• 한국멀티미디어학회논문지
• /
• 제8권10호
• /
• pp.1322-1328
• /
• 2005

점성 유체를 담고 쳐는 실린더가 회전운동을 시작하면 회전 원판의 원심력과 에크만 펌핑 효과에 의해 실린더 외벽의 각운동량이 유체에 전달되는 과정에서 자오면상의 유동이 생기게 되고, 이 때 유체의 특성에 따라 유동장의 운동량 획득 특성이 다르게 나타나게 된다. 본 연구에서는 뉴턴 유체와 비-뉴턴 유체의 유동장 획득에 대한 정보를 가시화 영상에서 검출하고 이를 기반으로 유체의 특성을 분석하는 방법을 제안한다. 영상으로부터 운동량이 가장 크게 변화하는 전단면(shear front)의 위치를 알아내기 위해서, 유체의 운동량이 영상에서의 밝기정보로 나타나도록 실험환경을 구성한다. 입력 영상으로부터 유체의 운동량과 흐름을 가시화 할 수 있도록 가시화 매개 물질을 사용하여 영상을 획득하고, 영상에서 에크만 경계층의 전단면을 찾아내어 이동거리를 계산함으로써 유체의 특성을 분석하는 방안을 제시한다. 또한 유동장에 대해, LDV(Laser Doppler Velocimetry)로 측정한 값과 영상으로부터 얻은 값을 비교함으로써 제안된 방법에 대한 정확성을 검증하고, 검증된 데이터를 기반으로 비-뉴턴 유체와 뉴턴 유체에 대한 특성을 분석한다.

• Journal of Plant Biotechnology
• /
• 제50권
• /
• pp.127-136
• /
• 2023

Water scarcity decreases the rate of photosynthesis and, consequently, the yield of banana plants (Musa spp). In this study, transcriptome analysis was performed to identify photosynthesis-related genes in banana plants and determine their expression profiles under water stress conditions. Banana plantlets were in vitro cultured on Murashige and Skoog agar medium with and without 10% polyethylene glycol and marked as BP10 and BK. Chlorophyll contents in the plant shoots were determined spectrophotometrically. Two cDNA libraries generated from BK and BP10 plantlets, respectively, were used as the reference for transcriptome data. Gene ontology (GO) enrichment analysis was performed using the Database for Annotation, Visualization, and Integrated Discovery (DAVID) and visualized using the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway prediction. Morphological observations indicated that water deficiency caused chlorosis and reduced the shoot chlorophyll content of banana plantlets. GO enrichment identified 52 photosynthesis-related genes that were affected by water stress. KEGG visualization revealed the pathways related to the 52 photosynthesisr-elated genes and their allocations in four GO terms. Four, 12, 15, and 21 genes were related to chlorophyll biosynthesis, the Calvin cycle, the photosynthetic electron transfer chain, and the light-harvesting complex, respectively. Differentially expressed gene (DEG) analysis using DESeq revealed that 45 genes were down-regulated, whereas seven genes were up-regulated. Four of the down-regulated genes were responsible for chlorophyll biosynthesis and appeared to cause the decrease in the banana leaf chlorophyll content. Among the annotated DEGs, MaPNDO, MaPSAL, and MaFEDA were selected and validated using quantitative real-time PCR.

• 해양환경안전학회지
• /
• 제14권1호
• /
• pp.21-27
• /
• 2008

삼각형상 구조물은 바다에서 풍요로운 어장을 만들기 위해 용승류를 발생시키기 위한 인공용승구조물의 기본적인 형태로 이용되고 있다. 인공용승류는 많은 양의 영양염류를 포함하고 있는 저층의 바닷물을 해저로부터 표층으로 끌어 올리는 작용을 한다. 이 연구의 목적은 여러 가지 성층계수에 따른 삼각형상 수중구조물 주위의 유동특성을 규명하는 것이다. 회류수조 내에서 삼각형상 구조물 모델을 대상으로 유동특성을 조사하기 위하여 유동가시화 방법을 이용한 실험적 연구를 수행하였고, 입자영상유속계(PIV)를 이용하여 수중구조물 주위의 유동장을 계측하였다. 실험결과 구조물 후상부 영역에서의 용승효과는 수심이 구조물 높이의 2배이고, 성층계수가 약 3.0일 때 가장 좋은 결과가 나타났다. 이러한 정량적인 데이터는 인공용승구조물의 기능적 효율을 결정하는 데에 유용하게 이용될 수 있을 것이다.

