• Journal of the Korean GEO-environmental Society
• /
• v.18 no.5
• /
• pp.55-60
• /
• 2017

It is critical for Korea to make effective use of limited space as it has dense population and high traffic volume compared to its terrestrial area. To resolve this issue, diverse types of underground structures have increasingly been applied so far, and one of the most representative structures is double-deck tunnel. It has upper and lower roads separated by middle slab that shows dynamic behavior according to the vehicle and earthquake loads. In case of the characteristics of earthquake response, it is necessary to have exploratory study as it has high loads, complex working mechanism, and difficult theoretical approach. In order to understand the characteristics of earthquake response based on the supporting conditions of middle slab in double-deck tunnel, this study conducts indoor shaking table test with 3 test cases: (1) fix both brackets, (2) free and fix at each bracket and (3) free at both brackets for 2 seismic waves of artificial and Gyeongju earthquake. The result shows if the middle slab is free at both brackets, the acceleration response is reduced 41% for artificial earthquake and 60% for Gyeongju earthquake compared to the one with fix at both brackets.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.2
• /
• pp.167-174
• /
• 1989

AS a part of investigation to use anchovy more effectively as food source, this work was undertaken the processing conditions of extracts from rapid fermented anchovy sauce. To prepare rapid fermented products, the chopped anchovy was mixed with 50% water (w/w), and then hydrolyzed by autolysis or addition of koji under different conditions of hydrolysis. The optimal conditions for hydrolysis of chopped anchovy were revealed $50^{\circ}C$, 6 hours, pH 8.0 by autolysis, and ,$50^{\circ}C$, 6 hours, pH 7.0 by addition of 10% koji, respectively. But, pH control was not much beneficial in increasing yield. The effect of soybean protein isolote for improvement of bitter taste was also tested. The reasonable amount of added soybean protein isolate was revealed 5% on the weight basis of the chopped anchovy. The reaction mixture hydrolyzed under optimal conditions were added with 1% onion powder (w/w), 1% garlic powder(w/w) and 1% red pepper powder(w/w) for masking fishy odor, inactivated for 20 min at $100^{\circ}C$, and then centrifuged for 20 min at 4,000 rpm. The supernatant liquor was filtrated and evaporated to 50%(v/v). finally, table salt was added for bateriostatic effect and characteristic taste of rapid fermented products. the reasonable amount of added table salt was reversed 15% on the volume basis of the evaporated liquor. The hydrolysis ratio of product made by addition of water, product made by addition of koji and water, and product made by addition of soybean protein isolate, koji and water hydrolyzed under optimal conditions were 58.4%, 82.1% and 86.2%, respectively.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.2
• /
• pp.39-51
• /
• 2020

Recently, flood damage has been increasing in Korea due to frequent local torrential rains caused by abnormal weather conditions. According to the calculation of the recurrence period of torrential rain that occurred in North Chungcheong Province on July 16, 2017, it was estimated that the rainfall frequency in the upper are of Goessan Dam was around 1,524 years, and the highest level of Goesan Dam rose to EL.137.60 meters, leaving only 5 cm of margin until the height of the dam floor (EL.137.65 meters). The Goesan Dam, which operated for 62 years since 1957, needs to be prepared to cope with the increase of floodgate volume in the basin, the development of a single purpose dam for power generation only, and there are no measurement facilities for flood control, so efficient operation methods are needed to secure the safety of residents in upper and lower regions. In this study, a method of dam operation was proposed by constructing a rain matrix for quick decision making in flood prediction, calculating the highest level of dam for each condition in advance, and preparing a survey table, and quickly finding the level corresponding to the conditions in case of a situation.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.2
• /
• pp.67-76
• /
• 2006

For a hydro power plant project, the headrace tunnel having a finished diameter of 3.3 m was constructed in volcanic rocks with well-developed vertical joint and high groundwater table. The intake facility was located 20.3km upstream of the powerhouse and headrace tunnel of 20km in length and penstock of 440m in height connected the intake and the powerhouse. The typical caldera lake, Lake Toba set the geology at the site the caving of the ground caused tension cracks in the vertical direction to be developed and initial stresses at the ground to be released. High groundwater table(the maximum head of 20bar) in the area of well-connected vertical joints delayed the progress of tunnel excavation severely due to the excessive inflow of groundwater. The excavation of tunnel was made using open-shield type TBM and mucking cars on the rail. High volume of water inflowraised the water level inside tunnel to 70cm, 17% of tunnel diameter (3.9m) and hindered the mucking of spoil under water. To improve the productivity, several adjustments such as modification of TBM and mucking cars and increase in the number of submersible pumps were made forthe excavation of severe water inflow zone. Since the ground condition encountered during excavation turned out to be much worse, it was decided to adopt PC segment lining instead of RC lining. Besides, depending on the conditions of the water inflow, rock mass condition and internal water pressure, one of the invert PC segment lining with in-situ RC lining, RC lining and steel lining was applied to meet the site specific condition. With the adoption of PC segment lining, modification of TBM and other improvement, the excavation of the tunnel under severe groundwater condition was successfully completed.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.1
• /
• pp.33-40
• /
• 2008

