• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.24-31
• /
• 2011

This study deals with the operational effectiveness of roundabout. The roundabout is currently under consideration in our country depending on the result of existing researches, that the roundabout decreases delay and is environmentally friendly compared to the signalized intersection. The purpose of the study is to analyze the operational effectiveness of the roundabout by the change of pedestrian traffic volume. In pursing the above, this study gave particular emphasis to designing a network of roundabout, developing some scenarios for analysis including both entering traffic volume and pedestrians volume, and comparatively analyzing the average controlled delay time per vehicle. In this study, VISSIM model was used as a tool for traffic simulation. The main results are as follows. First, as a result of analyzing a traffic delay based on the pedestrian traffic volume, pedestrian traffic volume was analyzed to have a great impact on the roundabout operation. Second, the more pedestrian traffic volume were evaluated to indicate the more traffic delay. When the entering volumes with 1,000persons/hour (pedestrian volume) were more than 800pcph in the single-lane and 1,600pcph in the double-lane roundabout, the operational efficiencies of signalized intersections were evaluated to be better than those of roundabouts.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.42-52
• /
• 2017

This was a study on the ultimate effect and characteristics of introducing a roundabout through a review of literature on the subject of roundabout. In order to examine an effect produced when roundabout is substituted for ordinary signal-controlled intersection operated at Daego Five-way Intersection and Seongmo Five-way Intersection located in Junggu, Daejeon Metropolitan City, site to be studied, the produced effect was analyzed through comparison between before and after introducing roundabouts in series at Daego Five-way Intersection and Seongmo Five-way Intersection by using microscopic traffic simulation program VISSIM widely used for analyzing an effect of roundabout based on a survey of geometric structure, traffic volume and signal interval on the site. As mentioned above, when Daego Five-way Intersection and Seongmo Five-way Intersection was changed to roundabout, a positive effect was produced on average speed and delay time in comparison with the existing status. It is possible to expect that roundabout can be more efficiently operated when 2 places on the site are changed to double roundabout than when separately changed to roundabouts.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.105-116
• /
• 2007

A ROUNDABOUT is more effective way to improve safety and prevent delays than signal intersection. ROUNDABOUT has been known highly safe treatment that could be used as a method to reduce conflicts between vehicles, to reduce travel speed in inner or approach of intersection, and to have no speed difference between drivers than intersection. In this study, the effective analysis on the installation of ROUNDABOUT was carried out using computer-based simulation tool VISSIM, in order to evaluate performance and safety of ROUNDABOUT and develope a warrant. In conclusion, the results indicated that there was remarkable increase of Y-intersection capacity and decrese of delay, and improvement of traffic safety. Finally, A nice feature of this study is to firstly attempt to use microscopic simulator to evaluate the effectiveness of ROUNDABOUT and suggest a passible operation boundary.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.145-153
• /
• 2009

Although an interest in higher design speeds continues to increase to promote more efficient travel on expressways, the current Korean design guidelines do not provide criteria for design values. An arising issue associated with higher design speeds is how to effectively ensure traffic safety under such high speed traffic conditions. In particular the safety issue would become more significant in determining the interchange spacing. This study proposes a methodology for determining freeway interchange spacing under higher speed traffic conditions. A microscopic traffic simulator, VISSIM, was used to evaluate the effects of various interchange spacings on traffic conditions in terms of safety. In this study, the acceleration noise was used as an index to represent the stability of traffic conditions, which is a potential indicator to quantify the level of safety. It was found based on simulation evaluations that 5-km interchange spacing would be a feasible alternative under higher speed traffic conditions (around 160 km/h).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.45-58
• /
• 2021

It is generally known that a two-lane roundabout has some problems in safety such as increasing conflicts, typically merging and diverging conflicts and conflicts between entering traffic and exiting as well as turning traffic. To solve these problems, a turbo-roundabout had been developed and has successfully brought safer and more efficient operation in other countries. In this study, micro simulations using VISSIM were conducted to investigate the maximum value of service traffic volume. It was found that operation of turbo-roundabouts was influenced by traffic volume for each turning traffic, and the maximum values of traffic volume were values between 2,400 and 2,800 vehicles per hour as rates of traffic volume for each turning traffic. Typically, turbo-roundabouts have limited to operate in conditions with more than 30% for left-turning traffic volume.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.4
• /
• pp.13-27
• /
• 2021

