• Bulletin of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.110-117
• /
• 2000

A series of new liquid crystalline dimesogenic compounds with chiral tails was synthesized, and their thermal and liquid crystalline properties were studied. The chain length of the central polymethylene spacers (x) was varied from dimethylene (2) to decamethylene (12). These compounds were characterized by elemental analysis, IR and NMR spectroscopy, differential scanning calorimetry (DSC), and cross-polarizing microscopy. All compounds were found to be enantiotropically liquid crystalline, and the values of melting ($T_m$) and isotropization temperature ($T_i$) as well as enthalpy change (Δ$H_i$) and entropy change for isotropization (Δ$S_i$) decreased in a zig-zag fashion revealing the so-called odd-even effect as x increases. Their mesomorphic properties fall into three categories depending upon x; (a) compounds with x=2 and 4 formed two different mesophases, smectic and cholesteric phases in that order on heating, and vice versa on cooling, (b) compounds with x=3, 7, 8, 10 and 11 reversibly formed only the cholesteric phase, and (c) compounds with x=5, 6, 9 and 12 exhibited only a cholesteric phase on heating, whereas on cooling they formed two different mesophases, cholesteric and smectic phases, sequentially.

• Journal of Magnetics
• /
• v.18 no.1
• /
• pp.39-42
• /
• 2013

We studied the structural and electrical properties of $SrRuO_3$ thin films grown on $SrTiO_3$ (110) substrate. High resolution X-ray diffraction measurement of the grown film showed 1) very sharp peaks for $SrRuO_3$ film with a very narrow rocking curve with FWHM = $0.045^{\circ}$ and 2) coherent growth behavior having the same in-plane lattice constants of the film as those of the substrate. The resisitivity data showed good metallic behavior; ${\rho}$ = 63(205) ${\mu}{\Omega}{\cdot}cm$ at 5 (300) K with a residual resistivity ratio of ~3. The observed kink at ${\rho}(T)$ showed that the ferromagnetic transition temperature was ~10 K higher than that of $SrRuO_3$ thin film grown on $SrTiO_3$ (001) substrate. The observed rather lower RRR value could be partially due to a very small amount of Ru vacancy generally observed in $SrRuO_3$ thin films grown by PLD method and is evident in the larger unit-cell volume compared to that of stoichiometric thin film.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.10
• /
• pp.1512-1518
• /
• 2015

This experiment was conducted to assess the welfare and productivity of gestating gilts in groups with the electronic sow feeding (ESF) system compared to conventional stalls. A total of 83 gilts ($Yorkshire{\times}Landrace$) were housed into individual stalls to be artificially inseminated. Gilts confirmed pregnant were introduced to their treatment, conventional stalls (ST) or groups with the ESF system. All gilts were taken to the farrowing crates one week prior to their expected farrowing date. In the gestation period, there were no significant differences between gilts allocated to ST and ESF on growth performance. However, backfat thickness gain (p = 0.08) and body condition score (BCS) at 110 days of gestation (p = 0.10) tended to be higher in ESF gilts than ST. Likewise, gilts housed in group showed significantly higher estimated body muscle contents at 110 days of gestation (p = 0.02) and body muscle change during gestation (p = 0.01). There was a trend for a shorter parturition time in ESF gilts (p = 0.07). In the lactation period, group housed gilts showed a tendency to increased BCS changes (p = 0.06). Reproductive performance did not differ with the exception of piglet mortality (ST = 0.2 no. of piglets vs ESF = 0.4 no. of piglets; p = 0.01). In blood profiles, ST gilts showed a higher cortisol level at 110 days of gestation (p = 0.01). Weaning to estrus interval was shorter in gilts housed in ESF than ST (p = 0.01). In locomotory behaviors, ESF gilts recorded a tendency to elevate locomotion score at 36, 70, and 110 days of gestation (p = 0.07, p = 0.06, and p = 0.06, respectively). Similarly, ESF gilts showed significantly higher incidence of scratches at 36, 70, and 110 days of gestation (p = 0.01). Moreover, farrowing rates were higher in stall treatment (97.6%) compare to group housing treatment (95.2%). In conclusion, while group housed gilts with ESF system positively affected welfare status in combination with less physiologically stressful environments and activity, it negatively effects piglet mortality, farrowing rates and injuries of gilts.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.12-18
• /
• 2001

