used to manufacture paste specimens. The cement paste was made in the form of rectangular bucket where deionised water was subsequently supplied as solvent media. Then the specimen was wrapped in polythene film to avoid contact to atmospheric conditions, which may affect the water chemistry in the bucket. The pH of media was monitored until no further change in the pH value was observed, of which value then used to calculate the leaching capacity and rate. The influence of binder on the pH of solvent is more dominant than that of water to cement ratio: OPC paste produced the highest level of alkali leaching, whilst 30% PFA and 60% GGBS pastes imposed lower level of alkali leaching. After the monitoring of the pH, the inner bucket was ground with an increment of 1.0 mm to measure the leaching influence using the suspension consisting of paste powder and deionised water. It was found that the impact zone for OPC was about 7-8 mm, whilst 30% PFA and 60% GGBS had deeper impact depth of the alkali leaching.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.759-766
• /
• 2003

Two experiments were conducted to evaluate the nutritive values of defatted rice bran (DRB) and examine the effects of its dietary supplementation on broiler performances. In Experiment 1, to measure true metabolizable energy (TME), nitrogen corrected true metabolizable energy (TMEn), and true amino acid availability (TAAA), 30g of DRB sample was forced-fed to each of 16 ISA-Brown roosters followed by a 48h collection of excreta. The TME and TMEn values for DRB were 2.19 kcal/g and 2.05 kcal/g, respectively. The mean value of TAAA of the 15 amino acids in DRB was 77.29%. In Experiment 2, a total of 72 Avian broiler chicks were divided into 4 groups with 3 replicates of 6 birds per replicate, and fed one of the experimental diets containing 0, 5, 10 or 15% of DRB. Feed intake, weight gain, feed conversion rate, and body composition were measured for 3 weeks. Although there were no significant differences (P$\geq$0.05), body weight gain and feed intake of chickens fed a diet containing 15% DRB were slightly higher than those of the other groups. From these results, it can be concluded that feed formulation using TMEn and TAAA of DRB is an effective method for assuring feed quality and DRB can be supplemented to broiler rations up to 15% level.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.464-472
• /
• 1996

The mechanism of thin-film formation by Ionized Cluster Beam Deposition(ICBD) was investigated. A simulation program based on the Monte-Carlo method was developed in order to investigate the effects of the acceleration voltage, substrate temperature, activation energy for the surface migration, and critical nuclei size on grain size and surface roughness. Studies of the effect of kinetic energy of clusters on the film formation processes revealed that high acceleration voltage enhanced the surface-migration of adatoms and made it easier for an epitaxial film to be formed. The relaxation time of kinetic energy of adatoms increased with the substrate temperature, which in turn increased the grain size of the crystalline film. This effect was more clearly distinguished when the critical nuclei size was large. The surface-migration activation energy was found to affect the interaction between the adatoms and the substrate and thus the relaxation time of kinetic energy. Investigations of the surface roughness revealed that the acceleration voltage, the substrate temperature, and the surface-migration activation energy exerted a collective effect on the morphology of the film surface.

• Atmosphere
• /
• v.21 no.1
• /
• pp.57-67
• /
• 2011

Aerosol lidar ratio (extinction-to-backscatter ratio) at 532 nm was determined using 4-year measurements of elastic-backscatter lidar and sky radiometer at Seoul National University of Seoul, Korea. The mean lidar ratio (with standard deviation) based on 4 years of measurements is found to be $61.7{\pm}16.5$ sr, and weak seasonal variations are noted with a maximum in JJA ($68.1{\pm}16.8$ sr) and a minimum in DJF ($57.2{\pm}17.9$ sr). The lidar ratios for clean, dust, and polluted conditions are estimated to be $45.0{\pm}9.5$ sr, $51.7{\pm}13.7$ sr, and $62.2{\pm}13.2$ sr, respectively. While the lidar ratio for the polluted condition is appears to be consistent with previous studies, clean and dust conditions tend to have larger ratios, compared to previous estimates. This discrepancy is thought to be mainly due to the anthropogenic aerosols existing throughout the year around Seoul, which may cause increased lidar ratios even for clean and dust conditions.