• 한국분무공학회지
• /
• 제27권2호
• /
• pp.57-65
• /
• 2022

The purpose of this study is to use machine learning to build a model capable of predicting the flash boiling spray characteristics. In this study, the flash boiling spray was visualized using Shadowgraph visualization technology, and then the spray image was processed with MATLAB to obtain quantitative data of spray characteristics. The experimental conditions were used as input, and the spray characteristics were used as output to train the machine learning model. For the machine learning model, the XGB (extreme gradient boosting) algorithm was used. Finally, the performance of machine learning model was evaluated using R² and RMSE (root mean square error). In order to have enough data to train the machine learning model, this study used 12 injectors with different design parameters, and set various fuel temperatures and ambient pressures, resulting in about 12,000 data. By comparing the performance of the model with different amounts of training data, it was found that the number of training data must reach at least 7,000 before the model can show optimal performance. The model showed different prediction performances for different spray characteristics. Compared with the upstream spray angle and the downstream spray angle, the model had the best prediction performance for the spray tip penetration. In addition, the prediction performance of the model showed a relatively poor trend in the initial stage of injection and the final stage of injection. The model performance is expired to be further enhanced by optimizing the hyper-parameters input into the model.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2006년도 Principles and Practice of Microarray for Biomedical Researchers
• /
• pp.71-76
• /
• 2006

Comparative genomic hybridization (CGH) is a technique for studying chromosomal changes in cancer. As cancerous cells multiply, they can undergo dramatic chromosomal changes, including chromosome loss, duplication, and the translocation of DNA from one chromosome to another. Chromosome aberrations have previously been detected using optical imaging of whole chromosomes, a technique with limited sensitivity, resolution, quantification, and throughput. Efforts in recent years to use microarrays to overcome these limitations have been hampered by inadequate sensitivity, specificity and flexibility of the microarray systems. The oligonucleotide CGH microarray system overcomes several scientific hurdles that have impeded comparative genomic studies of cancer. This new system can reliably detect single copy deletions in chromosomes. The system includes a whole human genome microarray, reagents for sample preparation, an optimized microarray processing protocol, and software for data analysis and visualization. In this study, we determined the sensitivity, accuracy and reproducibility of the new system. Using this assay, we find that the performance of the complete system was maintained over a range of input genomic DNA from 5 ug down to 0.15 ug.

• Archives of Plastic Surgery
• /
• 제47권5호
• /
• pp.428-434
• /
• 2020

Background Three-dimensional (3D) model printing improves visualization of anatomical structures in space compared to two-dimensional (2D) data and creates an exact model of the surgical site that can be used for reference during surgery. There is limited evidence on the effects of using 3D models in microsurgical reconstruction on improving clinical outcomes. Methods A retrospective review of patients undergoing reconstructive breast microsurgery procedures from 2017 to 2019 who received computed tomography angiography (CTA) scans only or with 3D models for preoperative surgical planning were performed. Preoperative decision-making to undergo a deep inferior epigastric perforator (DIEP) versus muscle-sparing transverse rectus abdominis myocutaneous (MS-TRAM) flap, as well as whether the decision changed during flap harvest and postoperative complications were tracked based on the preoperative imaging used. In addition, we describe three example cases showing direct application of 3D mold as an accurate model to guide intraoperative dissection in complex microsurgical reconstruction. Results Fifty-eight abdominal-based breast free-flaps performed using conventional CTA were compared with a matched cohort of 58 breast free-flaps performed with 3D model print. There was no flap loss in either group. There was a significant reduction in flap harvest time with use of 3D model (CTA vs. 3D, 117.7±14.2 minutes vs. 109.8±11.6 minutes; P=0.001). In addition, there was no change in preoperative decision on type of flap harvested in all cases in 3D print group (0%), compared with 24.1% change in conventional CTA group. Conclusions Use of 3D print model improves accuracy of preoperative planning and reduces flap harvest time with similar postoperative complications in complex microsurgical reconstruction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권6호
• /
• pp.2963-2978
• /
• 2017

The Top-K query is currently played a key role in a wide range of road network, decision making and quantitative financial research. In this paper, a Top-K recommendation algorithm is proposed to solve the cold-start problem and a tag generating method is put forward to enhance the semantic understanding of the OLAP session. In addition, a recommendation system for OLAP sessions called "OLAP4R" is designed using collaborative filtering technique aiming at guiding the user to find the ultimate goals by interactive queries. OLAP4R utilizes a mixed system architecture consisting of multiple functional modules, which have a high extension capability to support additional functions. This system structure allows the user to configure multi-dimensional hierarchies and desirable measures to analyze the specific requirement and gives recommendations with forthright responses. Experimental results show that our method has raised 20% recall of the recommendations comparing the traditional collaborative filtering and a visualization tag of the recommended sessions will be provided with modified changes for the user to understand.