The water-soluble extracts of plants used as tea materials were investigated for their antioxidant activities and active components(total phenolics, ascorbate and selenium). Antioxidant activities of the plant extracts were determined by measuring the changes in both peroxide values(POV method) during storage(36 day, $55^{\circ}C$) and conductivity of soybean oil at $110^{\circ}C$(Rancimat method). Soybean oil without any additive was used as a control. Soybean oil treated with 0.02% BHT was used as a positive control. The test samples were prepared by mixing the plant extracts with soybean oil in 0.02% concentration by weight. The water-soluble extracts of lycii fructus(23 d), oolong tea(23 d), orange peel(23 d), citron(22 d), and apricot(22 d) showed longer induction periods, compared to control(21 d) and BHT(21 d) by POV method. Also water-soluble extracts of oolong tea(12 h), instant coffee(11 h), citron(10 h), cinnamomi cortex(10 h), schizandrae fructus(10 h), lycii fructus(10 h) and apricot(10 h) demonstrated longer induction periods, compared to control(8 h) and BHT(8 h) by Rancimat method. The contents of total phenolic compounds were observed to be high in water-soluble extracts of oolong tea, green tea, black tea, coffee, cinnamomi cortex, and cassiae semen. Ascorbate contents were found to be high in coffee, eucommiae cortex, black tea, ganoderma, cinnamomi cortex, persimmon leaf, chicory, green tea and oolong tea extracts. The selenium contents were not detected in all the extracts. The antioxidative effects of some plant extacts were seemed to be the combined effects of various antioxidant components such as phenolics and ascorbate.

• Journal of the Korean earth science society
• /
• v.39 no.3
• /
• pp.228-240
• /
• 2018

Solar energy is calculated using meteorological (14 station), ceilometer (2 station) and microwave radiometer (MWR, 7 station)) data observed from the Weather Information Service Engine (WISE) on the Seoul metropolitan area. The cloud optical thickness and the cloud fraction are calculated using the back-scattering coefficient (BSC) of the ceilometer and liquid water path of the MWR. The solar energy on the surface is calculated using solar radiation model with cloud fraction from the ceilometer and the MWR. The estimated solar energy is underestimated compared to observations both at Jungnang and Gwanghwamun stations. In linear regression analysis, the slope is less than 0.8 and the bias is negative which is less than $-20W/m^2$. The estimated solar energy using MWR is more improved (i.e., deterministic coefficient (average $R^2=0.8$) and Root Mean Square Error (average $RMSE=110W/m^2$)) than when using ceilometer. The monthly cloud fraction and solar energy calculated by ceilometer is greater than 0.09 and lower than $50W/m^2$ compared to MWR. While there is a difference depending on the locations, RMSE of estimated solar radiation is large over $50W/m^2$ in July and September compared to other months. As a result, the estimation of a daily accumulated solar radiation shows the highest correlation at Gwanghwamun ($R^2=0.80$, RMSE=2.87 MJ/day) station and the lowest correlation at Gooro ($R^2=0.63$, RMSE=4.77 MJ/day) station.

• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.216-220
• /
• 1996

In the present paper, a new type of DC arc plasma torch is disclosed. The principles of the new magnetic and fluid dynamic controlled large orifice long discharge tunnel plasma torch is discussed. Two series of DC Plasma Jet diamond film deposition equipment have been developed. The 20kW Jet equipped with a $\Phi$70 mm orifice torch is capable of deposition diamond films at a growth rate as high as 40$\mu\textrm{m}$/h over a substrate area of $\Phi$65 mm. The 100kW high power Jet which is newly developed based on the experience of the low power model is equipped with a $\Phi$120 mm orifice torch, and is capable of depositing diamond films over a substrate area of $\Phi$110 mm at growth rate as high as 40 $\mu\textrm{m}$/h, and can be operated at gas recycling mode, which allows 95% of the gases be recycled. It is demonstrated that the new type DC plasma torch can be easily scaled up to even higher power Jet. It is estimated that even by the 100kW Jet, the cost for tool grade diamond films can be as low as less than ＄4/carat.