Accuracy of dietary assessment depends on correct estimation of quantity as well as correct data on composition of the products. Milk and soymilk were considered quite homogeneous in items of package size and composition. One serving size of fluid milk and soymilk is considered 200 mL but there are products with different amounts on the market. This study was conducted to investigate variations of amounts and composition of fluid milk and soymilk products of one portion siz on Korean market. Twenty-nine milk products were purchased and categorized into 8 groups-regular, low-fat, skim, chocolate, strawberry-flavored, banana-flavored, and black soybean-added. Sixteen fluid soymilk products were purchased and categorized into 4 groups-regular, infant, black sesame or black soybean added and others. Actual volume of each product was measured by mass cylinder and compositions of major nutrients on the package were compared to the values in the most widely used nutrient DB in Korea. Amounts of milk specified on the package of purchased products were 182.3-318.5 ml, the largest being banana-flavored milk. Amounts of soy milk were 184.3-240.5 mL, the largest being regular soymilk. Measured amount of each products were close to the amount on the package (<5%). Contents of macronutrients on the package were different from the food composition table in several products. The amounts of calcium varied greatly among the products due to the popularity of adding calcium to milk and soymilk products recently. These variations in the amount and contents of major nutrients in milk and soymilk products can lead to considerable error to the results of dietary assessment unless the amount and the composition of each product are regularly updated in the food composition table whenever the new products are introduced in the market.

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.1
• /
• pp.45-53
• /
• 2008

Purpose: We are trying to analyze 130 patients' conditions by using our Helical Tomotherapy, which was installed in our center in Oct. 2007. We will be statistically approach this examination and analyze so that we will be able to figure out adaptive plans according to the change in place of the tumor, GTV (gross tumor volume), total amount of time it took, vector (${\upsilon}=\surd$x2+y2+z2) and the change in size of the tumor. Materials and Methods: Objectives were the patients who were medicated with Tomotherapy in our medical center since Oct. 2007 August 2008. The Average age of the patients were 53 years old (Minimum 25 years old, Maximum 83 years old). The parts of the body we operated were could be categorized as Head&neck (n=22), Chest (n=47), Abdomen (n=25), Pelvis (n=11), Bone (n=25). MVCT had acted on 2702 times, and also had acted on our adaptive plan toward patients who showed big difference in the size of tumor. Also, after equalizing our gained MVCT and kv-CT we checked up on the range of possible mistake, using x, y, z, roll and vector. We've also investigated on Set-up, MVCT, average time of operation and target volume. Results: Mean time on table was 22.8 minutes. Mean treatment time was 13.26 minutes. Mean correction (mm) was X=-0.7, Y=-1.4, Z=5.77, roll=0.29, vector=8.66 Head&neck patients had 2.96 mm less vector value in movement than patients of Chest, Abdomen, Bone. In increasing order, Head&neck, Bone, Abdomen, Chest, Pelvis showed the vector value in movement. Also, there were 27 patients for adaptive plan, 39 patients, who had long or multiple tumor. We could know that When medical treatment is one cure plan, it takes 32 minutes, and when medical treatment is two cure plan, it takes 40 minutes that one medical treatment takes 21 minutes, and the other medical treatment takes 19 minutes. Conclusion:With our basic tools, we could bring more accurate IMRT with MVCT. Also, through our daily image, we checked up on the change in tumor so that adaptive plan could work. It was made it possible to take the cure of long or multiple tumor, the cure in a nearby OAR, and the complicated cure that should make changes of gradient dose distribution.

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.2
• /
• pp.53-66
• /
• 2008

There was to purpose of this study improves analyzing cause that prosthesis brings bite engaging that is inaccurate in patient's mouth, when supposed that all conducts that do in operatory and dental laboratory are perfect. Impression did check bite by alginate impression material and polymerization style silicon impression material that use usually in presence at a sickbed Irreversibility, hydrocolloid, alginate impression material washed in flowing water and poured anhydrite after wait about 8 minutes so that region that charge interest after impression check bite may become undoing. And hydrophile property addition polymerization style impression material poured anhydrite after blow 30 considering impression material dwell time and H2 gas occurrence time (5~15 minute) after have washed in flowing water. I got each 7 models, result that manufactures total 28 and measures by third dimension measuring instrument (Meteo, Korea) following sequence curing in tray holder and floor 1, By Alginate impression when is hardened in tray holder and when is hardened in the floor after do check bite, SPH 4, SPH5 all as there is synonymy appeared(P<0.05). By in case do not use average 0.1741 in case use tray holder in 0.0447 SPH5s in case do not use average 0.2838 pastas in case use tray holder in SPH4 0.0309, When did not use both SPH4 and SPH5 tray holder, when used tray holder, 1 appeared more greatly. 2. By amity sex addition polymerization style silicon impression when is hardened in tray holder after do check bite and when is hardened in the floor SPH 4, a11 of the SPH5s very big synonymy be(P>0.05). And in case use tray holder in 0.000657 pasta SPH5s in case do not use average 0.000129 pastas in case use tray holder in SPH4 average 0.000114 pastas, by in case do not use 0.000757, I appeared more greatly when used tray when did not use both SPH4 and SPH5 tray holder, but 1 appeared is not level to keep in mind(Table 8~9). 3 SPH4 was looked very big mindfulness in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon without using tray holder(P< 0.001). I use tray holder and SPH4 did not appear synonymy in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon(P>0.05). Study finding of above when see synthesis Alginate certainly tray holder use must and I could know that hardening method does not exert big influence on volume stability if remove impression sieve of excess because amity sex accessory penalty silicon passes over tray, Also, Alginate impression material previewed can get heading a conspiracy style that volume stability of accessory penalty silicon impression material degree is if use tray holder.