In this study, the impact of traffic flow on the market penetration rate of autonomous vehicles(AV) was analyzed using the data for the year 2020 of the Yongin IC~Yangji IC section of Yeongdong Expressway. For this analysis, a microscopic traffic simulation model VISSIM was utilized. To construct the longitudinal control of the AV, the Intelligent Driver Model(IDM) was built and applied, and the driving behavior was verified by comparison with a normal vehicle. An examination of the study results of mobility and safety according to the market penetration rate of the AV, showed that the network's mobility improves as the market penetration rate increases. However, from the point of view of safety, the network becomes unstable when normal vehicles and AVs are mixed, so there should be a focus on traffic management for ensuring safety in mixed traffic situations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.4
• /
• pp.18-29
• /
• 2022

Since the operation of an reft-turn actuated signal driven mainly by vehicles may increase the waiting time for walking, this signal causes inconvenience or stress to pedestrians. Therefore, in this study, the change in waiting time for walking before and after the application of an reft-turn actuated signal and the stress on the pedestrians were investigated through a questionnaire. The investigation showed that the waiting time for walking increased by 37% during non-peak time. Also the waiting time for walking of 62.1% of pedestrians became longer and 78% of them were stressed because of it. Meanwhile, simulation(VISSIM) showed that the vehicle travel speed slightly decreased to 1.07km/h(a 2.5% decrease), and the average waiting time for walking decreased by 15.51sec(a 28% decrease) with a pedestrian priority actuated signal. Therefore, it is expected that the pedestrian priority actuated signal can reduce the waiting time for walking and relieve pedestrian stress.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.3
• /
• pp.321-330
• /
• 2020

The purpose of this study is to present the appropriate standby space for the mechanical parking lot considered parking queue. This analysis is based on the field-study by results of the influential factors on the parking queue of mechanical parking lots in the commercial area of Gwang-ju metropolitan city. In this study, the parking queue was analized through the simple modeling using Vissim based on average service rate and average arrival rate from the result of field-study. As a result of applying the field survey products to the theoretical queue model, no significant result was obtained when the traffic intensity exceeded 1. Therefore, parking queue was analyzed through simple modeling using Vissim, and the model for calculating the proper parking queue size of the mechanical parking lot by size was derived. The model for estimating of an appropriate mechanical parking standby space considering parking queue presented in this study is expected to be a criterion for considering the appropriate parking space of a new building, and also it can be used to minimized the traffic impact due to the parking queue by the lack of standby space.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.478-487
• /
• 2015

This study proposed a Variable Speed Limits(VSL) algorithm to use traffic information based on Cumulative Demand-Capacity Analysis and evaluated its performance. According to the analysis result, the total of delay consisted of 3 separate parts. There was no change in total travel time although the total of delay decreased. These effects was analysed theoretically and then, evaluated through VISSIM, a microscopic simulator. VISSIM simulation results show almost same as those of theoretical analysis. Furthermore in SSAM analysis with VISSIM simulation log, the number of high risk collisions decreased 36.0 %. However, the total delay decrease effect is not real meaning of decrease effect because the drivers' desired speed is same whether the VSL model is operated or not. Nevertheless this VSL model maintains free flow speed for longer and increases the cycle of traffic speed fluctuation. In other words, this is decrease of delay occurrence and scale. The decrease of speed gap between upstream and downstream stabilizes the traffic flow and leads decrease number of high risk collision. In conclusion, we can expect increase of safety through total delay minimization according to this VSL model.

• Journal of Korean Society of Transportation
• /
• v.24 no.4 s.90
• /
• pp.93-101
• /
• 2006

The signalized intersections near highway-railroad grade crossing are operated without signal preemption in Korea when trains are approaching the crossing. This signal operation is very dangerous because queues from the intersection can extend back over the track, thereby creating the Potential for a serious vehicle-train accident. And the queues from the crossing can extend to the intersection with the normal signal operation while trains Pass the crossing. In this case the intersection is disrupted, and delay and the Potential for vehicle accident increase highly In order to improve the intersection performance and Protect the accident the crossings and intersections. signal Preemption designed to provide a special control mode should be implemented. In this study it was shown that intersection Performance near highway-railroad grade crossing improved using signal preemption. When signal Preemption is implemented at the test site, the delay was reduced by about 9sec/veh. Even though there were vehicle-train accidents at the crossing in all 30 simulations without signal preemption. there was no vehicle-train accidents at all when signal preemption is used.