• Natural Product Sciences
• /
• v.21 no.2
• /
• pp.104-110
• /
• 2015

The activities on the inhibition of NO on LPS-induced RAW 264.7 macrophages were investigated in this work. A simple and sensitive method has been developed and validated for fingerprinting analysis of leaves of Acanthopanax gracilistylus W.W. Smith (AGS). The cytotoxicity and inhibition of NO on LPS-induced RAW 264.7 cells of the extract and triterpenoids were determined. Optimal conditions of HPLC analysis were established as follows. The separation was performed with an ODS-C₁₈ column at $30^{\circ}C$, the detected wavelength was 210 nm, the flow rate was 1 mL/min, and the mobile phase consisted of acetonitrile (0.05% phosphoric acid)-0.05% phosphoric acid solution with gradient elution. Our results showed that impressic acid and acankoreaogenin was more effective on the inhibition of NO than the methanol extract and other compounds. There were seventeen peaks coexisted with similarities above 0.95 and nine lupane-triterpenoids including acankoreaogenin and impressic acid detected and identified. The result of anti-inflammatory activities provides a potential explanation for the use of AGS leaves as a herbal medicine in the treatment of inflammatory diseases. Our results also show that acankoreanogenin and impressic acid may be potentially useful in developing new anti-inflammatory agents. In addition, the fingerprint chromatography clearly illustrated and confirmed the material basis for the anti-inflammatory activities of this plant.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.637-644
• /
• 2018

The air permeability of yellow poplar log cross section before and after organosolv pretreatment was investigated, and the moisture absorption of control and organosolv pretreated rectangular parallelepiped specimens was investigated in this study. It was revealed that the diameters of through pores were enlarged and the number of bigger pore was increased by the organosolv pretreatment. The air permeabilities of the cross sections of yellow poplar log were changed from 1.61 darcy to 23.30 darcy, but their weights were reduced by 5 percent. The equilibrium moisture content of control wood specimen at the exposed relative humidity were 5.9 % at 32 %, 9.7 % at 58 %, 14.8 % at 80.5 %, 19.7 % at 90 %, 25.7 % at 95 % and 29.9 % at 100%. The equilibrium moisture content of the specimens pretreated with the parameter of sulfuric acid catalyst of 0.5 % (w/w) were 19.5 % at 32 %, 29.3 % at 58 %, 39.6 % at 80.5 %, 59 % at 90 %, 111.3 % at 95 % and 111.3 % at 100 %, while those pretreated with the parameter of sulfuric acid catalyst of 1.0 % (w/w) were 17.4 % at 32 %, 23.9 % at 58 %, 27.7 % at 80.5 %, 40.6 % at 90 %, 68.8 % at 95 % and 110.0 % at 100 %. The moisture absorption of organosolv pretreated rectangular parallelepiped specimens was higher than that of control specimen.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.6
• /
• pp.433-440
• /
• 2007

Recently, the reduction of standby power consumption is significantly issued in electronic and electrical industry for the conservation of environment. In the case of a switched mode power supply (SMPS), it is demanded high efficiency at extremely low output power conditions by consumers. However, it is very different from high efficiency techniques at full load conditions. In addition, many SMPSs are designed as a multi-output circuit for various loads because of cost down. This circuit is difficult to implement both high efficiency and good cross regulation performance, simultaneously. In this paper, secondary side post regulator (SSPR), current mode control method, and power sequence control technique are proposed to reduce standby power consumption and to improve cross regulation performance of the multi-output SMPSs which consist of single or multiple converter. The proposed methods are analyzed by their operational principles and optimal designs verified by experimental results with 110[W] and 270[W] SMPSs.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.4
• /
• pp.102-110
• /
• 2009

In this paper, we propose an object detection method for real-time in infrared (IR) images and PowerPC (PPC) and H/W design based on field programmable gate array (FPGA). An open H/W architecture has the advantages, such as easy transplantation of HW and S/W, support of compatibility and scalability for specification of current and previous versions, common module design using standardized design, and convenience of management and maintenance. Proposed background modeling for an open H/W architecture design decreases size of search area to construct a sparse block template of search area in IR images. We also apply to compensate for motion compensation when image moves in previous and current frames of IR sensor. Separation method of background and objects apply to adaptive values through time analysis of pixel intensity. Method of clutter reduction to appear near separated objects applies to median filter. Methods of background modeling, object detection, median filter, labeling, merge in the design embedded system execute in PFC processor. Based on experimental results, proposed method showed real-time object detection through global motion compensation and background modeling in the proposed embedded system.