• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.1
• /
• pp.27-34
• /
• 2015

For a vision-based driver assistance system, unusual motion detection is one of the important means of preventing accidents. In this paper, we propose a real-time unusual-motion-detection model, which contains two stages: salient region detection and unusual motion detection. In the salient-region-detection stage, we present an improved temporal attention model. In the unusual-motion-detection stage, three kinds of factors, the speed, the motion direction, and the distance, are extracted for detecting unusual motion. A series of experimental results demonstrates the proposed method and shows the feasibility of the proposed model.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.197-206
• /
• 2000

A hybrid control structure for vision-based soccer robot system is considered. The structure is om-posed of four levels such as the role action behavior and execution levels. The control structure which is a combination of hierarchical and behavioral structures can efficiently meet the behavior and design specifications of a soccer robot system Among the four levels only the design of the action level is proposed in the paper and is experimentally evaluated. Design hypothesis and evaluation method are presented to improve the reliability and accomplishment of the robot system. Due to the essential element of soccer robot system design a systematic design procedure of the action level is proposed With the proposed structure and algorithm of the action level the excellent result was shown at the MiroSot'98 held in France.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1104-1110
• /
• 2014

This paper investigates geometric effect of landmarks on three-dimensional navigation error in landmark-based vision navigation systems. Dilution of precision is derived for landmark measurement error on the focal plane of the camera and separately expressed in position DOP and attitude DOP. Values of DOP are observed for various configurations of landmarks.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.293-293
• /
• 2010

In this paper, we propose a stereo vision based monitoring concept for passenger's safety on railroad platform. In general, basic concept of stereo image processing technique uses the correlations between left and right images, and extracts additional distance information. It provides easy removal of ambient illumination changes, which has been difficult to achieve with conventional 2D based image processing technique. In the paper, we present developed stereo camera and stereo vision based detection algorithm in order to monitor possible accidents at platform area, and verified the detection performance of proposed system with experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.241-245
• /
• 2003

In this paper, a microassembly system based on hybrid manipulation schemes is proposed and applied to the assembly of a photonic component. In order to achieve both high precision and dexterity in microassembly, we propose a hybrid microassembly system with sensory feedbacks of vision and force. This system consists of the distributed 6-DOF micromanipulation units, the stereo microscope, and haptic interface for the force feedback-based microassembly. A hybrid assembly method, which combines the vision-based microassembly and the scaled teleoperated microassembly with force feedback, is proposed. The feasibility of the proposed method is investigated via experimental studies for assembling micro opto-electrical components. Experimental results show that the hybrid microassembly system is feasible for applications to the assembly of photonic components in the commercial market with better flexibility and efficiency.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.92-99
• /
• 2003

Quality inspection of textile products is an important problem for fabric manufacturers. This paper presents an automatic vision-based system for quality control of web textile fabrics. Typical web material is 1-3m wide and is driven with speeds ranging from 20m/min to 200m/min. At the present, the quality assessment procedures are performed manually by expert. But worker can not detect more than 60％ of the present defect and inspect the fabric if moving faster than 30m/min. To increase the overall quality and homogeneity of textile, an automated visual inspection system is needed fur the productivity. However, the existing inspection system are too expensive to purchase for small companies. In this paper, the proposed PC based real-time inspection algorithm gives low cost textile inspection system, high detection rate with good accuracy and low rate of false alarms. The method shows good results in the detection of several types of fabric defects.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.554-557
• /
• 2002

This paper describes power potential field method for the collision-free path planning of stereo-vision based mobile robot. Area based stereo matching is performed for obstacle detection in uncertain environment. The repulsive potential is constructed by distributing source points discretely and evenly on the boundaries of obstacles and superposing the power potential which is defined so that the source potential will have more influence on the robot than the sink potential when the robot is near to source point. The mobile robot approaches the goal point by moving the robot directly in negative gradient direction of the main potential. We have investigated the possibility of power potential method for the collision-free path planning of mobile robot through various experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.36-48
• /
• 2010

This paper is concerned with stereo vision-based approach to detect obstacles and to generate the path of destination from the start. The hexapod robot in the experiment is cable of walking by legs and driving by wheels simultaneously. The hexapod robot operates under the driving mode normally, and it changes driving mode to walking mode to overcome obstacles using its legs. Disparity map, which is the correlation between two images taken by stereo camera, is employed for calculation of the distance between the robot and obstacles. When the obstacles information is extracted from the disparity map, the potential field algorithm is applied to create the obstacle-avoidance path. Simulator, based on OpenGL, is developed to generate the graphical path, and the experimental results are shown for the verification of the proposed algorithm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.5
• /
• pp.735-743
• /
• 2012

In this paper, we present model predictive control (MPC) applied to lane keeping system (LKS) based on a vision module. Due to a slow sampling rate of the vision system, the conventional LKS using single rate control may result in uncomfortable steering control rate in a high vehicle speed. By applying MPC using multi-rate Kalman filter to active steering control, the proposed MPC-based active steering control system prevents undesirable saturated steering control command. The effectiveness of the MPC is validated by simulations for the LKS equipped with a camera module having a slow sampling rate on the curved lane with the minimum radius of 250[m] at a vehicle speed of 30[m/s].

• Journal of information and communication convergence engineering
• /
• v.16 no.2
• /
• pp.114-124
• /
• 2018

This paper illustrates a vision-based vehicle positioning method at an intersection to support the C-ITS. It removes the minor shadow that causes the merging problem by simply eliminating the fractional parts of a quotient image. In order to separate the occlusion, it firstly performs the distance transform to analyze the contents of the single foreground object to find seeds, each of which represents one vehicle. Then, it applies the watershed to find the natural border of two cars. In addition, a general vehicle model and the corresponding space estimation method are proposed. For performance evaluation, the corresponding ground truth data are read and compared with the vision-based detected data. In addition, two criteria, IOU and DEER, are defined to measure the accuracy of the extracted data. The evaluation result shows that the average value of IOU is 0.65 with the hit ratio of 97%. It also shows that the average value of DEER is 0.0467, which means the positioning error is 32.7 centimeters.