• Radiation Oncology Journal
• /
• v.1 no.1
• /
• pp.21-24
• /
• 1983

The thickness of the part being irradiated is finite. Percent depth dose tables being used routinely are generally obtained from dosimetry in a phantom much thickner than usual patient. At or close to exit surface, the dose should be less than that obtained from the percent depth dose tables, because of insufficient volume for backscattering. To know the difference between the true absorbed dose and the dose obtained from percent depth dose table, the doses at or close to the exit surface were measured with plate type ionization chamber with volume of 0.5ml. The results are as follows; 1. In the case of $^{60}Co$, percent depth dose at a given depth increases with underlying phantom thickness up to the 5cm. 2. In the case of $^{60}Co$, the dose correction factor at exit surface which is less than 1, increases with part thickness and decreases with field size. 3. Exposure time may not be corrected when the part above 10cm in thickness is treated by $^{60}Co$. 4. In the case of 10MV x-ray, the dose correction factor is nearly 1 and constant for the underlying phantom thickness and field size, so the correction of monitor unit is not necessary for part thickness.

• Radiation Oncology Journal
• /
• v.14 no.4
• /
• pp.333-338
• /
• 1996

Purpose : To evaluate the clinical implications of scallop penumbra width that comes from multileaf collimator(MLC) effect by the daily routine patient setup error. Materials and Methods : The anales of $0^{circ},{\;}15^{circ},{\;}30^{circ},{\;}45^{circ},{\;}60^{circ},{\;}and{\;}75^{circ}$ inclined -radiation blocked fields were generated using the both conventional cerrobend block and the MLC. Film dosimetry in the phantom were performed to measure penumbral widths of differences between the dose distributions from the cerrobend block and those of respect the MLC. The patient setup error effect on scallop penumbra was simulated with respect to the table of setup error distribution. Same procedures are repeated for the cerrobend block generated field. Results : There are penumbral widths of to 3mm difference between the dose distributioins from two kinds of field shaping tools, the conventional block and the MLC with 4mm setup error model and resolution of 1cm leaf at the isocenter. Conclusion : We need not additive margin for MLC, if planning target volume is selected according to the recommendation of ICRU 50. For particular cases, we can include the target volume with less than 3mm additive margin.

• Korean Journal of Veterinary Research
• /
• v.15 no.2
• /
• pp.161-176
• /
• 1975

In order to evaluate the epizootiological influence of high-land on cattle feeding, routine hematological observation, with additional examinations of feces and general clinical condition, was conducted comparing the high-land cows resident at altitude of 800 to 1,200 meters in Daegwanryeong to the low-land cows resident at altitudes of less than 100 meters in Samcheok and Gangneung. The high-land cows were divided into 3 groups such as group A, B and C, consisting of 15, 16 and 20 adult cows respectively, and among the 3 groups only group C was exposed to abrupt high-land cold before observation. The low-land cows, that is group D, were consisted of 25 adult cows. The results obtained in the survey were summarized as follows: 1. Number of erythrocytes, concentration of hemoglobin and packed cell volume were remarkably higher (p<0.01) in all of 3 groups (group A, B and C) of high-land cows than trios of low-land cows (group D). These higher values in high-land cows were ascribable to the better feeding and hygienic management, and lesser infestation of small-type Piroplasma (Theileria) and internal parasites in contrast with the low-land cows. 2. Remarkably higher value of mean corpuscular volume (p<0.01) and a tendency to lower value of mean corpuscular hemoglobin concentration were noted in group D in contrast with group A, B and C. The reason was attributed to the higher infestation (p<0.01) of smalltype piroplasma in low-land cows in contrast with high-land cows. 3. It was noticiable that even though lesser infestation of small type Piroplama in the highland cows was shown, a natural case of clinical small-type-piroplasmosis was found in high-land group B as well as a case in the low-land group D. The blood Pattern showed characteristic macrocytic-hypochromic-anemia with increased reticulocytes in both two cases (Table 7). 4. In the observation of leukocytic series, marked increase of eosinophils in group D was seen in accordance with heavy infestation of gastrointestinal nematodes, and increased neutrophils with higher appearance of nonlobulated form and eosinopenia in group C only was observed suggesting the leukocytic response to the cold exposure in high-land. 5. Mean values of thrombocytes in group A,B,C and D were 48.4, 40.7, 42.7 and $32.3{\times}10^4/mm^3$ respcetively, and no statistically significant differences were observed.