• 한국지리정보학회지
• /
• 제9권1호
• /
• pp.1-12
• /
• 2006

공간분석에서는 사용되는 공간데이터 종류에 따라, 각각의 특징있는 분석법을 요구하므로, 다양한 접근법을 필요로 한다. 특히, 두 종류의 상이한 공간데이터 집합이 공존하는 경우, 어느 한 공간객체의 분포에 영향을 끼치는 다른 공간객체 집합에 대한 부분집합을 추출하여, 공간객체간의 관계성을 규명할 수가 있다. 지리정보시스템 등의 공간객체 분석기술의 발달로, 시각적으로도 간단히 공간객체간의 관계성을 파악할 수 있으나, 데이터의 양이 방대해지는 추세에서는, 지리정보시스템 (geographical information system)상에서 시각화된 공간객체 정보만으로는 서로 다른 공간객체간의 분포에서 상호관계성을 정량적으로 분석하기 어렵다. 따라서, 본 연구에서는 정량적 기준을 통해, 서로 다른 두 공간객체 간의 관계성 분석을 주목적으로 한다. 모델화된 정량적 기준의 평가를 위해 분석에 사용되는 실제 데이터는, 소규모 소매점포의 매출데이터를 사례로 들기로 한다. 데이터 수집에 제한이 있다는 특수환경으로 인해, 본 연구에서 사용되는 모델은 로짓모델을 기반으로 한 미지파라미터 추정이 가능하도록 구성되어있다. 제안된 모델을 사용하여, 대상점포의 매출분포에 큰 영향을 끼치는 것으로 판단되는 경쟁점포를 일련의 경쟁점포 집합에서 추출하며, 그 결과의 타당성을 검증하도록 한다.

• Imaging Science in Dentistry
• /
• 제52권3호
• /
• pp.303-308
• /
• 2022

Purpose: This technical report aims to describe and detail the use of micro-computed tomography for a reliable evaluation of the bulk-fill composite/tooth interface. Materials and Methods: Bulk-fill composite restorations in tooth cavities were scanned using micro-computed tomography to obtain qualitatively and quantitatively valuable information. Two-dimensional information was processed using specific algorithms, and ultimately a 3-dimensional (3D) specimen reconstruction was generated. The 3D rendering allowed the visualization of voids inside bulk-fill composite materials and provided quantitative measurements. The 3D analysis software VG Studio MAX was used to perform image analysis and assess gap formation within the tooth-restoration interface. In particular, to evaluate internal adaptation, the Defect Analysis addon module of VG Studio Max was used. Results: The data, obtained with the processing software, highlighted the presence and the shape of gaps in different colours, representing the volume of porosity within a chromatic scale in which each colour quantitatively represents a well-defined volume. Conclusion: Micro-computed tomography makes it possible to obtain several quantitative parameters, providing fundamental information on defect shape and complexity. However, this technique has the limit of not discriminating materials without radiopacity and with low or no filler content, such as dental adhesives, and hence, they are difficult to visualise through software reconstruction.

• 설비공학논문집
• /
• 제18권9호
• /
• pp.698-706
• /
• 2006

Experiment and numerical calculation have been peformed to investigate mixed convection heat transfer between inclined parallel plates. Particle image velocimetry (PIV) with thermo-sensitive liquid crystal (TLC) tracers is used for visualizing and analysis. This method allows simultaneous measurement of velocity and temperature fields at a given instant of time. Quantitative data of the temperature and velocity are obtained by applying the color-image processing to a visualized image, and neural network is applied to the color-to-temperature calibration. The governing equations are discretized using the finite volume method. The results are presented for the Reynolds number ranges from 0.004 to 0.062, the angle of inclination, ${\Theta}$, from 0 to 45 degree and Prandtl number of the high viscosity fluid is 909. The results show velocity, temperature and mean Nusselt numbers distributions. It is found that the periodic flow of mixed convection between inclined parallel plates is shown at $0^{\circ}{\leq}{\Theta}<30^{\circ}$, Re<0.062, and the flow pattern can be classified into three patterns which depend on Reynolds number and the angle of inclination. The minimum Nusselt numbers occur at Re=0.05 regardless of the angle of inclination.